Main Parameters Dimension Overall Length(mm): 7640 Overall Width(mm) : 2300 Overall Height(mm) : 3250 Wheel Base(mm): 3800 Wheel Track Front/Rear(mm): 1860/1612 Front/Rear overhang(mm): 1390/2450 Luggage Space(m.m.m): í¦3 Performance Grade Ability(%): í¦20 Min. Turning Diameter(m): í_18 Max. Speed(km/h): í¦110 Fuel Consumption(L/100km): 16 Max. Stoppping Distance(m): ú+10ú¿Full Loading 30km/hú¬ Approach/Departure Angle(degree): 20/11 Mass Complete Bus Mass(kg): 5380 Max. Loading Mass(kg): 4890 Seat Type: 2+2 Passenger+Driver: 26+1 Chassis Model: EQ6710KSP3 Type: Front-mounted Steering: Unitary Power Steering Clutch: Single, Dry Transmission: Five Speed Suspension System: More Spring Brake System: Dual-circuit Pneumatic Brake Tyre: 7.50R16 Engine(optional) Model: EQ6102DT-20 Type: In-line, 6-Cylinder, Direct Inject, Water-Cooling, Turbocharged, Inter-Cooling Rated Power(kw/ps): 103/140 Max. Torque(N.m/rpm): 405/1500-1700 Exhaust: 5638 Exhaust Standard: Euro 2 Naked
Main Parameters Dimension Overall Length(mm): 8980 Overall Width(mm) : 2460 Overall Height(mm) : 3455 Wheel Base(mm): 4500 Wheel Track Front/Rear(mm): 1900/1800 Front/Rear overhang(mm): 1890/2590 Luggage Space(m.m.m): í¦5 Performance Grade Ability(%): í¦20 Min. Turning Diameter(m): í_18 Max. Speed(km/h): í¦115 Fuel Consumption(L/100km): 20 Max. Stoppping Distance(m): ú+10ú¿Full Loading 30km/hú¬ Approach/Departure Angle(degree): 10/8 Mass Complete Bus Mass(kg): 8800 Max. Loading Mass(kg): 12000 Seat Type: 2+2 Passenger+Guide+Driver: 24-37+1+1 Chassis Model: YJ6930 Type: Rear-mounted Steering: Unitary Power Steering Clutch: Single, Dry Transmission: Five Speed Suspension System: More Spring Brake System: Dual-circuit Pneumatic Brake Tyre: 9.00R20 Retarder: Optional Engine(optional) Model: YC6J210-20 Type: Water-cooling,In-line, 6-cylinder,Turbocharged, Inter-cooling Rated Power(kw/ps): 155/210 Max. Torque(N.m/rpm): 710/1400-1600 Exhaust Standard: Euro 2
Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 Machine dimensions:3000 x 2000 x 4650 Total weight:7000kg
Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 3000 x 2000 x 4650
Max speed:90km/h Engine:weichai wd12.375(375hp) Max torque(n.M)/rm:1500/1300-1600 Displacement(l):11.596 Emission: euro-2 Transmission: rtd11509c 9 forwad and 1 reverse, manual control Clutch: spring plate, disphram spring, ¦µ30 Brake: drum type Park brake: power spring brake acting on rear axle Service brake: with dual circuit compressed air brake Auxiliary brake: evb Steering: type 8098 with intergal circuiting ball power steering Chassis: ladder structure with parallel straight Front suspension: longitudinal leaf spring Rear suspension: inverted leaf spring stabilizator suspension Front axle: man technology 7.5 tons Rear axle: styre technology 13 tons Tyre: 12.00-20/12.00r22.5/12.00r20 Fuel tank(l);380 Starter:5.58kw, 24v Generator: 1.54kw(28v 55a) Battery;2x135ah Cab: man f2000 length flat head, two seats and one sleeper Effective volume (m3): 8 Mixing volume (m3): 8 Surplus rate (%): 1 Rational speed of mixing drum (r/min): 0-16 Model of decelerator: zf Volume of water tank (l): 440/250 Other option: air conditioning, enlargement radiator Drive type: 6x4 Complete kerb mass(kg):13430 Gvw(kg):32500 Max length(mm):9130 Max width(mm):2490 Max height(mm):3900 Wheel base(mm):3800+1350 Front/rear overhang(mm):1525/2630 Track width(mm):2036/1850 Min ground clearance(mm):314 Min turning circle(m):18 Max gradeability(%):32
**Portable Dual Component Airless Paint Spraying Equipment HK-PDP-2000 **Features [Part No. HK-PDP-2000] : Easily portable dual liquid equipment, High-quality coating due to the applied paint hearing machine(A main material and a hardener), Shortened drying time, Paint for heating is available, Adjustable depending on the dilution ratio of a main material and a hardener, 1:1 to 2:1 when applied displacement pumps are the same size **Technical Data [Part No. HK-PDP-2000] - Pressure Ratio : 74:1, Ratio Range : 1.2:1~2.4:1, Max.Delivery : 13.2L/min., Max.Cycle : 50cpm, Output per Cycle : 265cc, Operating Air Pressure : 7kgf/cm², Max. Discharge Pressure : 518kgf/cm², Dimension[LxWxH] : 140x90x165cm, Weight : 440kg, Noise : 80dB, Air Motor effective Diameter[Main] : 321mm, Air Motor Effective Diameter(Feeding) : 203mm, Air Motor Stroke : 120mm
**Portable Dual Component Airless Paint Spraying Equipment HK-PDP-2000 **Features [Part No. HK-PDP-2000] - Easily portable dual liquid equipment - High-quality coating due to the applied paint hearing machine(A main material and a hardener) - Shortened drying time, Paint for heating is available - Adjustable depending on the dilution ratio of a main material and a hardener - 1:1 to 2:1 when applied displacement pumps are the same size **Technical Data [Part No. HK-PDP-2000] - Pressure Ratio : 74:1 - Ratio Range : 1.2:1~2.4:1 - Max.Delivery : 13.2L/min. - Max.Cycle : 50cpm - Output per Cycle : 265cc - Operating Air Pressure : 7kgf/cm - Max. Discharge Pressure : 518kgf/cm - Dimension[LxWxH] : 140x90x165cm - Weight : 440kg - Noise : 80dB - Air Motor effective Diameter[Main] : 321mm - Air Motor Effective Diameter(Feeding) : 203mm - Air Motor Stroke : 120mm
1)Engine type: 250cc air-cooled dual-cylinder four-stroke 2) Bore and stroke: 53mm x 53mm 3) Compression ratio: 9.2:1 4) Max. power output: 12.5KW/8000r/min 5) Ignition: CDI 6) Starter: electric 7) Transmission: manual clutch, 5 speed with reverse 8) Driveline: chain drive 9) Suspension: Independent dual A arms 10) Front brakes: Drum 11) Rear brake: Disc 12) Front tires: 25 x 10 - 12 13) Rear tires: 24 x 11 - 10 14) Product dimensions: 2030(L) x 1180(W) x 1170(H) 15) Wheelbase: 1260mm 16) Seat height: 850mm 17) Dry weight: 280kg 18) Fuel capacity: 15L 19) Options: racks, mirrors, head light, turn signal, speedometer, horn 20) Available colors: red, blue, yellow, green, black, etc. 21) 6 months' warranty: coverage of defects in materials and workmanship
Features: 1.Max. Energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina Fiber ceramic insulation. 2.Heavy duty double layer structure with cooling fan. Lower temperature in outside case. 3.Pid automatic control via current limiting phase angle fired the resistor, e.G scr(silicon controlled rectifier) 4. Power control with 30 or 50 segments programmable. Descriptions ProductTouch screen atmosphere muffle furnace Chamber size300x300x500mm (wxhxd) Max. Temperature1200°c Working temp.=1100°c (continuous) Heating rate0-15°c/min (suggestion: 0-10°c/min) Temp. Control30 or 50 steps programmable and pid automatic control ThermocoupleK type Temp. Accuracy+/-1°c Heating elementFe-cr-al-mo resistance wire Furnace structureDouble layer steel casing with dual cooling fan Working voltageAc 208-380v, single phase, 50/60 hz. (or according to your requirement.) Payment termT/t in advance Delivery timeIn 15 days after receiving the payment. ShipmentBy air, sea, etc. Packing detailsPacking - plastic paper inside, polyfoam filledwooden case outside
Introduction Irm300 is one of the general ndir co2 gas modules, which adopting ndir principle, consists of carefully designed light chamber, precise electric circuit and intelligent software. With the help of single light source, dual channel detector, and Unit Storage temperature Tstg -20 to 80 ¡ãc Working temperature Ta 0 to +50 ¡ãc Working humidity Ha 0 to 90 % rh Working pressure Pa 0.8 to 1.2 Atm Electric characteristics Description Symbol Min. Typical Max. Unit Supply power Vs 4.6 5 5.4 V Maximum current Imax 130 160- Ma Light current Iavg 60 70 Ma Frequency F 0.2 1 2 Hz Preheat time Twarm 90 120 180 Sec Performance characteristics Description Min Typical Max Unit Detection range 0 2000 50000 Ppm Detection accuracy - ¡¨¤60ppm¡¨¤5% fs - Ppm T90 Diffusing - 60 90 Sec Pumping - 10 20 Sec Repeatability Zero
Main parameters: Voltage: 220V Power: 1.5KW Spindle speed:1400r/min Max. cutting blade size:12inch(300mm) Dimension: 600*550*850mm Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
Main parameters: Voltage: 220V Power: 1.5KW Spindle speed:1400r/min Max. cutting blade size:12inch(300mm) Dimension: 600*550*850mm Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
Voltage: 220V Power: 1.5KW Spindle speed:1400r/min Max. cutting blade size:12inch(300mm) Dimension: 600*550*850mm Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
Js1000 concrete mixer is dual horizontal shaft concrete mixer, which can can work independently, also can be composed the concrete batching plant with pl1200 and other matched equipment., and it can be applicable to large, medium and small precast concrete products factory and roads, railways, bridges, water conservancy, civil construction project, and it can mix dry and hard concrete, plastic concrete, light aggregate concrete and all kind of mortar, it is one kind of high efficiency, widely used construction machinery. It owns reasonable design , and its mechanical Delivery capacity 1000l Charging capacity 1600l Productivity 50-60m3/h Max aggregate size 60/80mm Mixing motor power 37kw Lifting motor power 11kw Lifting motor speed 21.9m/min Overall dimension(l*w*h) 4640*2250*3385
Js1000 concrete mixer is dual horizontal shaft concrete mixer, which can can work independently, also can be composed the concrete batching plant with pl1200 and other matched equipment., and it can be applicable to large, medium and small precast concrete products factory and roads, railways, bridges, water conservancy, civil construction project, and it can mix dry and hard concrete, plastic concrete, light aggregate concrete and all kind of mortar, it is one kind of high efficiency, widely used construction machinery. It owns reasonable design , and its mechanical Charging capacity 1600l Productivity 50-60m3/h Max aggregate size 60/80mm Mixing motor power 37kw Lifting motor power 11kw Lifting motor speed 21.9m/min Overall dimension(l*w*h) 4640*2250*3385
The SC/SCD series construction hoists that we produced are driven by gear and rack. By using advanced technology both at home and abroad, combing theory with practice and improving and innovating continually, it has a reasonable structure, simple operation, and beautiful appearance consequently. Its type includes three-driven, dual-driven, interior mounting and exterior mounting. And this product has no counterpoise, dismantling easily and working safely. The specifications are as follows, Rated loading capacity+¬2000*2 Kg Hoisting speed+¬33 m/min Max lifting height+¬150 m Rated passenger capacity+¬ 24*2 person Inner dimension of cage+¬ 3*1.3*2.2 m standard size of mast section+¬650*650*1508 mm Model of fall arrestor+¬SAJ3.0*1.2 / SAJ4.0*1.2 Working voltage+¬ 380f+50HZ V Power of motors+¬11*3/11*2 Kw
Ski pole Model no. Ls-d15g Material of staff aluminum alloy 6061, 7075.You can make a selection for yourself. Sections 1 sections Grips dual density grips, made of rubber anti-slip materials and comfortable. Wrist strips capable of release or retracting, material: nylon Damping device all springs between any tow dolly bars can achieve excellent damping effects. Tip carbide tip with rubber protection Diameter of staff 16mm Adjustable length max length 1350mm, min length 850mm Printing you can make a selection for yourself. Packing each one with a plastic bag.50 pcs in one carton Carton measure 760mm*330mm*220mm
S&a recirculating chiller cw-6100at for raycus 500w laser S&a cw-6100at dual temperature and dual pump series is high-precision compression refrigeration water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system. It is fit for cooling raycus 500w laser. S&a cw-6100at is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. S&a water chiller cw-6100at features 1. 4200w cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; ce approval; rohs\reach approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Cw-6100at parameter: Voltage: 220v; frequency: 50/60hz; refrigerant: r-22 / r-410a Pump power: 0.1kw+0.55kw; tank capacity:4l+12l Max. Lift:25m+36m; max. Flow: 16l/min+70l/min N.W: 90kgs; g.W: 100kgs; Dimension : 78 x 47 x 89 cm (l x w x h); packing dimension: 87 x 60 x 109 cm(l x w x h) About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist onâ?�quality firstâ?� in design and production. Â??s&aâ?� and â??teyuâ?� have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60%. -
This is the special rotary cutting machine for PDM drill and bent housing. Work piece will be supported by dual chucks. Machine working is controlled by numerical control system, compaired with conventional machining, it can save raw material, improve the working efficiency. We can make and supply kinds of PDM drill parts such as: bent housing, bypass valve body, joint etc as per drawing offered by customers. ItemsUnitHYSK-246 Spindle bore diametermm255 Max. machining lengthmm1400 Z-axis Max. travelmm1500 X-axis Max. travelmm100 Spindle speed steps级Stepless Spindle speed r/min 20-350 Range of machining diametermm 250 Z-axis feed speedmm/min0 1200 X-axis feed seed mm/min0ï½?1200 Setting accuracy of positionmm0.001 Headstock servo motor power (Z)kW1.3 Headstock servo motor power (X)kW1.3 Tailstock gear motor power (Z)kW1.5 Hydraulic station motor powerkW1.5 Main motor power kW7.5 Machine weightã??6500 Machine dimensionï¼?LÃ?WÃ?Hï¼?mm3800*2200*1900
Applications: Various kinds of objects with regular shape like biscuits, instant noodles, towels, bread, cakes, pies, candy, ice-cream, medicine, commodity, hardware, detergent, industrial components etc. Descriptions: 1. Dual frequency conversion control, bag length can be set and cut on one step, saving time and film. 2. Interface features easy and quick setting and operation. 3. Self failure diagnosis, clear failure display. 4. High sensitivity photoelectric eye color tracing, numerical input of cutting sealing position for extra accuracy. Specifications: Type BT-250B Film Width Max.250mm Bag length 65-280mm Bag width 30-110mm Product height Max.40mm Film roll diameter Max.320mm Packing speed 40-230 bags/min Power 220V,50/60HZ,2.4KW Machine size (L)3770(W)670(H)1450 Machine weight 800Kg