Xgz Cast Stone Scraper Chain Conveyor Suppliers and Manufacturers

Sprocket wheel is an important component of sprocket assembly. Sprocket assembly is composed of sprocket wheel, sprocket shaft, bearing, bearing housing, sealing ring, etc. Sprocket material is made of 42CrMo, and its mechanical and other aspects of performance are better than other materials. Sprocket wheel of sprocket assembly is mainly produced by forging and quenching process to improve sprocket wear resistance, of course, there are other processing equipment finishing. The processing requirements of sprocket assembly sprocket wheel shall first ensure that the surface of sprocket wheel forgings of sprocket assembly is free from cracks, interlayers, folds, forgings, slag inclusion, crust and other defects, and check to ensure that there is no crack in the middle of the sprocket body. Secondly, the tempering hardness of the sprocket wheel of the sprocket assembly reaches HRC250-280, and the tooth surface is quenched. The quenching hardness of the tooth surface of the sprocket is HRC50-55, and the hardening layer depth is 10mm, so as to improve its wear resistance and extend the service life of the sprocket assembly. Through to the sprocket chain wheel body component processing, can also see that double of henan for scraping machine sprocket components such as all kinds of machine parts production strictly, made of high quality products, customer satisfaction products, has been a double the execution of the standard, we use good products, in exchange for your trust, if you need a scraper conveyor sprocket, welcome to contact us, double of henan look forward to cooperation with you!

Scraper conveyor sprocket component and the sprocket wheel of the everyday is the same, is through the chain to realize power transmission and run, through its name can be seen that it is in the coal mine fully mechanized working face of scraper conveyor equipment accessories, located in the head, tail, so there are according to different location is called the nose wheel component, the tail sprocket components. So the sprocket assembly of the scraper conveyor can only be used on the scraper conveyor? Isn't. Scraper conveyor and reproduced machine structure is known to all, similar to that of the nose and tail sprocket components for scraper conveyor sprocket component size is the same, the nose sprocket components than the tail sprocket and reproduced machine components, but for the sprocket used component structure are the same, so the scraper conveyor sprocket components can be used in reprint machines is scraper conveyor on the nose of the tail with chain wheel component, the nose chain wheel component and the tail sprocket and reproduced machine components used two sprockets types are different, so most of the time just call, But the scraper conveyer and the transporter sometimes use the same sprocket assembly. Whether it is scraper conveyor sprocket assembly, or transfer machine sprocket assembly, as long as there is sprocket assembly figure number can be accurately implemented sprocket assembly, its name labeling does not have a great impact, so sometimes we do not too complicated name. Henan Shuangzhi Machinery as a scraper parts manufacturer, scraper conveyor sprocket assembly model and specifications are relatively complete, can help you implement the product for processing and production, let you find the right person, give you the right product, we have been working hard, welcome you to consult and cooperation.

The coupling of the scraper is also called plum flower elastic coupling, which is an important part of the transmission of power on the scraper conveyor. The scraper coupling is shaped like plum at one end, a disk with holes in the middle and a hollow cylinder at the other end. In general, a scraper conveyor needs to be equipped with two couplings, one is installed on the motor, one is installed on the scraper reducer, two parts of the coupling plum relative to each other, coupled with the coordination of the elastic disk, to complete the power output from the motor to the reducer. The use of the coupling directly affects the connected parts at both ends, the quality is excellent, the installed coupling can reduce the operating noise of the parts at both ends, so that the operation is more stable, efficient and the service cycle is longer. So in the purchase of scraper coupling, to choose the best quality products, choose the appropriate manufacturers. Henan Shuangzhi Machinery produces various types of couplings, the models are 110S2402-01, 102S21-01, 123SMB13-02, 105SD01-01, 8Z001-46/2, 89S26-02, 111S09-01, etc., more product drawing Numbers, contact us for more verification.

72/06LL sprocket assembly is one of the main parts of the transmission department of SZZ764/200 transfer machine. The sprocket assembly of the head is similar to the structure of the tail, which can be assembled and disassembled as a whole. The sprocket assembly is driven by the scraper chain. The sprocket assembly can be turned for a period of time to allow even wear on both sides of the sprocket teeth. Szz764/200 transfer machine head and tail sprocket is the same size, mainly by end cover, sprocket shaft, sprocket, floating seal, bearing and so on. The sprocket is forged as a whole with 7 teeth, the tooth shape is machined and the tooth surface is quenched. The inner holes at both ends are involute splines, and the power is transferred to the sprocket through the output shaft of the reducer, so that the sprocket drives the scraper to run. The sprocket can be disassembled as a whole without disassembling the transmission device for easy maintenance. Henan Shuangzhi can be customized new and restored sprocket components, if you need more information, welcome to visit the factory.

The scraper produced by Henan Shuangzhi is mostly made of materials of 27SiMn, 40Cr and 40Mn2. After forging, the strength, hardness and toughness of the above three materials are all improved, and the abrasion resistance and bending resistance are also greatly improved. The specific processing technology of scraper is as follows: blanking â?? heating â?? forging blank â?? punching â?? removing burr â?? tempering â?? shot blasting â?? surface treatment â?? quality inspection. Forging process is the key of processing technology. After the blank is heated in the reheating furnace, the blank is made by forging hammer. During the forging process, the oxide skin on the blank surface is knocked off, and the depth and hardness of the hardening layer of the scraper blank are more guaranteed. Henan Shuangzhi supplies the following types of scraper: 101S-01 scraper, 150S0117-1 scraper, 5GL02-2A scraper, 1GL3-1 scraper, 43GL03-1 scraper, 77GL3-1 scraper, 3S001-00/14 scraper, 8GL04-1 scraper, etc. More scraper models can contact us for verification, provide drawings can also provide customized services. Scraper is only a small part of our business, Henan Shuangzhi machinery mainly produces and manufactures all kinds of coal parts forgings, scraper parts, transfer machine parts, hydraulic bracket parts, etc., Henan Shuangzhi all involved. If you need coal parts forgings, you are welcome to contact us. All staff of Henan Shuangzhi will serve you wholeheartedly.

Scraper conveyer is one of the main equipment for conveying coal in fully mechanized coal mining face, and the central trough of scraper conveyer is the fuselage component and material bearing mechanism of scraper machine, so the central trough of scraper machine also has an important effect on scraper machine. We all know that the scraper conveyor is mainly composed of the nose, tail and fuselage. The main body of the scraper conveyor is the central trough. The performance of the scraper 105S07 central trough directly affects the service life of the scraper conveyor. The central trough of 105S07 bears the severe friction of coal, scraper and chain in the process of coal conveying. The middle trough of the scraper conveyer 105S07 is also the fulcrum of the hydraulic support moving in the fully mechanized coal face. Due to long time wear and tear, consumption is large, so scraper conveyor central trough is also the daily purchase of coal mine more scraper accessories. Because the scraper conveyor has different types, such as light, heavy, super heavy points, so for the scraper conveyor trough structure requirements are also different, so that the scraper conveyor trough category is also divided into several, such as welding central trough, casting welding central trough and integral casting central trough; Open bottom middle slot and back bottom middle slot; Middle canal of single bedded ear and middle canal of double bedded ear, etc. Although scraper conveyor 105S07 central trough structure is relatively simple, but it does not mean that it is not important in the scraper accessories, no matter the weight, no matter the size, scraper accessories have their own role and significance. So Henan Shuangzhi machinery has been all the same, no matter what scraper accessories pay attention to product quality, start from small details, so as to make the overall scraper conveyor normal operation.

HSSG SCRAPER CONVEYOR Flour Milling Machinery SCRAPER CONVEYOR HSSG SCRAPER CONVEYOR The HSSG series scraper conveyors are widely used in the conveying of grainy and powdery stuff in cereal and oil, feed- stuff, and chemistry and so on. The conveyors can convey horizontally or aslant below 15°. Cover made of high grade carbon steel. Chain made of high grade alloy Steel. Scraper made of nylon. Bottom plate made with wear-resisting manganese steel. With reducer. With anti-block system to protect working safety. Model HSSG 16 HSSG 20 HSSG 25 HSSG 32 HSSG 40 HSSG 50 Wheat capacity (t/h) 12-30 30-50 50-100 100-130 180-240 250-320 Power (kw) According to the length Pitch (mm) 100 125 125 125 160 200 Maximum conveying distance (m) 50 50 60 60 80 80

Manufacturers of Conveyor Chain to International Standards, British Standards and industry standards. Chains also manufactured to customer specifications. Shipped Worldwide.

820-k325;820-k250;820-k350;820-k400;820-k450;820-k600;820-50k7 26pcs/m. Or 80pcs/

Conveyor chains having various breaking load depending on the application of the chain in different temperatures. Wooden case

1)standardized precision roller chains from 16÷pitch to 3.5÷ pitch bsa/asa std. 2)designed special purpose conveyor chain from 1÷pitch to 24÷ pitch. 3)standardized or designed conveyor chain for material handling from 1÷ pitch to 24÷ pitch. 4)slat band chains (bottle conveyor chains) m.S./s.S. 5)extended pin/pitch chains. 6)standardized or designed: -sprockets, gears, gearboxes, worms, wormwheels & pinion

Chain conveyors

Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag  / 72bags/pallet / 20pallets/20GP  /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.�  2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.

china coal0001 .MSR Type Buried Scraper Conveyor Conveyor, Scraper Conveyor, Buried Scraper Conveyor Introduction of MSR Type Buried Scraper Conveyor SR type buried scraper conveyor for conveying granular materials: Such as: Calcined dolomite ferrosilicon particle, semi coke, etc... Buried scraper conveyor is a closed rectangular cross-section of the shell, continuous conveying equipment by means of moving the scraper chain conveyer dust, small particles and patches and other bulk materials. Because in the transportation of materials, a scraper chain is all buried in the material, it is known as the buried scraper conveyor. Scraper conveyer has the advantages of simple structure, light weight, small volume, good sealing and convenient repair. It can transport can also tilt or vertical transmission, not only can the single delivery, and serial transportation; Multipoint feeding, multiple points discharging, flexible process layout, as the shell is closed, can significantly improve the working conditions in the transportation of materials, preventing the pollution of the environment. Parameters of MSR Type Buried Scraper Conveyor modelMSR32MSR40 Machine groove width (mm)B=320B=400 Machine groove height (mm)h=320h=360 Chain speed (m/s)0.16,0.2,0.25,0.320.16,0.2,0.25,0.32 Conveying capacity (m/h)8-1615-30

The middle trough of the scraper conveyor is one of the key parts of the scraper conveyor, and it is the fuselage of the scraper conveyor. Only the volume and quality of the scraper conveyor occupies about 70% of the scraper conveyor machine. Scraper parts manufacturer Henan shuangzhi below for you to introduce the scraper middle trough. As an important spare part of the scraper conveyor, the middle trough of the scraper is not only the bearing mechanism of the material and the scraper chain, but also the important fulcrum of the hydraulic support. Each scraper is generally equipped with more than 100 middle slots, the length of the middle slot is mainly 1.5m and 1.75m two types. Therefore, the service life of the scraper and the transport volume are largely determined by the service life of the middle slot. The middle slot is mainly made of the groove side and the middle plate. The material is mainly 16Mn and ZG30SiMn2 of high manganese steel. According to the different manufacturing technology of the middle slot, the middle slot can be divided into welding middle slot, casting middle slot and integral casting middle slot. According to the different structure of the central trough, the central trough can be divided into the open bottom middle trough and the back end middle trough. The middle groove can be divided into the middle groove of the single and the middle groove of the double. The central trough of the scraper is in direct contact with the material, coal gangue and scraper chain, which is easy to be affected by it and will cause scraping and wear for a long time. The middle plate, bottom plate and groove top of the middle slot are the most prone to wear. The main wear forms are abrasive wear, fatigue wear, adhesive wear and corrosion wear. Henan Shuangzhi, as a highly praised scraper conveyor accessories manufacturer in the industry, improves the abrasion resistance of the central slot of the scraper by adopting wear-resistant materials and optimizing the surface strengthening technology of the central slot. About more coal machine accessories product information, please continue to pay attention. If you need coal machine parts, you are welcome to telephone consultation, shuangzhi service for you anytime and anywhere.

Sprocket components and scraper chain as the important transmission configuration of scraper conveyor, if there is a fault, it may affect the normal operation of underground coal mining work. So how do you deal with such situations? The sprocket components sometimes has the phenomenon of high temperature in the operation process, the cause may be the insufficient lubricating oil, or the damage of bearing and sprocket may cause the aggravation of friction, which makes the temperature rise. Then the solution is to oil the sprocket assembly, so that the amount of oil to the specified requirements, or replace the worn bearing, sprocket body to make a new replacement. The scraper chain has the condition of jumping teeth at the sprocket assembly, which is caused by many factors, such as too loose scraper chain, twisted chain segment, unequal length or elongation of double-strand chain or different number of rings, as well as the influence of excessive scraper deformation. The correct treatment method is to adjust it: re-tensioning the scraper chain, re-install the twisted chain segment correctly, check the scraper chain length and elongation if unqualified, it should be adjusted and replaced, and must use the odd ring chain, and is to replace the seriously deformed scraper. Inspect the daily maintenance of sprocket assembly and chain of scraper conveyer according to different conditions, deal with and solve the faults in time, reduce the influence of associated problems. Henan Shuangzhi production scraper transfer machine parts, crusher and reducer parts, etc. Welcome new and old customers to visit the factory.