Olympus M Zuiko Digital Ed 40 150Mm Suppliers and Manufacturers

V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

This wood belongs to the shorea, which is a type of hardwood. It is most often employed in the making of furniture such as a bed, sofa, and also in flooring and roofing applications. Owing to its lightweight and light pink to light brown color variants, this wood is preferred for the interior designing. For this reason, we are facing a huge demand for the product. Meranti is a medium density hardwood. The timber glues with common adhesives, nails easily and stains well allowing ready finished in a variety of interal and external above ground applications. Color: Heartwood varies from pale pink to dark red, or from white to straw to yellow. Sapwood cannot be reliably identified by colour difference Origin: A tropical rainforest species found throughout South-East Asia and the islands of the South West Pacific region including the Philippines, Indonesia and east Malaysia. Application: Plywood, interior furniture, general construction, concrete forms, veneer, and boatbuilding. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2

This eco-friendly chew is made from coffee tree branches that are harvested from sustainable sources. The wood is hard and dense, making it ideal for satisfying your dog's chewing instincts and keeping their teeth clean. The chew is also splinter-free and safe for your dog to enjoy. Product detailed: -Product name: Coffee wood dog chew -Ingredient: Coffee wood -Shelf life: 24 months -Packing: 25kg - 50kg/ pp bag or as customer request -Color: Nature wood -Brand: VDELTA -Shipping: Sea -Payment: L/C, T/T, Wester Union Detailed packing' -Size S: length 13-14cm, Diameter 2cm-2.5cm 400 pieces/ carton -Size M: length 17-18cm, Diameter 2.8cm-3.5cm 160 pieces/ carton -Size L: length 19-20cm, Diameter 3.8cm-4.5cm 70 pieces/ carton -Size XL: length 21-22cm, Diameter 4.6cm-5.5cm 40 pieces/ carton Please contact me if you have any requests, I pleased to have business with you.

It has a beautiful natural honey golden hue, but more importantly it is famous for being highly resistant to rot, pests (bugs, termites and worms), and fungi in both land and marine environments. Teak is the premier choice for any requirement in the marine industry, from decks and interior work, to docks. Teak is naturally water-resistant and physically very strong and durable. It is not prone to significant expansion or contraction with humidity changes. The oils in teak are what make it weather-resistant and it requires basically no care when left outside. Its high silica content gives it non-skid properties as well as durability. This makes teak a great choice in damp environments, or in areas where slipping could be very dangerous. Application: Ship and boatbuilding, veneer, furniture, exterior construction, carving, turnings, and other small wood objects. Below are the popular sizes we are offering: Teak Round Logs Teak round logs are a premium choice for those in the market for lumber and timber products. The round logs are the result of a peeling process that removes the bark and exposes the wood's natural grain. Teak Square Logs Teak square logs are created through a process that involves cutting the round logs into square pieces, exposing the natural grain of the wood. This process results in a beautiful and smooth surface that is ready for further processing. Teak Cut to Size Timber Teak Cut to size timber has been precisely cut to the desired dimensions and specifications of a customer. The benefit of cut to size timber is that it eliminates the need for the customer to do any additional cutting or shaping, saving time and effort. Origin: Burma, Ecuador, India, Panama, Costa Rica, Nigeria, Ghana, Brazil, etc. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2

Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic

Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum

Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium

Power (W): 25/40/50; Power factor: 0,5/0,9; Voltage (V): 120/220-240/100-277; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/110/115; CRI (Ra): 80/90; Life span (hrs): 25.000; Various options: - Style: T-Bar/ M-Bar/ M-Bar Direct/ Clip Bar/ Bath point - Driver: Isolated/ non isolated - 120/220-240/100-277V - 1-CCT: 3000/4000/5000/5700/6500K - 3-CCT changeable (adjust by wall switch); Flicker-free; CE, KC, KS certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;

Power (W): 15/25/30/40/50/80; Power factor: 0,5/0,9; Voltage (V): 120/220-240/100-277; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 110; CRI (Ra): 80/90; Life span (hrs): 25.000; Various options: - Style: T-Bar/ M-Bar Direct/ Clip Bar - Voltage: 120/ 220�·240/ 100�·277V - 1-CCT: 3000/4000/5000/5700/6500K - 3-CCT changeable (adjust by wall switch); Flicker-free; CE, KC, KS certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;

Instant Coffee Vending Machine Model: 60SCW (Multi-media player for advertisment) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 6 Pcs/1500 ml each Boiler/Heater: 1.6L Drinks Supply: 6 Hot/Cold Drinks +Hot/Cold Water Operating Button: 14 smart touch buttons Display Screen : Digital Screen Multi-media player : 17 inches Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W500xD490xH780mm Packing Size : W580xD585xH860mm N.W/G.W : 40/44 Kgs

Instant Coffee Vending Machine Model: E-40S Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 4 Pcs/1500 ml each Drinks Supply: 4 Hot Drinks Boiler/Heater: 1.6L Operating Button: 4 smart touch buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W340xD450xH700mm Packing Size : W405xD525xH780mm N.W/G.W : 22/24.5 Kgs

Instant Coffee Vending Machine Model: D-50S-T Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 3000W Powder Canister: 2 Pcs special powder canister with the function of autimatic closing and normal canister 3 pcs 1500 ml each Drinks Supply: 5 Hot Drinks Boiler/Heater: 12.0L Big Advantage : Support to male drinks simutaneously Operating Button: 5 physical buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W445xD610xH850mm Packing Size : W520xD680xH920mm N.W/G.W : 35/40 Kgs

Instant Coffee Vending Machine Model: D-40S-T Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 3000W Powder Canister: 4 Pcs big powder canister 2500ml each Drinks Supply: 4 Hot Drinks Boiler/Heater: 6.0L Big Advantage : Support to male drinks simutaneously Operating Button: 4 physical buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W345xD610xH850mm Packing Size : W420xD680xH920mm N.W/G.W : 30/35 Kgs

Instant Coffee Vending Machine Model: D-40SA (Local Market)/Mode : E-40S(Foreign Market) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 16000W, 110-120V/60Hz 1600W Powder Canister: 2Pcs Special powder canister with the function of automatic-closing and normal canister 2 pcs 1500 ml each Drinks Supply: 4 Hot Drinks Boiler/Heater: 1.6L Operating Button: 4 physical buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W340xD470xH750mm Packing Size : W405xD525xH805mm N.W/G.W : 22/24.5 Kgs

Business Instant Coffee Vending Machine Model: 40-ST Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 4 Pcs/1500 ml each Boiler/Heater: 1.6L Drinks Supply: 4 Hot/Cold Drinks,total 8 selections Operating Button: 8 smart touch buttons Display Screen : Digital Screen Payment System : Multi-coins acceptor(Default), multi-bills acceptor (optional), installed in the matached cabinet), credit card reader(optional pluse protocol) Cup Dispenser : Automatic cup dispenser for 12-16 OZ paper cups, the cup mouth size 90mm, single cup bucket Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W450xD585xH580mm Packing Size : W520xD630xH680mm N.W/G.W : 53/65 Kgs

Nigerian Dried Hibiscus Flower Hand-picked quality Moisture less than 6% to 8% Total ash 10% max Acid insoluble ash 1.5% max Good scarlet flowers Purity 98.5% to 99% clean Sgs certification Free from salmonella & foreign matters 25 kg p.p bag net weights and 12.5 m/t per container Payment: by confirm l/c or cash against document with 30% advance payment. Dry shifting hibiscus specification 1. Hand-picked quality 2. Moisture less than 6% to 8% 3. Total ash 6% to 10% max 4. Acid insoluble ash 1.5% max 5. Good scarlet flowers 6. Purity 98.5 % to 99% clean 7. S.g.s certification 8. Free from salmonella 9. 40 kg in p.p bag net weights and 12.5 m/t per container We export: FOB, CNF, CIF Payment: by confirm l/c or cash against document with 30% advance payment.

Length: Length (40-50cm) Collar type: Lapel Collar Hooded: No hooded Belt Option: Yes Leather: Sheepskin Color: Black Size: S, M, L, XL,XS Item Number: FLCROC-34