Name of product-Coconut shell Activated carbon/ Activated carbon/Activated carbon for Gold recovery/Activated carbon for water treatment/Activated carbon for Gas treatment Key Specifications/Special Features: Iodine- 900 to 1400 , CTC - 45 to 100 we can able supply Mesh Size: 4x8,6x12,8x16,8x30,12x40,12x30,20x50,30x60,50x100,50x200, below100 Mesh, 90% Pass Below 200 Mesh, minus 325
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
Activated carbon has very high capacity to adsorb organics, inorganics, bad taste and odour material. Adsorption capacity is enhance by modifications such as acid washing because this modification removes the acid soluble inorganic materials from the carbon and make it more porous, efficient and useful for various liquid process applications such as waste water treatment, water purification, decolourisation process in chemical and pharmaceutical industries, food and beverage industry for many purposes such as decolourization of sugar, dechlorination, decaffeination, purification of organic compounds, etc. Some of the benefits of Acid Wash carbon include Dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. Available in different mess Size as per customer requirement.
One of the main applications of granular activated carbon is the purification of water. Its function is the retention of organic contaminants and the elimination, by chemical reaction, of the free residual chlorine that remains in the water after the disinfection stage. In order to inhibit bacterial growth, the surface of the carbon is impregnated with 0.1% metallic silver to make carbon bacteriostatic using ionic silver to enable it to bind strongly with carbon surface to make it suitable to function and purify large volumes of water. - High efficiency - Negligible silver leaching - No health hazards to humans - No loss in Bacteriostatic property up to 6000 litres water - Available in Granular and block form
To suit the requirements of water purification, modern approach is to filtering huge volumes of water contaminated with many organic and inorganic contaminants but in form of blocks along with reverse osmosis, UV irradiation, mineral addition, etc. Carbon blocks are engineered and manufactured using compression molding or extrusion for different applications such as dechlorination, bad taste and odour removal, chloramines and organic materials removal, VOC removal, heavy metal removal, etc. Carbon blocks provide effective and versatile filtration for a wide range of different applications such as sediment and chemical removal. - Manufactured from coconut shell based low ash, micro porous Activated Carbon. - Designed to be used in most standard size housings. - High adsorptive capacity & high Iron, HMR & VOC removal Capacity - Simultaneously removes chlorine, bad taste, odour and organic contaminants from water. - Provides particular filtration and high dirt capacity. Size & Diameter can be customised as per the Buyers requirements
Impregnated activated carbons assist with removal of odorous sulphur compounds in sewage pumping stations, personal protection respirators, and removal of corrosive gases from air intake systems specifically in electronics manufacturing facilities, museums etc.
Flexus Global provides filter media which protect against acid gases and alkaline species such as ammonia gases and its derivatives from air and gas streams. Available in Different Mesh Sizes as per Buyer's Requirement.
Mercury and its compounds are cumulative toxins that are harmful even when taken in very small amounts. Itâ??s unique properties allow widespread applications across the paper and pulp industry, chemical processors, & other various manufacturers. Activated carbons are an excellent solution to control the widespread discharge of elemental mercury and its salts. Flexus Global provides Specially designed Carbon to treat a variety of flue gas compositions, high adsorption capacity for many pollutants with exceptional mercury removal rates and low carbon usage. Most commonly used adsorbents for removal of pollutants and treatment of wastewater. Available in Different Mesh Sizes.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future.Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation
Welcome to Gremlog Trading DMCC, a catalyst for sustainable solutions and innovation. We are thrilled to introduce our premier offering carbon dust, a by-product of aluminium smelting . As the primary supplier for carbon dust production, Gremlog Trading DMCC is at the forefront of this groundbreaking initiative. This high-carbon-content by-product, generated during the production of anodes for aluminium smelting, stands as a remarkable alternative fuel for the cement and steel industry.
2023 New Food Grade High Quality Pharmaceutical Grade Coconut Shell Activated Carbon Pellet Product Specification Index Project YT101 YT102 Grain 10-24meshsize 2.0-0.8mm % â?¥ 98 â?¥96 Iodine value Mg/g â?¥1000 â?¥900 Methyl blue decolorizing ability Ml/g â?¥10 â?¥8 Hardness % â?¥98 â?¥96 Moisture % â?¤10 â?¤10 Ash % â?¤3 â?¤5 Bulk density g/m�³ 0.45-0.55 0.45-0.55 PH / 6-8 6-8 Supply Ability 20 Ton/Tons per Day Packaging Details 25kg/bag Can be customized according to requirements
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Place of Origin:South Africa Brand Name:Coconut Shell activated carbon Material:COCONUT SHELL Application:Chemical Industry Shape:Granular 8x16 8x30 12x40 200 mesh
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
IRON REMOVAL BLOCK - Iron is one of the major problem in ground water of many areas in India. Excessive levels of iron above 0.3 mg/l in water, may lead to many problems in usage and also adverse health effects. Iron will be in the form of Fe2+, Fe3+ and as few more other compounds in dissolved state in water. Iron imparts color in water if it is excessive, which leads to aesthetic effects in water. If it is used for laundry application, affects the color of the white fabric. Size & Diameter can be customised as per buyer's requirement.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
