The 10.1 inch LCD Touch Display (Model No. WTY101B36A01LM) is of a color tft lcd display panel with 1280×800 resolution and standard 40pin LVDS interface, which support sunlight readable, IPS full viewing, optical bonding/tape bonding. The touch panel is of a G+G structure capacitive touch panel, which is composed of a cover glass, sensor glass, driver IC and FPC. It is driven by a GOODIX GT9271 IC Chip, which utilizes an I2C interface and supports 10 points touch.
Brand: Innolux Size: 7.0 inches Resolution: 800x3 (RGB) x 480 Aspect ratio: 16:9 Module size: 164.9 x 100 x 5.7mm Active area: 154.08 x 85.92mm Viewing angle: 50/70/70/70 Operating temperatures: -20 to 70°C Storage temperatures: -30 to 80°C Brightness: 400cd/m2 Interface: RGB/TTL (50-pin)
The 4.3 inch LCD Touch Display (Model No. WTY043734A01LMI) is of a color tft lcd display panel with 800×480 resolution and standard 40pin RGB interface, which support sunlight readable, high brightness, tape bonding, wide temperature. The touch panel is of a G+G structure capacitive touch panel, which is composed of a cover glass, sensor glass, driver IC and FPC. It is driven by a N8110 IC Chip, which utilizes an I2C interface and supports 5 points touch
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m�²/sec (max.) - Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5
Size:1.77 inch tft lcd module Part no.:ct018bde05 Application Digital products, industrial display, instrument and other electronic products which require color tft displays. Other information Stable supply, high quality, competitive price. Lead time: 4-5 weeks. Normally have stocks. Our standard/ negotiable
Product specification/models Size:, 2.0 inch tft lcd module Stable supply, high quality, competitive price. Lead time: 4-5 weeks. Normally have stocks. Standard/negotiable
Product feature Low cost, good quality, stable supply. Product specification/models Size:, 2.4 inch tft lcd module Application Digital products, industrial display, instrument and other electronic products which require color tft displays. Other information Stable supply, high quality, competitive price. Lead time: 4-5 weeks. Normally have stocks. Standard/negotiable
Product specification/models Size:2.8 inch tft lcd module Part no.:ct028phj12 Resolution:240 (rgb), ¢320 Display type:normally white, transmissive 37pin Driving ic:ili9341 or equivalent Interface:8080 8/16-bits cpu Module size(mm):50.0(w) , ¢69.2 (h), ¢3.65(t) Active area(mm):43.2(w) , ¢57.6(h) Touch panel: with Backlight:led backlight Application Digital products, industrial display, instrument and other electronic products which require color tft displays. Other information Stable supply, high quality, competitive price. Lead time: 4-5 weeks. Normally have stocks Standard/negotiable
Product specification/models Size:2.7 inch tft lcd module Part no.:ct027bhj15 Resolution:240¨¢960 Display type:normally white, transmissive 24pin Driving ic:ili8961 or equivalent Interface:rgb 8bits Module size(mm):46.6(w) ¨¢63.5(h)¨¢2.75(t) Active area(mm):40.50(w) ¨¢54.00(h) Touch panel: without Backlight:led backlight Application Digital products, industrial display, instrument and other electronic products which require color tft displays. Other information Stable supply, high quality, competitive price. Lead time: 4-5 weeks. Normally have stocks. Standard/negotiable
Model Number: TST280QV02AR TFT Size: 2.8 Inch tft lcd module Resolution: 240*320 Viewing Angle: 12 O'clock Active Area: 43.2x57.6 Outline dimension: 50*69.2*3.35 LCD Type: TFT Positive Transmissive Interface: MCU Driver IC: ILI9341 Application: Industrial Application Backlight: 4 CHIP- White LED light Packed in anti-static bag each,a certain quantity in one carton
Main Parameters: Item 4.3 inch TFT LCD screen Model name TST043015CMHX-P Display Mode Normally White,Transmissive Resolution 480*RGB272 Driver IC HX8257A Pixel arrangement R.G.B. Vertical Stripe Outline Dimension 105.5x67.2x4.2(Typ.) Active Area(mm) 95.04(H)x53.856(V) Interface RGB Viewing Direction 12 O'clock Surface treatment: Anti-Glare Touch Panel Optional Luminance(cd/m2) 480 Backlight 10pcs. white LED Operating Temperature -20~70¡ãC Storage Temperature -30~+80¡ãC TFT LCD Module series: 1. Our standard tft lcd module size: 1.44", 1.77", 2", 2.4", 2.8", 3", 3.2", 3.5", 4"(3.97"), 4.3", 5", 5.6", 5.7", 7", 8", 10.1". 2. New products: 3.5", 4.3", 5.0", and 7" TFT LCD with CTP and MCU interface . 3. 2.2", 3.5" transflective/ sun readable tft lcd. 4. Our Specials Technology : can make AR( Anti-reflective), AF(Anti-fingerprint),AG(Anti-Glare)and also use EWV(extremely wide view) polarizer. 5. Specails items: 4.3'' 5.0'' 7.0'' developed 1000nits brightness. Delivery: Shipping via DHL, UPS,TNT, FedEx Express, Air mail, and seamail. Our service: 1. Custominzed TFT module. 2. Do OEM &ODM fro TFT LCD Module pannel. 3. Good quality and quick reply Our Advantages for LCD pannel 1. FOG automatical device can ensure the capacity of 1000,000 per month. 2. MOQ can be 100pcs, lead time of standard products is 20 days. 3. Reliability test and full examination to ensure the high quality of the display. 4. OEM&ODM are provided for TFT/TN LCD/Plastic Moulding. 5. Strictly ISO quality management system. 6. Mature and Professional R&D and after service. 7. Various cooperation experience with big brands. Any questions and interests,pls contact us at any time! Skype&Email:sales1@tslcd.com Website:www.tslcd.com Packed in anti-static bag each,a certain quantity in one carton
1LCD size1.54 inch(Diagonal) 2Driver elementTFT active matrix 3Resolution240RGBx240 4Display modeNormally Black, Transmissive IPS 5Active area27.72(W) 27.72(H) mm 6Module size31.5(W) 35.0(H) 1.8(D) mm 7Color arrangementRGB-stripe 8Viewing angleALL 9Brightness500 cd/m2 10InterfaceIPS 11Controller ICILI9341V 12Contrast ratio800 13Touch panelOptional 14Operating temperature-20ºC~+70ºC 15Storage temperature-30ºC~+80ºC
Place of origin: beijing, china (mainland) Brand name: stone Model number: sti043wt-01 Type: tft Series: industrial type Size: 4.3 inch 480*272 (16:9) Viewing area: 95.0*53.9 mm Interface: rs-232 / ttl / rs-485 / usb Perpheral apparatus: with high-precision touch-screen Tft-lcd: a class industry screen Packaging details: By cartons Delivery detail: 7 days
Type: TFT Display Size: 4.3 Inch Supplier Type: Manufacturer Place of Origin: Guangdong, China Brand Name: TSD Display mode: a-Si TFT, Normally Black, Transmissive, IPS Resolution: 480*272 Viewing Direction: All O'CLOCK Outline Dimension(W*H*D): 105.5(W)*67.2(H)*3.05(D) Active Area: 95.04(W)*53.86(H) Driver IC: ST7282 Backlight Type: 16 LEDs,40mA,24.2V Surface Luminance: 900(typ) Interface: RGB With/Without TP: without
1.1 Introduction Display model P024C015-V2 is a (TM)Transmissive type color active matrix thin Film transistor(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device.This model is composed of a TFT LCD panel, a driving circuit, a back light system. The resolution of a 2.4â?? contains 240RGBx320 dots and can display up to 65k colors. 1.2 Features n MCU 8bit/16bit parallel interface. 1.3 Applications n MPOS Device. n Personal Navigation Device. n Other devices which require high quality displays.
