Fiberglass tanks are actually fiberglass reinforced plastic (FRP) provides the strength to work at full capacity . Also safe for store chemicals with sunlight proof and corrosion resistant outer coating and protective inner coating which is chosen according to chemical will be stored in.
Multi-purpose Liquid Storage: Drinking-Water Storage | Non-drinking Water Storage | Chemical Storage | Fuel/Oil Storage. Where to Use Bladder Tanks: Oil Fields | Mining Locations | Military Operations | Residential Areas | Industrial Facilities Construction Sites | Rural Areas | Schools | Hydraulic Fracturing Locations | Areas hit by Natural Disasters. Why Bladder Tanks: Transportation Savings (ship empty to your location) | Folds up or Rolls when Empty Compatible with a Wide Range of Liquids | -40-90 degree working temperature | Quick Installation No plastic taste into the water | No Glue or Residue | Microbial Resistant | Puncture & Abrasion Resistant
Design Pressure : 2.3MPa Volume capacity : 4.9~50 Ton Diameter : 1500~2400mm Height : 2150~3175mm Material : A516-70 Standard/Certificate : KS Q ISO 9001:2009/ ISO 9001:2008 Registered a patent of Cryogenic storage tanks Hold the right to the patent. ASME ¡°U¡±&¡±S¡±STAMP
Design Pressure : 2.3MPa Volume capacity : 4.9~50 Ton Diameter : 1500~2250 mm Height : 4490~14761mm Material : A51670[internal] / SS400[outer] - Standard/Certificate : ASME U¡±&¡±S¡±STAMP, KS Q ISO 9001:2009/ ISO 9001:2008, Registered a patent of Cryogenic storage Tanks. Hold the right to the patent. Registered a patent of practical new designs for vacuum valve devices of vacuum tanks.
Design Pressure : 1~3.2MPa Volume capacity : 4.8~50§© Diameter : 1250~2400mm Height : 5428~12808mm Material : A240-304, SUS304 [internal] / SS400 [outer] - Standard/Certificate : ASME ¡°U¡±&¡±S¡±STAMP, KS Q ISO 9001:2009/ ISO 9001:2008, Registered a patent of Cryogenic storage tanks, Hold the right to the patent, Registered a patent of practical new designs for vacuum valve devices of vacuum tanks.
The horizontal distilled water tank series trictly tally with the 31st and 32nd clauses of 'medicine production quality management normal gmp general principles' and is designed, manufactured and accepted according to the requirements of gb150-98'steel pressure vessel' and jb/t4735-97 'steel welding normal vessel' . 1. Heat preservation material of the vessel adopts high-temperature resistant and antiaging polyurethane blister or pearl cotton. 2. Joints adopt international general iso package chuck, inner container adopts imported stainless steel sus316l or sus304, internal surface is polished to ra 28 m, and external surface polishing, mirror polish, sand blasting or cold-rolled nature-color surface polishing. All is in accordance with cgmp medical standards. 3. Orifice is set with level gauge (static-pressure type, capacitance type, non-contact type, ultra-sonic type and glass tube type), air respirator, thermometer (digital display type or dial plate type), cip cleaning mouth, sip sterilizing mouth, liquid entrance-exit gate and sanitary inlet. 4. Volume specification: 100l-30000l or to be designed and manufac-tured at customers' actual request. 5. Relevant gmp testing data are attached in the machine.(including ma-terial report, external com-ponents certificate of quality and verification form). Soft cloth & plywoodcese
We have a wide range of SS Storage Tanks and Pressure Vessels to suit industrial requirements, various sizes and designs to suit specific customer needs. Many of the products are available in ready stock for instant delivery commitments or can be delivered on short notice. We have a wide range of SS Storage Tanks and Pressure Vessels to suit industrial requirements, various sizes and designs to suit specific customer needs. Many of the products are available in ready stock for instant delivery commitments or can be delivered on short notice.
Water storage tank Storage tank for fire-fighting, domestic water consumption or for industrial used. Tank dimension: width x length x height Panels pack in pallet. Per panel can be 4ft x 4ft (1.2m x1.2m) or 1m x 1m
We design and manufacture Solvent Storage Tank which is used to store solvent
Insulated milk storage tank
Water storage tank offer with premium quality and low cost. Our tanks are certified at ISI parameter and free from bacteria and fungus.
Condition: new Capacity: 5~200 m3, 5-200m3 Place of origin: zhejiang, china (mainland) Brand name: cyy energy Model number: cyyst Dimension(l*w*h): customerized Weight: 2-30t Certification: asme/tped/dot/gb Warranty: 5 years After-sales service provided: engineers available to service machinery overseas working pressure: 1~40bar Medium: lox/lin/lar/lng/lpg
Water Storage Water is one of the most essential necessities in our life. Yet most of Indian households do not have access to drinking water in their homes. Tecza Pipes has now brought its more than 10 years legacy in manufacturing high quality PVC piping systems to develop Tecza Water Tanks. The best quality, trust and high value of Tecza Pipes, now in Water Tanks.
Oxygen Storage tanks Fabrications Oxygen Storage tanks are stationary, vacuum-insulated pressure vessels that consist of an inner and an outer pressure vessel. The inner vessel is designed for the storage of low-temperature, liquefied oxygen. The space between the inner and outer vessel is evacuated up to a pressure of below 50 microns. Oxygen Storage Tanks are offered in different sizes and capacities. Our range of Liquefied oxygen nitrogen gas storage tank is demanded by chemical and pharmaceutical industries. Our company offer are engineered for maximum flexibility and minimum cost. Being technologically advanced, the tank is time and resource saving options. for more details please contact
In In-direct heating type tanks-cylindrical in shape& horizontal in position, the bitumen is heated by circulating hot thermic oil through its heating coil. A thermic oil heater with oil fired burner heats the thermic oil & this hot oil is circulated through the heating coil inside the bitumen tank by an oil pump on heater. A single heater can easily heat nos. of tanks as required in continuous process. The temperature of oil is very well controlled by an auto thermostat on heater and so, bitumen never gets over-heated. Thus, the quality of bitumen (viscosity) never gets deteriorated/spoiled in this kind of indirect heating system. Fuel consumed to heat every ton of bitumen is also less compared that for a direct heating system.
Design Code: ASMEVIII-I Design Pressure: Up to 35 Mpa Material Code: From ASME & ASTM Diameter Range: Up to 4 Meter Length Range: Up to 50 Meter Available Material:CS, SS, Alloy, High Alloy Major Markets: Refinery, Petrochemical, Chemical, Offshore, Pharmaceutical, Marine industries As Per Exporting Package For Customers
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality. The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³, Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market. Stainless Steel Bolted Frac Sand Storage Tanks Specifications Coating color dark blue, dark green, white, and customized A standard steel plate size effective size 2400mm x 1200 m Steel plates thickness 3mm - 12mm, depends on the diameter & height Coating thickness 0.25mm - 0.4mm, two coatings internal and external Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 Adhesion 3,450N/cm Elastic same as steel sheet, around 500KN/mm Hardness 6.0 Mohs Service life >30 years Spark test >1500 V Permeability gas and liquid impermeable Easy yo clean smooth, glossy, inert, anti-adhesion Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
As the most popular solution for chemical wastewater Treatment, Glass Fused to Steel (GFS) Tanks are widely used as industrial water storage tank,potable water storage, fire-fighting water treatment ,irrigation water storage etc. With enamel coating technology, GFS tanks has excellent corrosion resistance, no need to do any anticorrosive treatment, and also of superior aid and alkali resistance. Advantage of GFS Industrial Water Storage Tanks 1. Short installation period : compare to more than 40days installation time for other type tanks, usually GLS tanks only needs even less than 15days. 2. Superior corrosion resistance : GLS tanks can resist pH rage 1-14. 3. Beautiful appearance : Standard color is dark green, and color can be customized according to customers request. 4. Climate adaptability : GLS tanks can be used in almost all kinds of weather conditions, that is very important for some special areas. 5. Long service life : more than 30 years service life. 6. Easy construction : No requirement for big installation equipment, and can be easily expand, dismantle and move. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
