Kn95 Medical Mask With Valve Suppliers and Manufacturers

General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto

Good Feeling 2D KF94 Quarantine Mask is a quality product approved by the Korean Ministry of Food and Drug Safety.  Respiratory protection from harmful particulate matter such as yellow dust, fine dust, and infectious sources  1. V-Fit thin face design With thin face visual effect. The inside does not touch the lips for a comfortable fit. 2. High-specification MB filter The Korean-made high-standard MB filter can block more than 94% of particulate harmful substances such as sandstorms, fine dust (PM2.5), and infection sources. 3. High elastic ear straps Use high elastic ear straps for comfortable wearing Mask size (unopened): 13 (w) x 14.5 (h) cm

EZ Well KF94 Quarantine Mask is a quality product approved by the Korean Ministry of Food and Drug Safety. In addition to this, has both FDA and CE certified Respiratory protection from harmful particulate matter such as yellow dust, fine dust, and infectious sources 1. The three-dimensional quadruple structure certified by the Korean Ministry of Food and Drug Safety securely blocks the outside (4 Layer using a melt-blown filter) 2. A fine dust mask that is comfortable to breathe because it does not touch your mouth! Excellent breathability. 3. It adheres smoothly along the face line and prevents fogging with the nose wireframe and ear wireframe. 4. It has an Excellent Mark from DermaTest in German which did not lead to toxic-irritative intolerance reactions in patch testing carried out in accordance with international guidelines

Airish Plus CLEAN SHIELD Health Mask FFP2 A necessary health mask for safe and pleasant breathing by filtering the yellow dust, fine particles, and source of infections that threatens our daily life. The three-stage folding design makes it easy to wear and easy to carry around. High-efficiency filters provide an excellent defense. Highly hermeticity and easy to breathe is a three-dimensional structure. The mask's interior space is wide, so it's comfortable to use for a long time 1. Three-dimensional structure with easy breathing 2. Protection from PM2.5 & Fine Dust, Infectious Source 3. Highly defensive FFP2 High-Efficiency Filter

High quality Sublimation printed 3 layer fabrics mask, 1st Layer: 100% polyester, 2nd Layer: Melt Blown 98% filter fabrics, 3 rd layer: 100% cotton soft fabrics. 50+ time washable for reuse. SGS certificate on Air filtration and breathable.

High quality 3 layer fabrics mask, 1st Layer: 100% polyester, 2nd Layer: Melt Blown 98% filter fabrics, 3 rd layer: 100% cotton soft fabrics. 50+ time washable for reuse. SGS certificate on Air filtration and breathable.

High quality 3 layer fabrics mask, 1st Layer: 100% polyester, 2nd Layer: Melt Blown 98% filter fabrics, 3 rd layer: 100% cotton soft fabrics. 50+ time washable for reuse. SGS certificate on Air filtration and breathable.

CE certified , High quality, 3 layer, melt blown air filtration 98% , SGS certificate, Water proof, Disposable , 10pcs, 20 pcs and 50pcs box ,

3 layer Printed fabrics mask , 1st layer: 100% cotton printed, 2nd layer: 98% Air filter melt blown , 3rd layer: 100% cotton fabrics. 50+time washable and reusable, high quality and soft. SGS test report on Air filtration.

High quality 3 layer fabrics mask, 1st Layer: 100% polyester, 2nd Layer: Melt Blown 98% filter fabrics, 3 rd layer: 100% cotton soft fabrics. 50+ time washable for reuse. SGS certificate on Air filtration and breathable.

DESCRIPTION : 3 Ply Protective CIVILIAN disposable mask GB/T32610-2016 Material: Outside layer 25g blue non-woven Middle layer-25g melt blow filter 95% Inside 25g white non-woven Size: 17.5*9.5cm Color:Blue and white, Model No : 3Ply CIVILIAN . Quantity Pcs ; 10 Packing details : 50pcs per box, 40boxes/ctn,2,000pcs/ctn, G.W.:8.7kgs,carton size:54*42*35.5cm

Features Utilizes special filtration layer for good breath ability and protection. Along with the Motex loop adjuster provides great coverage to decrease leakage. Size: For adults Material: Non-woven, elastic earband, nosewire, PP air filter Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven

Kids Mask US$ 0.0498 - 0.285 / Piece Get Freight Cost Calculate Margin 50000 Pieces Minimum Order : 3 - 30 days Product Details Model Number : Kid Mask-#5560 Brand Name : WinHealth (Future) Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: Kids Mask medical mask, Ear loop Applicable People : Children Standard : YY/T 0969-2013 Filter Rating : 95%-99% Size : 14.5*9.5CM, 14.5*9.5CM Stock : Yes Shelf Life : 2 years Quality Certification : yes Safety standard : EN 149 -2001+A1-2009 Instrument classification : Class II Material : non-woven+meltblown, Melt-blown Fabric,non woven Product name : Children's masks Color : color,print cartoon Application : Personal Care Layer : 3 Plys Packing : 2500pcs/carton;10pcs/bag, 50pcs/box , 50box/carton MOQ : 10000 PCS OEM : Accept OEM

Features: Full Facepiece Respirator Large lens for wide field of view Lightweight, balanced design Silicone face seal for greater comfort and durability Characteristics Double exhalation valve; Low respiratory resistance; The transmission device design make the information transfer more clear Used Oil, Machine maintenance, Construction, Gas ,Electric power, Shipbuilding, Transport, Mine, Chemical plant, but not for radioactive high toxic particulate matter.

Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Outer Layer: Water-repellent non-woven 4. Middle Layer: High level static filtration non-woven 5. Inner Layer: Microfilter Thermal-bond non-woven 6. Nose band: PE iron wire

Face Mask for Drinking and Whistling

Code 93200: Suitable for the removal of bad odor, organic vapours from polluted environment, and for riding bike and motorcycle. Features Suitable for the removal of bad odor, organic vapors from polluted environment, and for riding bike and motorcycle. 1. Type: Flat shape, 4-ply, non-sterile 2. Size: For adults 3. Color: White 4. Outer Layer: Water-repellent non-woven Middle 1 Layer: Activated carbon with PE+ polyester Middle 2 Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven 5. Nose band: PE iron wire

Code 93170: Suitable for Anti-pollen and air pollution. Features Medical level for general use. Non-woven material 99% BFE at 3 micron. Type: Flat shape, 3-ply, non-sterile, earloop Color: Black Nose band: PE iron wire Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven