We are mainly for customers to provide a variety of pipelines. The pipes we sell include plastic pipes, PVC pipes, HDPE pipes, LDPE pipes, PE pipes, PPR pipes, PC pipes, ABS pipes, PA pipes, PU pipes, hoses, soft tubes, all kinds of plastic granule materials, and recycled regrind materials. Gi pipes, stainless steel pipes, seamless pipes, MS pipes, carbon steel, composited pipes, water tubes, corrugated pipes, fittings, valves, flanges, nuts, and screws. And other environmental plastic and stainless steel pipes for residential construction households. With meeting international standard quality, the pipes are of different thicknesses, lengths, and applications.
We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products. Products are:- Low Carbon Silico Manganese. Typical Specifications are: Mn: 55 % Minimum Si: 25-28% C: 0.2% Maximum P: 0.15% Maximum Size: 10-150 MM (90%) Medium Carbon Silico Manganese. Typical Specifications are: - Mn: 55%-60% Si: 22%-25% Max C: 0.5% Max Si: 0.05% Max P: 0.2%-0.40% Size: 10-150 MM (90%) For sure, we will be able to meet the requirements, once we get your reply
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Slip On Flange: slip-On,Welding Neck,SocketWelding Blind Thread Lap-Joint Long Welding Neck,Light Weight Orifice 4 Pressure: Class150,300,600,900,1500,2500 5 Materials: Forged Carbon Steel,Stainless Steel,Alloy Steel, ASTM A105,A105N,ASME SA105,SA105N,St37.2 ASTM A694-F42,F46,F48,F50,F52,F56,F60,F65 ASTM A182,F304,304L,F316,316L,F321,F11
Steel flanges, pipe flanges, flanges stainless steel flanges, carbon steel flanges, alloy steel flanges, flanges.
Carbon steel flanges are a type of flange that is made of carbon steel. Carbon steel is a type of steel that contains carbon as its primary alloying element. Carbon steel flanges are typically used in applications where strength and durability are important. They are also relatively inexpensive, making them a cost-effective option for many applications. Technical Specifications 1. Material: Carbon steel 2. Size: �½ Inch to 24 Inch 3. Type: RF, FF, RTJ 4. Pressure rating: Class 150 to 2500 5. Temperature range: -200�°F to 1200�°F 6. Finish: Black, mill scale, or hot dipped galvanized 7. Dimensions: ANSI/ASME B16.5, DIN 2533, or MSS SP-44 Applications a. Oil and gas pipelines b. Chemical processing plants c. Power plants d. Water treatment facilities e. HVAC systems Advantages 1. Strength 2. Durability 3. Inexpensive 4. Wide variety of applications
Mild Steel Flanges are a type of flange made from mild steel. Mild steel is a low-carbon steel that is strong and ductile, making it a good choice for flanges that need to be able to withstand high pressures and temperatures. Mild Steel Flanges are typically used in a variety of industries, including the oil and gas industry, the chemical industry, and the water treatment industry. Technical Specifications 1. Material: Mild Steel 2. Size: ½ Inch to 24 Inch 3. Type: RF, FF, RTJ 4. Pressure rating: Class 150 to 2500 5. Carbon Content: 0.05%-0.25% 6. Yield Strength: 370 MPa 7. Tensile Strength: 440 MPa 8. Hardness: 126 Brinell 9. Temperature Rating: Up to 500�°F 10. Dimensions: ANSI/ASME B16.5, DIN 2533, Other Features Mild Steel Flanges are available in a variety of sizes and styles, including slip-on flanges, weld neck flanges, and socket weld flanges. They can also be finished in a variety of ways, including hot dip galvanizing, painting, and powder coating. Applications a. Oil and gas industry b. Chemical industry c. Water treatment industry d. Power generation industry e. HVAC industry f. Marine industry Advantages A. Strong and ductile B. Affordable C. Widely available D. Easy to fabricate E. Can be finished in a variety of ways
A stainless steel flange is a type of flange that is made of stainless steel. Stainless steel is a corrosion-resistant alloy of iron, chromium, and nickel. It is commonly used in applications where corrosion resistance is important, such as in the chemical, food, and pharmaceutical industries. The technical specifications of a stainless steel flange will vary depending on the type of flange, the material grade, and the pressure rating. However, some common specifications include: Nominal pipe size (NPS): The NPS is the standard size of the pipe that the flange will be used with. Pressure rating: The pressure rating is the maximum pressure that the flange can withstand. Material grade: The material grade is the type of stainless steel that the flange is made of. Common material grades include ASTM A182 F304 and F316. Face type: The face type is the shape of the flange's face. Common face types include raised face (RF), flat face (FF), and ring-type joint (RTJ). Bolting arrangement: The bolting arrangement is the number and size of the bolts that are used to connect the flanges. Here is a more detailed description of the different types of stainless steel flanges: Weld neck flange: A weld neck flange is a type of flange that has a neck that is welded to the pipe. This type of flange is typically used for high-pressure applications. Slip-on flange: A slip-on flange is a type of flange that is slipped over the pipe and then secured with bolts. This type of flange is typically used for lower-pressure applications. Socket weld flange: A socket weld flange is a type of flange that has a socket that is welded to the pipe. This type of flange is typically used for smaller pipes. Lap joint flange: A lap joint flange is a type of flange that is joined to the pipe by overlapping the flanges and then welding them together. This type of flange is typically used for low-pressure applications. Blind flange: A blind flange is a type of flange that does not have a hole in the center. This type of flange is typically used to terminate a pipe. Stainless steel flanges are a versatile and reliable component that can be used in a wide variety of applications. They are available in a variety of types, sizes, and pressure ratings to meet the specific needs of each application.
A carbon steel flange is a type of flange that is made of carbon steel. Carbon steel is a type of steel that contains carbon as its primary alloying element. The carbon content in carbon steel can vary from 0.002% to 2.1%, but most carbon steels have a carbon content of between 0.2% and 0.8%. he following are some of the key technical specifications of carbon steel flanges: Pressure rating: The pressure rating of a flange is the maximum pressure that the flange can withstand without leaking. Class: The class of a flange is a measure of the flange's strength. The higher the class, the stronger the flange. Size: The size of a flange is the diameter of the flange's bore. Type: There are many different types of carbon steel flanges, including slip-on flanges, weld neck flanges, and socket weld flanges. Finish: The finish of a flange is the surface texture of the flange. The most common finishes for carbon steel flanges are smooth and rough. Carbon steel flanges are a versatile and reliable type of flange that can be used in a variety of applications. They are available in a wide range of sizes, classes, and types, so you can find the perfect flange for your needs. The technical specifications of a carbon steel flange vary depending on the standard that it is manufactured to. Some of the most common standards for carbon steel flanges include: ASTM A105N (SA105N): This standard specifies the requirements for carbon steel forgings for piping applications. ASTM A350 LF2: This standard specifies the requirements for low-alloy steel forgings for piping applications. ASTM A694: This standard specifies the requirements for flanges for high-pressure service. The following are some of the key technical specifications of carbon steel flanges: Material: Carbon steel Pressure rating: Varies depending on the standard Temperature rating: Varies depending on the material and the standard Face type: Plain, raised face, or ring joint Bore size: Varies Wall thickness: Varies Finish: Varies
Carbon Steel Forged flanges are a type of flange that is commonly used in high-pressure piping systems. They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel. Forged flanges are stronger and more durable than cast flanges, making them a better choice for applications where high pressure and/or temperature are present. Benefits of CS Forged Flanges â?¢ High strength and durability â?¢ Better resistance to corrosion and wear â?¢ Can withstand high pressure and temperature â?¢ Available in a variety of sizes and materials Applications of CS Forged Flanges â?¢ Piping systems â?¢ Valves â?¢ Pumps â?¢ Heat exchangers â?¢ Pressure vessels Types of CS Forged Flanges â?¢ Slip-on flanges â?¢ Socket weld flanges â?¢ Lap joint flanges â?¢ Threaded flanges â?¢ Blind flanges â?¢ Spectacle blind flanges Selection of CS Forged Flanges When selecting forged flanges, it is important to consider the following factors: â?¢ The pressure and temperature rating of the piping system â?¢ The type of material that the flange is made from â?¢ The size of the flange â?¢ The type of connection that the flange will be used with CS Forged flanges are a critical component of many piping systems. They provide a strong and reliable connection between pipes, valves, and other equipment. Additional Information â?¢ Forged flanges are typically made from carbon steel, stainless steel, or alloy steel. â?¢ Forged flanges are available in a variety of sizes, from NPS 1/2 to NPS 24. â?¢ Forged flanges are available in a variety of pressure ratings, from PN 2.5 to PN 400. â?¢ Forged flanges are available in a variety of connection types, including slip-on, socket weld, lap joint, threaded, and blind flanges.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings. According to the application: 1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc. 2. changing the direction of the pipe: bends, bends. 3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe. 4. pipe fittings with additional piping branches: three links, four links. 5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug. 6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc. According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings. Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
STEEL BILLETS 3SP AND 5SP ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT Steel billets of various dimensions available. These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Product Description : Scrap Steel Price of product ( USD price or FOB price) : Please inquire within for current market prices. Product origin : Worldwide. Origin will be determined at time of inquiry. Key Specifications/Special Features : HMS Type 1 and 2 Minimum Order Size and Packaging details : Inquire within for MOQ and packaging details.
We are supplier of Steel Channels. Steel U channel, the size can be provided according to customer's requirement. 1)size: 51x25x3mm-305x80x13mm 2)material: q195, q215, q235, a36, ss400, ss540 3)packing:bundle with strips.
We are supplier and exporter of Steel Slab.
