Find Verified Cobalt Chromium Alloy Elgiloy Suppliers, Manufacturers and Wholesalers

Electrolytic Cobalt , Cobalt Cathode Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packi Purity: 99.95% min. Size as follows: full plate: 950~970-800~830mm cathode (cut): around 50*50*7 mm Noted: other purities and size available upon request

Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packing Product name: cobalt plate, cobalt sheet Material: 99.9% min cobalt Size: thickness: 0.025mm min Width: 600mm max According to your request Technique: cold-rolled, hot-rolled Condition: annealed Applications: chemical industry, mechanical equipment, chemical engineering

Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�°C, reduced to CoO at 200�°C, and reduced to cobalt metal at 250�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.

1. Product name: Cobalt powder 2. Purity: 99.9%min 3. Particle size: 50nm, 5-10um, 325mesh, etc 4. Cas No: 7440-48-4 5. Appearance: gray black powder Characteristic. Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation, aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine. As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant. Application -Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance. -Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.

We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol

Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. The Incoloy825 has the following functions: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion Good oxidation resistance and non oxidative thermal acidity. It has good mechanical properties at room temperature and high temperature up to 550 Certification of pressure vessels with manufacturing temperatures up to 450 C Incoloy 825 metallographic structure: Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization. Incoloy825 Corrosion resistance: Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550. Typical applications include: Heating pipes, containers, baskets and chains for sulfuric acid pickling plants. Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline. Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production. Air heat exchanger in petroleum refining Food Engineering chemical process Flame retardant alloy for high-pressure oxygen Product name INCOLOY Alloy 825 Grade INCOLOY Alloy 825 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Ti AI P C Ni Cr Mo INCOLOY Alloy 825 2 0.8 0.1 - 0.02 42 21 3

The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase. The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance. The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion. Product name ALLOY 20 STAINLESS STEEL Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment. INCOLOY Alloy 825 Standard Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249) Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2 Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3 Drinking water tube: GB / T 19228 Mechanical tube: ASTM A554, EN 10296-2 Size Outer Diameter Range: 9.5~2000mm Thickness Range: 0.5~20mm (Size can be customized.) Length: Up to 11.8 meters per piece. Shape Section Round, square, rectangular Usage Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on; Heat exchanger tube: condenser, boiler, super heater, evaporator and so on; Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on; Mechanical tube: handrail, railings, balustrade, hence and so on. Features: 1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m. 2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing. 3. Thick welding, good appearance.The mechanical properties of tube could be tested. 4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015. 5. Full material traceability is guaranteed during the manufacturing process. 6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness. 7. Internal Bore: Tubes have a smooth, clean and crevice free bore.