Road Machinery Suppliers and Manufacturers

Span by Span Launching Gantry is used for cross-sea, cross-river bridge, high-way and rail bridge projects

According to the engineering and construction experience, it is recommended that the conditions of use for marking for different roads, different regions, the choice of the traffic painting type and painting materials. applied. Solvent-based marking paint. It is a traditional type road marking paint, and it has the advantages of low cost, fast construction, easy to operate, adaptable, commonly used in urban road markings and less demanding provincial highway. Hot melt spray coating material. It is based on the thermoplastic hard resin-based material preparation, the powder room temperature. Construction of special equipment (thermal reactor) the coating is heated to 180 degrees Celsius to 220 degrees Celsius, the formation of a flowing liquid, coating the road to form a hard film. Hot melt marking paint contains reflective glass beads, reflective well. Hot melt spray-type marking film thin (8mm-2mn), construction speed, spray marking table uniform, neat edge, concept of linear Off. Anti-pollution performance is better than ordinary hot melt coating. By changing the coating material applied to the road of the city towel, and anti-pollution facilities after marking performance is greatly improved compared directly and room temperature coatings. Cracks are smaller than scratch-painting. Hot melt spray road marking paint used in the construction of low-pressure gas, centrifugal coating, marking after the film has no internal stress, at the same time marking the coating is thin, subjected to temperature changes caused by the shrinkage stress is relatively small. Higher value of anti-slip. Hot melt spray road marking is a uniform coating on the pavement, the marking surface after the completion of the original road, thus marking slip resistance. Henan dayu road marking machine Co., Ltd. was founded in 1992, is a leading professional traffic lanes coating facilitie manufacturer in China. Road machinery production base covers an area of 1.7 million square meters, with a construction area of nearly 100,000 square meters. Henan Dayu Road Marking Machinery Company, is internationally renowned lanes painting machines supplier, represented by special road lane construction machinery, highway road marking paint,and dedicated electronic traffic safety facilities,including thermoplastic spraying machines, cold solvent road marking machine, air-auxiliary lane coating equipment, two component road marking machines, auxiliary road marking equipment and kinds of traffic lines coating materials, respective for machine types. 20 kg

For developed countries, the excellent road conditions, topography and road width are suitable for marking car for the job, just the operator driving crossed car along with the baseline. From the U.S. factory production situation, whether large, medium and small painting facilitie are a single production-based, namely, the production of thermoplastic marking machine manufacturers do not produce cold paint marking machine, production of cold paint marking machine of the manufacturers do not produce thermoplastic marking machine. The large vehicle coating equipment production in the United States more wider use. Germany lines striping machine manufacturers have production may be designated hot and cold material machinery, cold or hot scribing device that can be replaced as needed. Britain, France, as a single production-based. Common type and two types of hot melt marking machine adopts more. Hot melt road marking machine is used to brushing the hot melt reflective paint, paint pavement and strong bonding retroreflective effect. Marking machine technical requirements for such a structural material used in China so far only individual regions the introduction of such machinery, there is no ideal domestic models. Ordinary road marking machine due to adequate sources of raw materials and low price, use, and easy to transport, require relatively simple function of the marking machine, so dominant in the domestic traffic lines maintenance, especially in urban road maintenance. The DY-TRML type truck mounted road marking machine and tested a successful delivery and achieve stable performance, accurate marking, operational flexibility, paint consumption and film thickness are in line with the design standards for the successful completion of large-scale long-distance lines coating. The task is to create the conditions. Zhengzhou Dayu Road Marking Machinery Company was set up in the year 1992. As traffic lane coating facilities supplier in China, we are slao highest level of international road lane coating facilitie manufacture, present by road marking equipment and kinds of qualified traffic coating materials. Our famous products are thermoplastic machines for sale and reflective traffic lines marking paint! Dayu lines striping equipment has been sell well in China and have been exported abroad for our various strict product lines, reliable product quality, considerate sales service and competitive price! For more products models and types, please visit our machine website www.road-marking-machine.com! 1020 kg

Road lines reflective principle is relied on the directional reflection effect of the glass beads sprayed and painted on the road surface. When the incident illumination enter into the glass beads body since the air is light-repellent substance, glass beads are optically dense substances, and thus produces the refraction phenomenon and deep fold to reflection within the lines coatings and in the contact surface of the glass and coatings. Features of dayu brand thermoplastic road marking materials 1. Fast drying and relatively good abrasion resistance: The road will be open to traffic after 10 minutes for its fast drying, and can be maintained for over six months. 2. Good adhesion: There will be no stripping on the condition of assure the road surface is dry and clean and film thickness before coating road materials on it. 3. Bright and beautiful: Bright in color and meet industry standard. Road Marked Lanes with no yellowing, discoloring, cracking, but strong visibility. 4. Convenient construction: No special requirement for construction machine. Both equipment painting and manual spraying type are proper. 5. Brand traffic marking materials are made of high quality raw material, and its whole production processes of thermoplastic machine paint are finished by completely automatic production line, absolutely avoid quality defects caused by artificial operation, such as over large mixture ratio, unstable quality, and further make sure the traffic coating paint of high quality to customers.

Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc. 1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient. 2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking. 3. Adjustable guide rod can be freely adjusted up, down, to the left or right. 4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work. 5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure. 6. Paint tank is with a build-in filter device and air in-take filter in the feeding port. 7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient. 1600*1200*1500mm(l*w*h)

The asphalt mixing plant is the innovation product based on international advanced technology. The products are widely used for advanced road construction and maintenance. The asphalt mixing plant series with a productivity of 30-320 sets/hour, being high automatic intensity, accurate measuring and high dependability is an ideal choice in advanced road construction and maintenance. Its key components such as burning devices and sensors are all name brand products. The control system, adopting the programmable controller and professional engineering computer of siemens, can control the weight, stirring and putting material in automatic, semi-automatic and manual ways. The vane, mixing arm and blade are made of wear-resistant cast iron, so they have long performance life. Aggregate, ore power and bitumen are measured alone so as to ensure batching precision and reliability. Hot aggregate and ore power use double-stranded lifting machine with auto-tension system.If you have any enquires. Type, productivity Qlb500, 30-40t/h Lbj1000, 60-80t/h Lbm1500, 90-120t/h Lbm2000, 120-160t/h Qlb3000, 180-240t/h Hlb4000, 280-320t/h

Stabilized soil mixing plant is for continuously producing road bed stable layer material. There are three main kinds of stabilized soil stir equipment: module containerization, portable and fixed model. This series of product reaches more than 40 styles. Its productivity is 200 - 600mt/h. The machine is made up by aggregate batching supply weight system, ore power supply weight system, water supply system, stir device, material-stored device and control system. For adopting twin-horizontal force stirrer, it has a long performance life. Main characteristics: 1 for the compact structure products reaching our country's advanced level, it is Accurate to measure, of high quality to stir and the whole performance is good 2 computerize electronic frequency transfers batching system keeps high automatic intensity and batching accurate 3 it is easy to move and install 4 the machine can mix four, five or six kinds of materials together and formulate Various matching ratio steady soils The equipment is widely used in fields of roads, city buildings, advanced high Ways, railways, airports, and ports.

The concrete mixing plant series (25-240t/h) we have are the equipments which can Be used to produce dry and stiff plastic concrete. Our company has many years' Producing experience. The consumers are all over the country. The main characteristics of the concrete mixing plant series as follows: 1. Adopting twin forced horizontal shafts stirrer 2. The aggregate is measured alone or accumulated by the electronic scale. 3. Water and the additive are measured accurately under the centralized control of The computer. 4. The whole machine adopts pc to control, which is easy to operate and debug. 5. Two models for feeding aggregate: one by bucket elevator, the other by belt transfer. 6. The main electric elements are the devices of schneider in france; the programmable Controller is the product of siemens. Productivity: Hzs25: 25cbm/h Hzs35: 35cbm/h Hzs50: 50cbm/h Hzs60: 60cbm/h Hzs75-90: 75-90cbm/h Hzs100-120: 100-120cbm/h Hzs150: 150cbm/h

Ethanol /alcohol process line/machine,ethanol/alcohol turnkey project , industry fruit process machine/production line ,industry vegetable process machine/production line, industry noodle machine/production line , industry bread/cake machine/process line and so on . industry waste water treatment system process line .packing machine.Our company's products, technical support, training, installation and commissioning

Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment..

Road construction machinery (used).

Ferrous & non ferrous scraps such as rail scrap, copper scrap, aluminium scrap, new ferrous & non ferrous products such as copper cathode, aluminium ingots, oil spill bioremediation & absorption products from cotton lint and polymer based soil stabilization product (2kg to treat 50m3 soil). we also supply fuel products such as en590, jet fuel a1, d6, etc. from genuine suppliers/title holders..

Bonny light and other crude oil, heavy duty machine and equipment.

Backhoe Loader and Telehandler manufacturer based in . specializing in the production of backhoe loader, telehandler, off-road forklift, spin dig drill, and special-shaped construction machinery. has a decade of production experience, stable quality, and reasonable price. Products are exported to more than 20 regions and countries. We work with significant dealers and consumers globally. adheres to an integrity, quality business, and endeavors to work with customers for a win-win business. is a patented backhoe loader manufacturer, with a European CE certificate. Products are 360 -degree turntable, incorporating with Doosan oil cylinder driving part which helps move much more accessible and excavating much stronger.

Sakai TS200 Used PTR (9 Wheel) Year of Manufacture: 1996 Hours: 4,367 IN GOOD CONDITION

Kobelco LK50Z-5 Wheel Loader Year of Manufacture: 2012 Hours: 1,281 IN GOOD CONDITION

Sumitomo HA60W-5 Used Asphalt Finisher Year : 2004 Hours: 694 IN GOOD CONDITION

Used medical equipment and disposable medical supplies.Broker with the capability of sourcing many products.

Successful trial of this marking machine, first try to name the trunk road program discontinuity lines of the three, in line width of 15 cm, 10 cm wide dividing line, good practice, has not undergone any mechanical failure. Marking machine chassis car are used as the connection couplings to the standard auto parts, so removal is very convenient, not to engage in lines painting construction, carrying the car to complete the transportation task, a dual-purpose vehicle. The rapid increase in car ownership, the new construction of a large number of highways, urban roads and rural roads, marking paint demand soared, the new coating material with special security features continue to emerge, such as the ability to prevent the vehicle on the downhill and turn slip road skid coating; various shapes protruding structure marking paint, not only reflective properties good day 'in the rainy night marking the protruding part of the film of water flooded, and maintain a certain reflective properties, but also the paint marking designating the eye-catching flash rain line. It is worth mentioning that marking material construction technology and construction machinery has a great influence on the quality and performance of the coating, such as solvents at room temperature, water-based, two-group classification marking paint can be used high-pressure airless spray marking paint spray. Such as hot melt coating construction with a centrifugal coating method, the minimum coating thickness of the coating of the marking Hill original 1.5mm down to 0.7 mm, in the case of small changes in life, can reduce the amount of paint used. The hot melt classes and group classification coatings use of specialized construction machinery can be designated projecting marking shock features and reflective at night, the drainage pavement marking construction is also a good choice. Zhengzhou Dayu Road Marking Machinery Company was set up in the year 1992. As traffic lane coating facilities supplier in China, we are slao highest level of international road lane coating equipment manufacture, present by road marking equipment and kinds of qualified traffic coating paint. Our famous products are thermoplastic coating devices and reflective traffic lines marking paint! Dayu lines striping equipment has been sell well in China and have been exported abroad for our various strict product lines, reliable product quality, considerate sales service and competitive price! For more products models and types, please visit our machine 980 kg