Drill pipe is made of high quality material detected by spectrograph, impact and tension test.Our drill pipe has two material, s135 and g105. With fully digitized processing line introduced from japan with integral heat treatment equipment anti adhesion thread with nitrogen treatment on surface make it easier for handling. Metallography detection, hardness test, magnaflux inspection, ultrasonic flaw detection, tensile test and impact test ensure products quality.
Drilling Spool is the parts which are often used in the oilfield for well head extension, choke and kill manifold, etc. It is designed and manufactured is accordance with API 6A and API 17K standard, it usually has the same nominal end connections. Eternal company specializes on the manufacturing all sizes and pressure ratings used for oilfield applications. So many spools have been applied on many oilfields all over the world. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom, and side end connections can be hub end or flanged. We can also design customizable ideal spools for reliable and consistent performance on their production system. Our products have been exported to many countries, such as Russia, South Africa, India etc. Send your inquiry message to Anna Zhang in the comments section below:
Deadline anchors, Wireline anchors Anchor Type Weight Indicator System is compatible with various versions of drilling rigs and workover rigs. They indicate and record variation of hook load and weight on bit during drilling and well service for the driller judging the operation situation and obtain proper drilling parameters. Each set of weight indicating system consists of a deadline anchor, a weight indicator and a recorder. Can be used in drilling rig, workover drilling rig etc. Material is High strength steel, extended the service time. 1.5 times pressure and tensile test before leaving the factory, high precision, stability, etc. Two forms, horizontal and vertical. Model JZG18A Deadline Anchor -Max deadline load(Line pull capacity):180kN -With hydraulic load sensor. -Constructed with top-quality steel and proof-tested to 150% of rated capacity. -Accommodate wireline sizes 1'',1-1/8'' or specify. -Designed and tested for high strength, long life and exceptional accuracy. -Floor mount. -In accordance with API Standards, pass API8C Certificate, API ISO9001:2000
* description: The roller reamer (drilling reamer) is used for all kinds of reaming stabilization in drilling operation, especially the function of stabilization in drilling of the abrasive formation. It is a hot-sale tool for hole size from 4 5/8â?� to 26â?�. Additionally, it can be used in different hole when same body is equipped with different bearing block and rollers. * feature: A. The body is made of high quality alloy steel, fully heat treated to 285-341brinell hardness and 54j minimum impact strength. B. Rollers can be changed easily at the well.
XSL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?� SL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?�
The Safety Clamp is one of the most valuable tools for well drilling. It helps guard against dropping flush-joint pipe, streamlined drill collars, etc. into the hole while making-up or breaking-out the string. It is necessary tools for drill rig while drilling operation is ongoing. The Safety Clamp can be deviled into MP, the WA-T and WA-C type. MP-S /MP-R /MP-M /MP-L /MP-XL
Application: Used as Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressures in oil drilling and natural gas exploration work (including 50D, 70D). Temperature Range: -30�°C~ 120�°C, or manufactured upon customers' requirements Hose Reinforcement:2~ 6 layers spiraled by single high-strength steel wire, and rubber as a binder to make the layers into one complete and sound construction Lining: Principally NBR constructed, featuring oil-resistant, abrasion-resistant, acid, alkali & flame resistant. Hose Cover: Primarily CR fabricated, featuring oil-resistant, abrasion-resistant, weatherproof and anti-ageing Coupling Type: NKT 60X2.5 , HAMMER UNION 1502 , BSPT 4" Reference Standard: API Spec 7K,ISO 6807
As a manufacturer and a supplier we produce cementing tools since 1997, and now we have almost 400 workers, the products cover cementing head/plug, stage collar, float equipment, centralizer and so on. Please contact me if you have need, and my email is Maggie@pyzs-group.com, WhatsApp is +8613939319501. Our website is www.pyzs-group.com The casing head is a kind of part of connecting casings and wellheads. It is used to support the weight of technical casing and intermediate casing and seal the annular space between the casings, which provides a transition joint for the installation of the tubing head, Christmas tree and other wellheads. The two-side-outlet design allows the casing head to supply cement, monitor and control well's sinking, and inject balance liquids etc. Casing head design features a 45 degree landing shoulder. This design avoids damage to sealing areas by drilling tools and prevents test plug and blow protector wedging problems when pressure is applied. This design also allows for accurate vertical positioning of annular seals, control line porting and test ports.
Cement Basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. It is designed with Flexible Bow Springs, heat-treated under controlled conditions for maximum strength and uniformity, are welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operations.
What is the feature of 17 1/2tricone drill bit? 1.The strength and wear resistance of inserts are improve by using carbide inserts with high strengthand high wear resistance. 2.Surface of the high precision bearing heat treated by using advanced heat treatment process to improve the load capacity and service life of the bearing. 3.The service life of the bearing is further extended by adopting harder and mort wear resistant material for thrust bearing. 4. Preventing reflux structure has dual function, it can avoid air counterflow and dust entering into bearing when the air-compressor stop working accidentally, and separate air and water in order to avoid water entering into bearing when it works normally to prolong the life of bearing 5.This series oil well rock bit use Sealed roller bearing structure. With rollers arranged in grooves recessed in the cone body, the size of the bearing journal is increased. 6.Thrust bearing surfaces are hardfaced and treated with friction reducing technology. 7.This series oil well rock bit use Journal bearing. Hardfaced head bearing surface. Cone bearing inlaid with friction reducing alloy and then silver-plated. The load capacity and seizure resistance of the bearing is greatly improved. What is the superiority of 17 1/2tricone drill bit? 1. It can recycle; it just consume one third of its lifespan in oil exploration process. 2. It can withstand high wob under the conventional drilling rate.
1: OD: 89mm ( 3 1/2 inch) thread drill pipe 2: Connection:90mm/95mm/105mm 3: Grade: E75/R780/N80 4: Length: 9meters or as your requirement 5: Suitable for water well, geothermal well, gas well 6: Safe drilling depth: Within 800 meters 7: Tool joint:35GrMo/40Cr/4137H
Casing is used for fastening oil and gas well wall or borehole,with bigger diameter than tubing ,including surface casing,technical casings and oil layer casing . Usage: Petroleum Casting Tube, Oil Pipe, Steel tubing, Casing, Drill pipe Standard: ISO, API 5CT, API 5D, API 5L provide: size:4-1/2 5 5-1/2 6-5/8 7 7-5/8 8-5/8 9-5/8 10-3/4 11-3/4 13-3/4 13- 3/8 16 18-5/8 20 OD:114.3-508.0mm weight :9.5-133.0b/ft Thickness :5.21-16.13mm Type of end :J55/K55 M65 L80/C95 N80 C90/T95 P110 Q125
1.Description: The mechanical-hydraulic drilling jar is a jarring and stuck releasing tool. It integrates the up jar and down jar and can release the stuck accident occurring during drilling operation. The drilling jar is an ideal tool for directional well and deep well drilling. Operating principle 1.Operating principle of up jar Lifting drilling tool, slip assembly which bear the acting of dish reed elastic force and slip locking force compels latch mechanism of slip clasp slip mandrel. While slip mandrel up run with mandrel to overcome slip locking force and damping action between hydraulic valve assembly and spindle extension, jar Make drill stem accumulate energy, delay time. When mandrel up run to the state of release constraint, elastic potential energy accumulated in drill stem will convert to upward kinetic energy, generate up jar. If need sequence up jar, you need fed off drilling tool till relock latch mechanism, reduplication above process, Generate sequence up jar. 2.Operating principle of down jar The loosen load of down jar lock can be transfer as per in demand .There are a certain ratio between up locking force and down locking force , and the ratio is adjustable. If down jar, fed off drilling tool until pressure reach to down locking force, jar should generate down jar force. If need to repeat jar, lifting drilling tool to anew securing position repeat above process.
1.Description: The mechanical-hydraulic drilling jar is a jarring and stuck releasing tool. It integrates the up jar and down jar and can release the stuck accident occurring during drilling operation. The drilling jar is an ideal tool for directional well and deep well drilling. Operating principle 1.Operating principle of up jar Lifting drilling tool, slip assembly which bear the acting of dish reed elastic force and slip locking force compels latch mechanism of slip clasp slip mandrel. While slip mandrel up run with mandrel to overcome slip locking force and damping action between hydraulic valve assembly and spindle extension, jar Make drill stem accumulate energy, delay time. When mandrel up run to the state of release constraint, elastic potential energy accumulated in drill stem will convert to upward kinetic energy, generate up jar. If need sequence up jar, you need fed off drilling tool till relock latch mechanism, reduplication above process, Generate sequence up jar. 2.Operating principle of down jar The loosen load of down jar lock can be transfer as per in demand .There are a certain ratio between up locking force and down locking force , and the ratio is adjustable. If down jar, fed off drilling tool until pressure reach to down locking force, jar should generate down jar force. If need to repeat jar, lifting drilling tool to anew securing position repeat above process. Main feature: Drilling jar with national oilwell varco Hydromechanical drilling jar halliborton Operating manual double acting drilling jar Used in geothermal drilling and wells
Best quality api 7-1 standard and sprial drill collar Product description Drill collar is the basic component in the bha which provide weight on the bit for dirlling and keeps the drill string in tension.Drill collar is manufactured from aisi 4145h modified quenched and tempered steel and is heat treatment along its entire length for uniform toughness and durability. Srict netallurgical test are performed pre specifications to ensure that the heat treatment produces consisitent and maxium hardness through the depth of the bar. Feartures and benefits: 1. Hardness rannge of 285 to 341 bhn and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature 2.Connections ar phosphate coated afther machinning to protect the threads from corrosive elements and to prevent galling upon initial make -up Thread roots are cold rolled on api and h0-90 connections 3.Pressed steel thread protectors are supplied fo all drill collar that are equipped with standard connection
1. Main Technical Parameters: (1). Model: DU. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (2). Model: DU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (3). Model: DU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (4). Model: DUL. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (5). Model: DUL. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (6). Model: DUL. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (7). Model: SDU. Size of Slip Bodies: 4 1/2". DP O.D. (in): -. DP O.D. (mm): -. (8). Model: SDU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (9). Model: SDU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. 2. Product Description: Drill pipe slip is a kind of handling tools specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling. There are three types of DU series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. There into, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Suitable for shallow hole drilling, medium depth drilling and deep drilling. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Casting. 6. Machine Type: Drilling Tool. 7. Use: Well Drilling.
1. Main Technical Parameters: (1). Model: DCS-S. Drill Collar O.D. (in): 3-4. Drill Collar O.D. (mm): 76.2-101.6. Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3. (2). Model: DCS-S. Drill Collar O.D. (in): 4-4 7/8. Drill Collar O.D. (mm): 101.6-123.8. Weight (kg): 47. Weight (lb): 103. Use in Insert Bowl No.: API or No. 3. (3). Model: DCS-R. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4. Weight (kg): 54. Weight (lb): 120. Use in Insert Bowl No.: API or No. 3. (4). Model: DCS-R. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8. Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3. (5). Model: DCS-L. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6. Weight (kg): 70. Weight (lb): 154. Use in Insert Bowl No.: API or No. 3. (6). Model: DCS-L. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3. Weight (kg): 78. Weight (lb): 173. Use in Insert Bowl No.: API or No. 3. (7). Model: DCS-L. Drill Collar O.D. (in): 8 1/2-10. Drill Collar O.D. (mm): 215.9-254. Weight (kg): 84. Weight (lb): 185. Use in Insert Bowl No.: No. 2. (8). Model: DCS-L. Drill Collar O.D. (in): 9 1/4-11 1/4. Drill Collar O.D. (mm): 235-285.7. Weight (kg): 90. Weight (lb): 198. Use in Insert Bowl No.: No. 2. (9). Model: DCS-L. Drill Collar O.D. (in): 11-12 3/4. Drill Collar O.D. (mm): 279.4-323.9. Weight (kg): 116. Weight (lb): 256. Use in Insert Bowl No.: No. 1. (10). Model: DCS-L. Drill Collar O.D. (in): 12-14. Drill Collar O.D. (mm): 304.8-355.6. Weight (kg): 107. Weight (lb): 237. Use in Insert Bowl No.: No. 1. 2. Product Description: Drill Collar Slips are specially developed to handle drill collars during well drilling. There are three types of DCS Drill Collar Slips: S, R, and L. They can accommodate drill collars from 3 in (76.2 mm) to 14 in (355.6 mm) O.D.. The handling sizes can be adjusted by changing the quantity of inserts or slip body. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe.
1. Main Technical Parameters: (1). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3-4 1/2. Drill Collar O.D. (mm): 76.2-114.3. Use in Insert Bowl No.: API or No. 3. (2). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3 1/4-4 3/4. Drill Collar O.D. (mm): 82.55-120.65. Use in Insert Bowl No.: API or No. 3. (3). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 4 1/4-5 3/4. Drill Collar O.D. (mm): 107.95-146.05. Use in Insert Bowl No.: API or No. 3. (4). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8. Use in Insert Bowl No.: API or No. 3. (5). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.5-209.55. Use in Insert Bowl No.: API or No. 3. (6). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 8 1/4-10. Drill Collar O.D. (mm): 209.55-254. Use in Insert Bowl No.: No. 2. (7). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 10-11 3/4. Drill Collar O.D. (mm): 254-298.45. Use in Insert Bowl No.: No. 2. 2. Product Description: Drill Collar Slips are specially developed to handle drill collars during well drilling. Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes of outer diameter after abrasion of drill collar. They are with light weight, large handling scale and reliable quality. This kind of slips are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Forging. 6. Machine Type: Drilling Tool. 7. Use: Well Drilling. 8. FAQ: Why you need to choose Lake Petro? As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer. Can you make us the best quality products as well as a good price? Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe. What is special compare with other companies? First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
1. Main Technical Parameters: (1). Model: WT 4 1/2-6. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4. Weight (kg): 49. Weight (lb): 108. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (2). Model: WT 5 1/2-7. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8. Weight (kg): 46. Weight (lb): 101. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (3). Model: WT 6 3/4-8 1/4. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6. Weight (kg): 42. Weight (lb): 92. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (4). Model: WT 8-9 1/2. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3. Weight (kg): 39. Weight (lb): 86. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. 2. Product Description: Drill Collar Slips are specially developed to handle drill collars during well drilling. Drill Collar Slips Type WT can accommodate drill collars from 4 1/2 in (114.3 mm) to 9 1/2 in (241.3 mm) O.D.. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Forging. 6. Machine Type: Drilling Equipment. 7. Use: Well Drilling. 8. FAQ: Why you need to choose Lake Petro? As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer. Can you make us the best quality products as well as a good price? Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe. What is special compare with other companies? First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
1. Main Technical Parameters: (1). Use for product: W-SDS Rotary Slips. Pipe size (in): 2 3/8"~4 1/2". (2). Use for product: W-SDML Rotary Slips. Pipe size (in): 2 3/8"~5 1/2". (3). Use for product: W-SDXL Rotary Slips. Pipe size (in): 3 1/2"~5 1/2". (4). Use for product: 3 1/2~5 Rotary Slips. Pipe size (in): 3 1/2"~5". (5). Use for product: 5~7 Rotary Slips. Pipe size (in): 5"~7". (6). Use for product: W3 1/2"-75 (125) Rotary Slips. Pipe size (in): 2 3/8", 2 7/8", 3 1/2". (7). Use for product: 5-75 (125 200) Rotary Slips. Pipe size (in): 4", 4 1/2", 5". (8). Use for product: DCS-S Drill Collar Slips. Pipe size (in): 3"~4 7/8". (9). Use for product: DCS-R Drill Collar Slips. Pipe size (in): 4 1/2"~7". (10). Use for product: DCS-L Drill Collar Slips. Pipe size (in): 6 3/4"~14". (11). Use for product: WT Drill Collar Slips. Pipe size (in): 4 1/2"~11 3/4". (12). Use for product: 8" Drill Collar Slips. Pipe size (in): 8". (13). Use for product: 9" Drill Collar Slips. Pipe size (in): 9". (14). Use for product: Casing Slips. Pipe size (in): 6 5/8"~30". (15). Use for product: WA-C Safety Clamps. Pipe size (in): 3 1/2"~15 5/8". (16). Use for product: WA-T Safety Clamps. Pipe size (in): 1 1/8"~4 1/2". (17). Use for product: QQ P60-89/585 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2". (18). Use for product: QQ P60-89/675 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2". (19). Use for product: QQ P60-127/900 Pneumatic Spider. Pipe size (in): 2 3/8"~5". (20). Use for product: Well Repair Manual Tongs. Pipe size (in): 2 3/8"~10 3/4". (21). Use for product: B Manual Tongs. Pipe size (in): 2 3/8"~12 3/4". (22). Use for product: DB Manual Tongs. Pipe size (in): 3 1/2"~17". (23). Use for product: 13 3/8 Casing Manual Tongs. Pipe size (in): 13 3/8". (24). Use for product: Q13 3/8-30 Casing Manual Tongs. Pipe size (in): 13 3/8"~30". (25). Use for product: Tubing and Workover Tongs. Pipe size (in): All size available. (26). Use for product: Drill Power Tongs. Pipe size (in): All size available. 2. Features: (1). The dies made from high-quality alloy steel in our company. (2). The dies are chemically heat-treated for surface hardness. (3). The dies and slip inserts are wear-raciting, corrosion-resistance. (4). Customized products are available. (5). Qualified API certified manufacture.
