is a flexible plastic sheeting containing numerous small air pockets, used in cushioning items during shipment. Standard average bubble diameter is 6.0 - 25.4 mm and height about 4 mm. Bubble wrap is lightweight, water resistant, reusable non-scratching.
- Air bubble wrap's surface contains air bubbles which protect a fragile products, picture, crystal, electronic components, household items and it can be used as a cheap packaging material
- Insulating air bubble wrap is good for the thermal insulation(40~50%), sound insulation(20~30%) and high capability in fireproof with an excellent cost-effectiveness.
These bags are made of anti-shock bubble film, there are various sized bubbles in the film which makes the bag light, elastic, sound insulating, shock resistant and free from scrapes.
At the same time, according to the different requirements of customers, kraft paper bubble bag, aluminum film bubble bag can be made as well.
Moreover, different additives can be mixed into the raw materials which make all sorts of special bubble bag possible to produce. Antistatic air cushion bag, designed for packaging of electronic components like integrated circuit board, cards, etc, can prevent electrostatic and can act as a cushion.
2.Composition:
Air bubble film ldpe
3. Applications:
The bag is mainly applied to the packaging of pcb and electronic components sensitive to static electricity.
- Low cost protection for all products
- Our small bubble wrap rolls are manufactured using air retention technology which protects your product with long term cushioning properties. Air retention technology prevents the bubble cells from collapsing and reducing the amount of air escaping meaning protection is maintained throughout packing, transit and storage.
- The protective air-filled bubbles cushion fragile products to prevent breakage. This small bubble wrap is lightweight and flexible not only making it ideal for wrapping or interleaving a variety of products but also reducing delivery costs. Small bubble wrap rolls are available in various widths and no cutting is required; the wrap tears in a tidy, straight line.
- Sold in rolls, priced per pack.
- Quantity Available in packs of 1, 2 or 5 depending on the roll size.
- Size and shape options Our 100 metre rolls can be used to protect products of all sizes and are available in a flexible range of widths including: 300/500/600/750/1000/1200 and 1500mm.
- Weights and limits Strength is measured in microns. These impact-resistant rolls are 40 microns in thickness. Each bubble has a diameter of 9.5mm and a height of 4.2mm.
- Materials Dimond Impex small bubble wrap is made from 2 layers of low density polyethylene with a co-extruded air retention barrier seal.
- Environmental information the long lasting cushioning performance of this bubble wrap enables it to be re-used. Less plastic material is used at source due to using a thinner co-extruded film compared to other non-barrier bubble.
- Delivery information Delivered sealed in a poly bag for instant use.
19864 Bubble Wraps Suppliers
Short on time? Let Bubble Wraps sellers contact you.
This product is made of polyethylene and applies to the packaging of light products. Being a kind of mature packaging material, it has good cushioning effect and shock reduction function through the sealed air bubble chambers. The anti-static air bubbles bag and air bubble sheet can prevent products from damage due to collision, attrition, or static during production or delivery process. With both the inner and surface resistance of 108-1010¦¸, it is mainly used for the packaging of electronic components and pc boards. Its material structure, size and color can all be customized.
Material: 100% recycled kraft paper
Size: 0.5 x 40m
Product Weight: 1.5kg
Packaging: 1roll/carton
Carton Size: 42 x 42 x 52 cm
Gross Weight: 2kg/carton
Flower Wrapping Paper with Gold Edge Waterproof Bouquet Wrapping Paper for DIY Wedding & Birthday
Occasions: Ideal for various occasions including Weddings, Birthdays, Parties, Anniversaries, Christmas, Halloween, Office events, and Gift-wrapping.
Material: High-quality waterproof paper with a luxurious gold edge finish
Model Number: 260001
Origin: Made in Thailand
Perfect for DIY enthusiasts, this elegant wrapping paper adds a touch of sophistication to any bouquet or gift, making it a stylish choice for special celebrations.
The polyboll machine is customizable with different options as moulder cylinders with different bubbles size, third and fourth layer unit, automatic loader for pellets, etc.
The twin bubble machine allow to produce in-line (without further steps) an air bubble film for insulation applications composed of: two layer of air bubble film laminated with coated aluminium foil on the external side. The machine can produce, of course, air bubble film in 2 or 3 layers for the packaging market.
The twin bubble system has the following characteristics:
Two extruder for the production, at the same time, of the two layers of air bubble film and one, placed in the middle, for their lamination.
Two interchangeable forming cylinders
Rewinder with automatic cycle that allow to produce rolls from 25 up to 150 mt and more.
Possibility to add two additional lamination unit by hot air in order to laminate a layer of foam in the centre of the material (between the two layers of air bubble film).
Recommend for the air bubble film production for insulation market
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are:
Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods.
Better protection with thinner plastic film: it means better performance with less raw material consumption.
Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times.
Recyclable : the co-extruded bubble film could be recycled with other polyethylene material
An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process.
Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure.
You can easily understand the co-extrusion process through the following layout:
The COEX BUBBLE plant has got the following features:
Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure.
Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron.
Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded.
Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability.
Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production.
The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature.
Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request)
The plant can be equipped (also after installation, thanks to its modularity) with several accessories:
Moulder cylinder with bubble in different diameters
Perforation unit with brushless motor
Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films
Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing
Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder
Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue.
The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono).
The plant Power Bubble put together all the modern technologies and stand out for the following characteristics:
Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity.
Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries.
Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times
Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability.
Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant.
The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature
Produced air bubble film width from 1.000mm to 2.500mm (or more on request)
The plant can be equipped (also in a second time thanks to its modularity) with various accessories:
Forming cylinders with bubbles in different sizes
Perforating unit equipped with brushless motor.
Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films
Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing
Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder
Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded
Ink-jet printing unit to personalize the material with logos and symbols
