Pneumatic Valve: 2/2 Valve, 2/5 Valve, 3/5 .
Solenoid valves connectors 8mm sub-micro connectors are made according to din 43650 / iso 4400, en175301-803:2000 forms. The mini and 9.4mm sub-micro connectors are industry standards and are used where rapid installation and service are a must. Both the mini and 9.4mm sub-micro connectors are compatible with din 43650 form. All are used as protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves. Connectors offer distinct advantages over "hardwired" solenoid valves because of their modular design. Better than molded construction when special wire is needed or when using one long wire run. General technical data Color: black, gray or translucent for lighted styles Cross section of the conductor wire max.: 14 awg Rated voltage max.: 300 vdc / 250 vac 50/60 hz Environmental protection: nema 4 and ip 65 dust tight and water resistant Maximum rated temperatures for gaskets: Nitrile gasket: -25to +90 Silicone gasket: -40to +125 Plastic bag, inner box, master carton
Feature 1.Adopting straight-action diaphragm structure without pressure starting Enlarges its applicable scopes. 2.Adopting plate diaphragm structure with reliable start and close lengthens The service life of the product. 3.Selecting plastic sealed coil improves the safe application of this Product under many environments.
2W(Large Aperture)Series Two-position Two-way Direct Drive Type Solenoid Valve Feature 1.Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes. 2.Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product. 3.Selecting plastic sealed coil improves the safe application of this product under many environments. Carton:42*35*21.
Brand:tork Size:1/8"..2" Pressure: 5bar max, 180 c degree Coil voltage:220/230 v ac, 110v, 24v, 12v ac dc 100 pcs
Brand:tork Certificate:ce, iso9001:2000, atex, tse Body:brass Size:1/8"...3" Voltage:220, 110, 24, 12 v ac dc 100 pcs
Hydraulic solenoid valve 1.Nominal size: 1/4"(d03)(ng06) 2.Max. Flow rate: 16 gpm(60 l/min) 3.Max. Pressure: 5000 psi(350 kgf/cm2); allowable backpressure: 1000~2285 psi(70~160kgf/cm2) 4.Frequency operation: 240 cpm 5.Coil voltage: ac9v~ac380v 6.Coil frequency: 50hz/ 60hz 7.We conform to the international standard iso-4401-03 allowing use on the industry standard manifolds and subplates. 8.Din plug connector standard with directed pilot light conforming to din-43650. 9. Larger flow paths in the main body to raise the flow and pressure. 10.We offer over 100 types of spool functions in our stock.
2/2 way normal close and valve body are forged for brass. The stainless steel with movable core can give fast response And also wear well. Be widely used in gas, steam, oil and water automatic control. Structure specification parameter: Type: normal close Action method: direct pistion Diameter of current: 2.7mm Diameter of connection: 1/4" Material of body: brass Use fluid: steam, air, oil, water, gas
Pneumatics solenoid valves
Fdf series solenoid valve Prot size 2mm Connection6.5mm Motion type usually close
GR Series Solenoid Valve It is a pneumatic valve controlled by micro eletric signal,with small dimension, large flow, handsome shape,reliable performance and long service life.It can be installed in integration.It is an ideal directional control element,applicable to the electromechanical integration.There are multiple specifications for your choice. Eletrical entry Lead wire,DIN Standard voltage AC110V,AC220V,DC24V Allowable í+10% Isolated grade Class B or Equivalent Excitation time 0.05 second Power consumption AC Direct:5.6VA,Keep on:5.4VA DC 4W Surge voltage AC:Varistor,DC:Diode Indicator light Neon Light,LED Specification Item GR23V241-08 GR23V31-10 GR25V11-06 GR25V42-15 GR35V12-06C GR35V42-15C Valve Type 2 Position/3 Ports 2 Position/5 Ports 3 Position/5 Ports Pipe Thread(mm) G1/4 G3/8 G1/8 G1/2 G1/8 G1/2 Port Size 8 10 6 15 6 15 Operating Fluid Compresssed Air Pressure Range 0.15~0.8Mpa Motion Pattern Internally Piloted ---
Solenoid valve 12C9862 for LiuGong DUMP TRUCK SKU: 91-2C9-862 TYPE: GENUINE CATEGORY: LiuGong Dump Truck parts LiuGong parts
The specific product size, weight and price are subject to inquiry hydraulic components: electronic unit, pressure switch, pressure relay, hydraulic motor, gear pump, pressure reducing valve, reversing valve, vane pump, solenoid valve, variable pump, pilot-operated pressure reducing valve, plunger pump, solenoid valve, stacking valve, relief valve, proportional valve .
SOLENOID VALVE 4WE6D62/EG220N9K4/V for Power Plant is specialized in producing, manufacturing and selling industrial spare parts, as well as providing products of famous brands. Since 1989, our products have being widely used in various industries from power, oil, chemical, electronic, gas to environmental protection, fire-fighting equipments and Need more products for power plant now if you don't know where to search a product. #DF-SOLENOID VALVE 4WE6D62/EG220N9K4/V-DF hydraulic filter XFL-190 30H Connector 4-Pin P28J2Q generator generator stator cooling water alternate filter SL-12/50 filter cartridge WU-800 80-J gate valve JC65-1.6P Steam Turbine Sealant ET-1 2kg Solenoid valve 57D-16-611-JA 24V globe valve diagram DY25.PE492-EF lvdt linear position sensor TDZ-1-13 air filter replacement for air purifiers D-G2A double cartridge filter FAX (NX)-100 1 fluid transfer pump A3H37-F-R-01KK-10 hydraulic filter life NX-400 1 Casting Valve J41W-16P DN15 solenoid valve book HQ16.81Z high pressure hydraulic filter TZX2W 400 180 oil filter assembly ZUH10 20S CV Servo Card DMSVC005 pneumatic solenoid valve 4WE6Y50/AC220NE4VMFZ3-22YC DC220V 30W Thermal Power Filling Adhesive HDJ-18 cartridge heater electric heating heater ZJ-22-19 air filter QUQ3 SEAT TP4Y611-4 solenoid valve Z620655 hydraulic filter mount HC4754FKN13H solenoid valve aprilaire 550 02-178116 Rtv Hr Anti-Corona Varnish J0701 insulating box patch board DFYL-2022-8-30-ZJ
Step-by-step direct-acting solenoid valve Principle: It is a combination of direct motion and pilot type. When there is no pressure difference between the inlet and the outlet, after energization, the electromagnetic force directly lifts the pilot small valve and the main valve closing member upward, and the valve opens. When the inlet and outlet reach the starting pressure difference, after the energization, the electromagnetic force leads the small valve, the pressure of the lower chamber of the main valve rises, and the pressure of the upper chamber drops, so that the main valve is pushed upward by the pressure difference; when the power is off, the pilot valve uses the spring The force or medium pressure pushes the closure and moves down to close the valve. Features: It can also be operated at zero pressure difference or vacuum or high pressure, but the power is large, and it must be installed horizontally. Pilot solenoid valve Principle: When energized, the electromagnetic force opens the pilot hole, the pressure in the upper chamber drops rapidly, and a pressure difference between the lower part and the lower part is formed around the closing member. The fluid pressure pushes the closing member upward to move the valve to open; when the power is off, the spring force leads the pilot. The hole is closed, and the inlet pressure passes through the bypass hole. The rapid chamber forms a lower high and high pressure difference around the valve closing member, and the fluid pressure pushes the closing member downward to close the valve. Features: The upper limit of the fluid pressure range is high, can be installed arbitrarily (customized), but must meet the fluid pressure difference conditions. 2, the difference between the solenoid valve from the valve structure and material and the principle, divided into six sub-categories: direct-moving diaphragm structure, step-by-step direct diaphragm structure, pilot diaphragm structure, direct-acting piston structure, Step-by-step linear motion piston structure and pilot piston structure. 3. Solenoid valves are classified according to their functions: water solenoid valve, steam solenoid valve, refrigeration solenoid valve, low temperature solenoid valve, gas solenoid valve, fire solenoid valve, ammonia solenoid valve, gas solenoid valve, liquid solenoid valve, miniature solenoid valve, Pulse solenoid valve, hydraulic solenoid valve normally open solenoid valve, oil solenoid valve, DC solenoid valve, high pressure solenoid valve, explosion-proof solenoid valve, etc.
After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02
For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19
Engine Variable Valve Timing VANOS Solenoid For " BMW " Part Number : 11367585425
Engine Variable Timing Solenoid For " BMW " Part Number : 11368610388
2/2 way normal close and valve body are forged for brass. The stainless steel with movable core can give fast response and also wear well. This valve include current adjust switch could be widely used in gas, steam, oil and water automatic control.
