Valor is capable of manufacturing anti-wear lining pipes, elbows, cyclone devices, valves and other equipment components. Pipelines and equipment parts are machining according to customer required geometry shapes, flanges as well as the selected connecting parts. All the linings can achieve effective wear-resistant protection for the grinding
Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available.
Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
We are distributors of brass coated Rasper.
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.
We are supplier and exporter of All types of ceramic Tiles. We have been exporting Ceramic Tiles to more than 15 countries. We deal in most of the Sizes and Variety of Tiles ie :- 1. 300X450 MM Wall tiles 2. 300X600 MM Wall tiles / Vitrified Tiles 3. 200X600 MM Wall tiles 4. 300X300 MM Wall tiles 5. 250X375 MM Wall Tiles 6 600X600 MM Vitrified Tiles / Double Charge / Full body tiles / Porcelain tiles 7 600X1200 MM Vitrified Tiles /Full body tiles 8 Slab Tiles 9 Subway Tiles 10 Quartz Stone 11 Engineered stone
Dinnerware Type: Dishes & Plates Pattern Type: Plant Plate Type: Plate Dish Shape: Square Technique: Handpainted Commercial Buyer: Bubble tea,Juice & Smoothie Bars, Super Markets, Hotels, Drug Stores, Cafes and Coffee Shops, Discount Stores Season: Everyday Design Style: Craftsman, CLASSIC Quantity: >10 Material: ceramic Feature: Sustainable, Stocked Place of Origin: Vietnam Brand Name: 99 GOLD DATA Model Number: Selena +84 587 176 063 Product Name: Porcelain Tableware Usage: Home Hotel Restaurant Color: Customized Color Type: Hotel Dinnerware Keyword: Disposable Dinnerware Sets Supply Ability 300 Set/Sets per Week Packaging Details Safely and securely packed in 480x430x350 (cm) cardboard boxes (Size depends on the product) Port Ho Chi Minh
Material: Ceramic Holiday selection: Valentine's Day, Mother's Day, Father's Day, Eid holidays, Chinese New Year, Oktoberfest, Christmas, New Year's, Easter Day, Thanksgiving, Halloween Room space selection: Desktop, Kitchen, Patio, Closet, Bathroom, Bedroom, Dining Room, Dorm Room, Indoor and Outdoor, Living Room, Office, Outdoor
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Product Name : Faucet Product Description : We supply faucets/ taps for washbasin, shower room, bathtubs, kitchen sink etc- brass, Stainless Steel, ABS with Chrome, Antique finish etc. Our faucets are tested for long use either with European make ceramic disc or Chinese make ceramic discs. Please contact us for details. Key Words : Faucets, Taps, shower Mixer, Bathtub mixer
Authorized selling agent for Dolphin Nitrile Glove ready stock Production Origin : Malaysia Fob : Hong Kong
Ready stock of Edge 82-133 / 300 pcs per box Origin : Malaysia Moq 1,000,000 boxes, first trial order 100,000 boxes 20000 boxes per container Fob : Manila
Ready stock Hartalega Coats 200 pcs ready stock.
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Oxygen Concentrator - 0.5-10L/Min Purityï¼? 96% Compressor Life - 25000hours Sound Level 60dB Screen - LED Segment real-time display Power comsumption - 500VA Net Weight - 23k Gross weight:27kg
Technical data: Oxygen flow:0.5-5L/min Oxygen concentration:95.5%-87% Output pressure: 40-70kPa Pressure relief mechanism operational at: 250kPa + 25kPa Operation nose Level
