Uhf 32 channel wireless amplifier
1. Uhf 700-960mhz professional channel
2. Lcd display af level, rf level, channel value, frequency value and battery life of transmitter and receiver.
3. Pll synthisized design, with high channel stability
4. Power off automatically under low voltage to protect inside accumulator
5. Pilotone & noise lock technology
6. Advanced smt technology to ensure the quality
7. Has got fcc approval
Main Feature:
1. Fashion front panel is made of brushed aluminums alloy;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection;
4. Powerful output capacity to achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
Technical Specifications:
8O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*800W
4O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*1200W
8Obridge mono (1kHz(EIA)with 0.5%THD):2400W
Voltage Gain: 5dB
Total Harmonic Distortion(THD):< 0.5%,20Hz-20kHz
Intermodulation Distortion(IMD):?0.35%
Slew Rate:>10V/us
Frequency Response (at 1 Watt): 20Hz-20kHz,+0/-1dB
Damping Factor (8 O), 10Hz-400Hz >200
Signal-to-Noise Ratio (below rated power,20Hz -20kHz, A-weighted ): >100dB
Crosstalk (below rated power) At 1 kHz At 20 kHz:-75dB -59dB
Input Sensitivity for full rated power at 8O: 0.775V or 1.4V
Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO
Input Connectors: Once balanced XLR per channel
Output Connectors(Speaker Connectors): 4-POLE Speakon per channel
Front Panel Controls: Power on/off switch, one gain control per channel
Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V
Power Indicator Signal Indicator: One red LED of work, One green LED per channel
Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel
Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Main Feature
1. Fashion front panel is made of aluminums alloy with metal wiredrawing craft surface treatment;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short, circuit protection, switch delay protection;
4. 4 channels output and 800W rated power of per channel can achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large stage performances, pubs, KTV rooms and conference halls etc.
Technical Specifications
8O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*800W
4O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*1100W
Frequency Response ref 1k:
THD+N:20Hz-20kHz,+0/-1dB
< 0.5%,20Hz-20kHz
Voltage Gain: 38.3dB
Intermodulation Distortion(IMD): ?0.35%
Slew Rate: >10V/us
Damping Factor (8 O), 10Hz-400Hz >200
Signal-to-Noise Ratio (20Hz -20kHz): >100dB
Crosstalk (1 kHz, 20 kHz): -75dB -59dB
Input Sensitivity for full rated power at 8O: 0.775V or 1.4V
Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO
Input Connectors: Once balanced XLR per channel
Output Connectors(Speaker Connectors): 4-POLE Speakon per channel
Front Panel Controls: Power on/off switch, one gain control per channel
Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V
Power Indicator Signal Indicator: One red LED of work, One green LED per channel
Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel
Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Ventilation: Flow-through ventilation form front to back
Cooling: speed regulated ,thermal protection
Main Feature
1. Fashion front panel is made of brushed aluminums alloy;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection;
4. Powerful output capacity to achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
18028 Pro Audio Amplifier Suppliers
Short on time? Let Pro Audio Amplifier sellers contact you.
Main Feature:
1. Fashion front panel is made of brushed aluminums alloy;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection;
4. Powerful output capacity to achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
Designed as the perfect Partner to the Marantz AV8802A processor it,s 7 channels deliver 150W (8 ohm) of RMS power (20Hz-20kHz).
Designed for the ultimate music and movie surround sound experience, the MM8077 7-channel power amplifier is equipped with the same amplifier technologies that are incorporated in our reference class hi-fi amplifiers, including our unique current feedback discrete power amplifier stage design, which features a high slew rate that provides a wide bandwidth for the utmost enjoyment of today,s high resolution audio formats. All output stages feature identical topology for uniform high quality sound across all channels, and the MM8077 provides the option to choose between balanced (XLR) and unbalanced (RCA) inputs for each channel, for maximum system configuration flexibility. High current, high bandwidth discrete power transistors can handle short term musical bursts with aplomb, even into difficult low impedance speaker loads.
7x 150W (8 ohm), 7x 180W (6 ohm) RMS power (20Hz-20kHz)
Current feedback discrete power amplifier
High current power supply with toroidal power transfomer
Marantz reference-grade power supply filter capacitors and high speed, high current discrete power transistors
Low impedance continuous drive capability
Highest sound quality design based on pure surround philosophy
Copper plated chassis
Gold plated, high grade speaker terminals
Flasher input, DC trigger (in/out), Remote control (in/out)
Ve-30rfm hdmi to rf matrix extender is designed to convert hdmi signal to hd digital tv
Signal based on dvb-t catv signal, it uses 64qam mode to realize the hd digital tv signal conversion
And transmit via coaxial cables for long distance.
With the advantages of good image quality, strong resistance to interference and hundreds channels
Available. It?s easy to build one-to-multi or multi-to-multi media matrix through extender, can be widely
Applied in cctv, outer large screen, shopping mall advertisement, media education and digital kvm fields
Etc.
To solve problems such as image pixilated, distortion, and transfer failure. Apply to commercial ads on
Screen walls, automatic industry digital board, medical facilities, the system to supervise and control
Multimedia education etc. In order to deal with the demand of digital media signal?s long distance
Transmission. The system is designed by rf transfer, providing more flexible choice for installation and
Operation.
Wt-640t/r professional wireless studio audio of digital transmit system. The series offer the perfect solution for performers, musicians, tour staffs and simultaneous interpreters. The system included light and portable type transmitter (wt-640t) and light and portable type receiver (wt-640r). It adopts uhf channel and pll (phase lock loop) frequency of synthesizer design enable to select multi-channel and let users to distinguish and operate easily through lcd panel display.
Type : anodizing distribution enclosure
Material : aluminum alloy 6063 + aluminum alloy 5052
Size : 80*35*100 mm (wxhxl )
Finish treatment : brush, anodized server
Stock color : black, sliver, gray, gold etc.
Price : we have our own factory so that we can offer the more competitive price
Quality : top slate raw material, skilled workers to provide good quality products.
Moq : if there are goods in stock, and no housing openings, the moq can be one.
Package : pearl cotton, foam corner, cartons
Delivery terms : ups/dhl/china air post/hk air post
Delivery time : 12-15days for bulk order , 7-10 days for sample , 1 day for stock.
Payment terms : l/c, t/t, paypal
Supply ability : 100000 pieces/month
Port : guangzhou, shenzhen, foshan
3.Oem service
1.Cut holes
2.Print logo
3.Design new style
4. Company information
Foshan nanhai yonggu hardware products factory was established in 2004, located in nanhai district, foshan city, guangdong province. Our company covers over 1, 500 square meters. There are many cnc machining centers, cnc milling, punching, drilling & grinding machines, sandblasting machines and other advanced processing equipment. We are specialized in the production of aluminum chassis, aluminum switch panel, diy chassis amplifier panel, shielded box, as well as a variety of specification knobs and machine feet and so on. Surface drawing, sandblasting, oxidation, screen printing and surface treatment can be customized. Our products are widely usedin instrument, electric power, telecommunication, radio and television, medical device, network, hotel and military supply.
18028 Pro Audio Amplifier Suppliers
Short on time? Let Pro Audio Amplifier sellers contact you.
