This FiberHTT 1550 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The SFP+ 80km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Cisco Compatible 10G 1550nm 80KM SFP+ Optical Transceiver Item NO.:ESP5592-3LCD80 Date rate: 10G Distance: 80KM Connector: LC Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pcs/package Features 1.Hot pluggable 2. 1550nm cooled EML, APD Receiver 3.Up to 80km on 9/125um SMF 4. SFP+ MSA package with duplex LC connector 5. SFI High Speed Electrical Interface 6.Very low EMI and excellent ESD protection 7. +3.3V single power supply 8. Case temperature range: -5â?? to 70â??. 9. 2-wire interface for management and diagnostic monitor 10. 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ZR/ZW 11. Power dissipation < 1.5W Applications 1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface 4.Switched backplane applications 5.Router/Server interface 6.Other optical transmission systems
10G 1550nm SM 80KM LC SFP+ Transceiver Specification: Data rate:10G Wavelength:1550nm Distance:80KM Interface:LC Fiber:SM Place of origin:Made in China Port:Shenzhen Working temperature: Commercial:0°C to +70°C;Industrial:-40°C to +85°C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 296038504500, HUAWEI, the pole into, Dlink, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Function:Photoelectric conversion module Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
This product is for external use or can be used for inhalation: Headache, dizziness, flu, motion sickness: Rub the oil on both temples and nape, rub into the nostrils, on both sides of the nose. Can be steamed: Put about 1-2 chopsticks of high oil into boiling water to steam when you have a cold. When bitten by mosquitoes and other insects: Rub the ointment on the area of the insect bite.
Specification Data rate: 1.25g Wavelength: tx1550/rx1490nm Distance: 80km Interface: lc Fiber: sm Ddm: yes Place of origin: made in china Port:shenzhen Working temperature: commercial: 0â°c to +70â°c;industrial:-40â°c to +85â°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package 10g sfp+ optical transceiver Etu model cisco model product description Esp8592-3lcd03 sfp-10g-sr 10g sfp+ sr mm 850nm 300m lc connector with ddm Esp3192-3lcd02 sfp-10g-lrm 10g sfp+ lr mm 1310nm 220m lc connector with ddm Esp3192-3lcd10 sfp-10g-lr 10g sfp+ lr sm 1310nm 10km lc connector with ddm Esp5592-3lcd40 sfp-10g-er 10g sfp+ er sm 1550nm 40km lc connector with ddm Esp5592-3lcd80 sfp-10g-zr 10g sfp+ zr sm 1550nm 80km lc connector with ddm Sfp optical transceiver Etu model cisco model product description Es8512-3lcd05 glc-sx-mm 1.25g sfp mm 850nm 550m lc connector with ddm Es3112-3lcd10 glc-lh-smd 1.25g sfp sm 1310nm 10km lc connector with ddm Es3112-3lcd40 glc-ex-smd 1.25g sfp sm 1310nm 40km lc connector with ddm Es5512-3lcd80 glc-zx-smd 1.25g sfp sm 1550nm 80km lc connector with ddm Es3103-3lcd2 glc-ge-100fx 155m sfp mm 1310nm 2km lc connector with ddm Es-t1-rj45 glc-t 1000m copper-t rj45 100m
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Commodity: Sodium bicarbonate Synonym: Baking Soda; Bicarbonate of soda; Sodium acid carbonate; Monosodium carbonate; Sodium hydrogen International CHEMTREC , carbonate; Carbonic acid monosodium salt Molecular formula:NaHCO3 Molecule Weight:84.01 H.S code:28363000 CAS:144-55-8 Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air. Quality Standard Item The National Standard The Total Alkalinity Content(NaHCO3)% 99.0, 100.5 Loss on Dring% 0.20 PH Value(10g/1) Solution, 8.6 Arsentic Content% 0.0001 Heavy Metal Content, 0.0005 Ammonium Salt pass Clearness pass Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc. Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag. (We can meet with all your demands according with your need.)
Compatible Transceiver SFP-10G-SR 10G SFP+ Transceiver 850nm 300M MM Optical Module Specification Data rate: 10G Type: SFP+ Distance: 300M Connector: LC DDM: Yes Place of origin: Made in China Port:Shenzhen Features 1.Optical interface compliant to IEEE 802.3ae 2.Electrical interface compliant to SFF-8431 3.Hot Pluggable 4.850nm VCSEL transmitter, PIN photo-detector 5.Maximum link length of 300m on 2000MHz/km MMF 6.Operating case temperature: 0 to 70 °C 7.Low power consumption 8.Maximum link length of 300m on 2000MHz/km MMF 9.All-metal housing for superior EMI performance 10.Advanced firmware allow customer system encryption Information to be stored in transceiver 11.Cost effective SFP+ solution, enables higher port densities and greater bandwidth 12.RoHS6 compliant (lead free) Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package 10G SFP+ optical transceiver ETU Model Cisco Model Product description ESP8592-3LCD03 SFP-10G-SR 10G SFP+ SR MM 850nm 300M LC connector with DDM ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM ESP3192-3LCD10 SFP-10G-LR 10G SFP+ LR SM 1310nm 10KM LC connector with DDM ESP5592-3LCD40 SFP-10G-ER 10G SFP+ ER SM 1550nm 40KM LC connector with DDM ESP5592-3LCD80 SFP-10G-ZR 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM SFP optical transceiver ETU Model Cisco Model Product description ES8512-3LCD05 GLC-SX-MM 1.25G SFP MM 850nm 550M LC connector with DDM ES3112-3LCD10 GLC-LH-SMD 1.25G SFP SM 1310nm 10KM LC connector with DDM ES3112-3LCD40 GLC-EX-SMD 1.25G SFP SM 1310nm 40KM LC connector with DDM ES5512-3LCD80 GLC-ZX-SMD 1.25G SFP SM 1550nm 80km LC connector with DDM ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
Compatible Transceiver SFP-10G-SR 10G SFP+ Transceiver 850nm 300M MM Optical Module Specification Data rate: 10G Type: SFP+ Distance: 300M Connector: LC DDM: Yes Place of origin: Made in China Port:Shenzhen Features 1.Optical interface compliant to IEEE 802.3ae 2.Electrical interface compliant to SFF-8431 3.Hot Pluggable 4.850nm VCSEL transmitter, PIN photo-detector 5.Maximum link length of 300m on 2000MHz/km MMF 6.Operating case temperature: 0 to 70 °C 7.Low power consumption 8.Maximum link length of 300m on 2000MHz/km MMF 9.All-metal housing for superior EMI performance 10.Advanced firmware allow customer system encryption Information to be stored in transceiver 11.Cost effective SFP+ solution, enables higher port densities and greater bandwidth 12.RoHS6 compliant (lead free) Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package 10G SFP+ optical transceiver ETU Model Cisco Model Product description ESP8592-3LCD03 SFP-10G-SR 10G SFP+ SR MM 850nm 300M LC connector with DDM ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM ESP3192-3LCD10 SFP-10G-LR 10G SFP+ LR SM 1310nm 10KM LC connector with DDM ESP5592-3LCD40 SFP-10G-ER 10G SFP+ ER SM 1550nm 40KM LC connector with DDM ESP5592-3LCD80 SFP-10G-ZR 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM SFP optical transceiver ETU Model Cisco Model Product description ES8512-3LCD05 GLC-SX-MM 1.25G SFP MM 850nm 550M LC connector with DDM ES3112-3LCD10 GLC-LH-SMD 1.25G SFP SM 1310nm 10KM LC connector with DDM ES3112-3LCD40 GLC-EX-SMD 1.25G SFP SM 1310nm 40KM LC connector with DDM ES5512-3LCD80 GLC-ZX-SMD 1.25G SFP SM 1550nm 80km LC connector with DDM ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
Vietnamese Golden Star Balm Type: 4g, 10g, 20g, .
The Hengtaitong SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA
Hand sanitizer, face mask (3 ply and n 95), examination gloves and surgical gloves, pulse oximeter, surgical cotton, cotton rolls (10g to 500g), cotton balls, gauze bandages, microporous surgical tapes, cotton pharmaceutical coil, jet fuel a1, en 590 10 ppm, light crude oil, brazilian icumsa 45 sugar.Exporter
Colour: Brown/Black/Yellow Origin: Indonesia/Malaysia/Philippines Quantity: 1000~5000Kg Packing: Dried/Frozen Size: 10g - 500g/pc Species: All types
This FiberHTT 1310nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Cisco HUAWEI ZTE Compatible 1.25G 1550nm SM 120KM SFP Optical Transceiver with DDM Specification Data rate: 1.25G Wavelength: 1550nm Distance: 120KM Interface: LC Fiber: SM DDM: Yes Place of origin: Made in China Port:Shenzhen Working temperature: Commercial: 0°C to +70°C;Industrial:-40°C to +85°C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package 10G SFP+ optical transceiver ETU Model Cisco Model Product description ESP8592-3LCD03 SFP-10G-SR 10G SFP+ SR MM 850nm 300M LC connector with DDM ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM ESP3192-3LCD10 SFP-10G-LR 10G SFP+ LR SM 1310nm 10KM LC connector with DDM ESP5592-3LCD40 SFP-10G-ER 10G SFP+ ER SM 1550nm 40KM LC connector with DDM ESP5592-3LCD80 SFP-10G-ZR 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM SFP optical transceiver ETU Model Cisco Model Product description ES8512-3LCD05 GLC-SX-MM 1.25G SFP MM 850nm 550M LC connector with DDM ES3112-3LCD10 GLC-LH-SMD 1.25G SFP SM 1310nm 10KM LC connector with DDM ES3112-3LCD40 GLC-EX-SMD 1.25G SFP SM 1310nm 40KM LC connector with DDM ES5512-3LCD80 GLC-ZX-SMD 1.25G SFP SM 1550nm 80km LC connector with DDM ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
Features: Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 100GHz ITU Grid, C Band DWDM EML transmitter,APD photo-detector SMF links up to 80km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast
10G 1550nm SM 80KM LC XFP Transceiver Specification: Data rate:10G Wavelength:1550nm Distance:80KM Interface:LC Fiber:SM Place of origin:Made in China Port:Shenzhen Working temperature: Commercial:0°C to +70°C;Industrial:-40°C to +85°C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Function:Photoelectric conversion module Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Brix 67.5 +/- 0.3 Sulfated Ash (%) 0.05 max pH 7.0 - 8.0 Invert (% Dry Basis) 0.30 max Sediment 4 ppm max Color Clear to light straw Microbiological Limits Mesophilic Bacteria 200 cfu/10g max Yeast 10 cfu/10g max Mold 10 cfu/10g max Sensory Characteristics Appearance Clear Liquid Taste Sweet, Bland Odor Characteristic
