Our shoe pur hot melt adhesive offers good bond strength, is temperature and weathering resistant, which can maintain its properties under severe environments. Compared with shoe eva adhesive, it has lower working temperature, just 130 to 150 degree celcius.
Our pur hot melt adhesive is mainly used for bonding of sports shoe components, such as shoe upper bonding, edge folding, toe part and heel part affixing. As it is very easy to apply, shoe makers can achieve improved productivity.
Our company offers three major types of woodworking PUR hot melt adhesive, which are edge banding type, profile wrapping type and flat lamination type. The edgebanding PUR glue is used for edge banding of PVC, ABS, PP, veneers on plywood board, particle board, block board, fiberboard, fireproof board, etc. The profile wrapping PUR adhesive can be used in wrapping or coating fiberboard, solid wood board and fireproof board profiles with PVC film, OPP film, paper material, wood material, and so on. The flat laminatioin PUR adhesive can be used for flat laminating process of wood -MDF with decorative foils, veneer, PVC, acrylic foils and plastic foils on flat laminating machine.
Containing no solvent, our woodworking PUR hot melt adhesive is an environmentally friendly product. It offers gap filling capacity, high adhesive property and good resistance to high temperature and low temperature. If used at proper temperature, the PUR hot melt glue provides good viscosity stability, high initial and final bond strength.
Soy wax refers to the wax produced from hydrogenated soybean oil. It is the main raw material for making craft candles, essential oils and aromatic candles,
Advantage
* ALL-NATURAL CANDLE MAKING: Our wax will burn clean and smooth without any worry of the unhealthy chemicals found in traditional paraffin wax. Unlike other wax brands who add unhealthy minerals to their wax, we use only plant-based additives that
are naturally found in the environment.
* IDEAL FOR PROFESSIONALS AND BEGINNERS: These professional-grade candle making supplies for adults are ideal both for beginners
and professionals. Even if this is your first attempt to make a DIY soy candle at home, thanks to this quality soy wax kit youâ??ll
be able to do it safely and effortlessly.
* MICROWAVABLE CANDLE WAX: The Freedom soy wax blend melts perfectly in the microwave and requires minimal equipment great for
those wanting small batches of candles. Try soy wax beads for candle making without the mess!
* PERFECT RESULTS: Using soy wax beads for candle making can help to avoid wonky tops, poor sidewall adhesion and uneven
fragrance. The best candle making supplies make the best soy candles!
Tiandiao hot melt adhesive, softening point of 80 degrees or so, this series product is suitable for display showcase display ark of goods such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, extra adhesive, suitable for all kinds of working environment.
Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with adhesive. The products have been certified by sgs, which is non - toxic. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
The product is called pp, epe hot melt adhesive, suitable for the adhesion of hard sticky materials such as pp and epe. Softening point at about 80anti-temperature about 70 the opening time in 15-20 s.Our products are non-toxic and insipid. High viscosity, fast curing, easy operation, continuous use without carbonization and yellowing resistance, comply with rosh instructions.
Instructions:
1.Recommended gluing method: dispensing
2.Recommended temperature: 130 to 150
3.If there is carbon deposition in a rubber case or hose, may consult equipment manufacturer, or clean with clean mineral oil under 120.
4.The stickiness of the adhesive can be adjusted by temperature.
5.It is prohibited to mix with other brand hot melt adhesive.
6.After adding material to the hot melt tank, the glue tank cover should be closed immediately to prevent foreign contamination.Td-
4184 Micronized Wax For Hot Melt Adhesive Suppliers
Short on time? Let Micronized Wax For Hot Melt Adhesive sellers contact you.
Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48
Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48
Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
BS 7100 is a premium TPE-based Spray-able Hot Melt Pressure Sensitive adhesive, offering exceptional bonding on various materials such as Rexine, Nonwovens, Paper, foil, and metal. With low viscosity at application temperature and high heat resistance, it is an ideal all-purpose adhesive.
BS 7100 is a premium-grade hot melt adhesive specially formulated to deliver exceptional bonding performance on a wide range of materials, including Rexine, Nonwovens, Paper, foil, and metal. Its unique TPE-based composition provides a strong and durable bond that stands up to various applications and environments.
With its low viscosity at application temperature, BS 7100 offers ease of use, making it an ideal choice for various bonding tasks. The adhesive exhibits excellent bonding characteristics and high heat resistance, ensuring reliable and long-lasting adhesion in demanding conditions.
One of the key advantages of BS 7100 is its versatile spread and flow characteristics, which allow for both moderate and high-speed applications without undesirable stringing. This enhances productivity and efficiency, making it suitable for a wide range of manufacturing processes.
Whether you need to bond different materials for upholstery, packaging, or industrial applications, BS 7100 is your go-to adhesive solution. Experience the strength, durability, and ease of application with this all-purpose hot melt adhesive. Choose BS 7100 for superior results in your bonding projects.
Grade BS 7100
Raw Material Base Thermoplastic Elastomer
Appearance Translucent
State Solid at room temperature
Form Blocks
Viscosity 2500 cps at 160 C
R & B Softening Range 90 C + 5 C
Speed of Set Slow
Storage Life Up to 12 months
Odour Negligible
0.1um micron for (PFE) 95%(BFE) 99%
The 3D design structure provides better wearing, and with foam nose cover for excellent fitness.
Uses a low-allergenic filter layer without latex.
1.Size: for adult
2.Material: Non-woven, melt-blown, P.P. spun bond.
3.Total layers: 5 layers
4.Color: White
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil.
The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
This series of products are suitable for all kinds of sealing mouth glue, softening point of 80 degrees or so, mainly for the bottom of the bag, carpet glue, carpet ruffled, express single seal, wood sealing side, automotive interior bonding, arm in arm bag on the ground, dialysis paper, paper bag sealing glue sealing purpose, guarantee the bonding material without extra adhesive, stability, safety and health, no harm to human body, no taste, using at ease. Suitable for carton sealing, milk powder box, other color box and other sealing or bottom, side bonding with hot melt adhesive. Open time moderate, very excellent low - temperature resistance. - 20 below zero remains very strong cohesive force. It has very good temperature resistance. The product has good weather resistance and strong adhesion.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive.
Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180
Resin hot melt adhesive, softening point of 80 degrees or so, this series of product is suitable for display rack of goods. They have several models, such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, without extra adhesive, suitable for all kinds of working environment.
Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with glue. The products have been certified by sgs, which is non - toxic.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue.
1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
This series of products can achieve good adhesion effect, environmental tasteless, high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special glue. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a filter degumming problem such as rubber, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation.
PE coil pipes and tubes for water and wire cable conduit PL231
The PE coil pipes and tubes can be used:
water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm
We use new 100% pure raw PE material
WHY NEW MATERIAL HDPE PIPES?
1. Health performance
PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.
2. Corrosion resistance
It can resist various chemical media erosion, with no electrochemical corrosion.
3. Service life
Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.
4. Impact resistance
PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.
5. Connection performance
The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.
6. Construction performance
It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.
Akfix HM 788 is a synthetic resin and EVA based hot melt adhesive of thermoplastic characteristic that gives perfect results with straight edge banding works where lower softening point and fast bonding is needed.
Carnauba wax, also known as card that Pakistan wax, yellow solid angle, can be bleached, hard and brittle, not soluble in water, soluble in hot ethanol, hot ether, hot chlorine letter, carbon tetrachloride, oils,.
The main components of palmitic acid ester and wax beeswax acid, cosmetic raw material of a hardness of the wisest, and castor oil and other fats and oils and raw materials, good compatibility,
Cosmetics commonly used for tablets curing agent, widely used in lipsticks and cream cream category cosmetics,
As a substitute for beeswax to enhance the melting point of spindle-shaped cosmetics, gives luster and heat stability.
Specification
specNo.1 standrad value
color gold yellow
surface flakes
Smell bees wax smell
peroxide value 4
acid value(koh/mg/g) 4
Saponification(koh/mg/g) 78-95
melting point C 80-86
viscosity(cp)C 21.6
standard value
5-14
Paraffin wax is a translucent soft solid commonly referred to as wax. It is extracted from petroleum and burns readily. Paraffin Wax is used for several purposes. Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. These waxes are categorized by oil content and the degree of refinement.
Application: Candle manufacture, wax paper, polishes, cosmetics, electrical insulation assist in extracting perfume from flowers, medical ointment, Pharmacy, Batteries, Paint and varnish removers, waterproof coat for wood, match industry, Corrosion inhibitor, food and chocolate polishing, PVC lubricant. some factories mix paraffin wax 3-5% with 1-1.5% to receive a better quality.
Packing: 25kg Carton Box
Item Specification
Melting Point: 58 -64C
Oil Content: 1%- 5%
Colour: Off White
Flash point: 250 C
4184 Micronized Wax For Hot Melt Adhesive Suppliers
Short on time? Let Micronized Wax For Hot Melt Adhesive sellers contact you.
