A spiral heat exchanger refers to a pair of flat surfaces that are coiled to form the two channels in a counter-flow arrangement. Each of the two channels has one long curved path. The main advantage of this device is its highly efficient use of space.
Plate heat exchanger is an ideal equipment for heat transmitting of liquid and air, suitable for various types of drinks and industry liquid in the produce of heating, sterilization, cooling, vapouring, condensation and heat recovery. It is widely applied in the light industry, food, medicine, textile, chemical air conditioning and heating. Model BR0.05-1.0-0.5~5-ES-IIBJ(Z) Series: Plate Dimension: 490¡Á170¡Á4.7mm Heat Exchanger are Single Piece(m2): 0.05 Angel Hole Diameter: ¦µ38mm Exchange Area per Set (m2): 0.5~5 Max. Working Pressure: 1Mpa Max. Working Temp.: 120~150(¡æ).
Plate heat exchanger
Plate heat exchangers (PHE) that are used in various industrial applications such as cooling, heating and heat regeneration of liquids.
Brazed plate heat exchanger Bl14 n means number of plates Length (mm): 206 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 0.7+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc Bl14a n means number of plates Length (mm): 190 Width (mm): 80 Thickness (mm): 10+2.3n Weight (kg): 0.9+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Bl20 n means number of plates Length (mm): 310 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 1.0+0.08n Channel volume (l): 0.018(n-2) Exchange area (m2): 0.020(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Bl26 n means number of plates Length (mm): 325 Width (mm): 111 Thickness (mm): 10+2.35n Weight (kg): 1.3+0.13n Channel volume (l): 0.025(n-2) Exchange area (m2): 0.026(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Plate material: aisi316l/304c Connection material: aisi304 Brazed material: nickel/copper Max design tempt: 150grc/225grc Min design tempt: -160grc Max design pressure: 30barg/45barg Advantages of brazed phe: Compact structure and easy installation Small consumption of water Low scaling coefficient Light in weight and durability
Gasket plate heat exchanger Plate material--applicable fluids Stainless steel(sus304, sus316l)--clean water, river water, edible oil, mineral oil Ti--sea water, salty water, salinous compounds 20cr, 18ni, smo--low concentrated sulface acid, inorganic water Nickel--high temperature and high concentrated caustic soda Hastelloy--high concentrated sulfate acid, chloride acid, phosphate acid Gasket material(applicable temperature)--applicable fluids Nbr(-15grc~135grc)--water, sea water, mineral oil, salinous water Epdm(-25grc~180grc)--hot water, steam, acid, alkali F26(-55grc~230grc)--acid, alkali Ftp(0grc~160grc)--high concentrated acid, alkali, high temperature oil, steam Advantages of gasket phe: .High heating transferring coefficient .High heat recovery rate .Great flexibility .Low flow stagnation .Compact structure and easy maintenance
Aluminium is used extensively in the transport industry due to its high strength to weight ratio and its excellent impact absorption qualities. Western countries use an average of 140kg of aluminium per vehicle, whereas it stands at 40kg per vehicle in India. Hindalco's high-quality aluminium is preferred for its superior alloy composition and metallurgical properties that meet stringent performance parameters. Our expertise is backed by the superior Wagstaff AirSlip casting technology. From brakes to ignition, transmission to suspension, cooling and exhaust systems to windows and structurals, ornamentals to accessories, automobile heat exchangers and registration plates, Hindalcoâ??s superior aluminium material is for making the most precise automobile components.
Plate Heat Exchanger uses metal plates to transmit heat between two fluids and is available in different specifications. Also, using this modern solution has more advantages over conventional heat exchangers. At Process Engineers And Associates, you will get the unparalleled quality at industry leading prices. Being one of the industryâ??s leading Plate Heat Exchanger Manufacturers In Delhi/NCR, we offer several specifications to choose from. Major Characteristics Of Plate Heat Exchanger Are: Simple And Compact Design: This Industrial Plate Heat Exchanger has a simple fabrication and comes in small and easy-to-use designs to fit in your industry premises. These thin sheets have corrugations and patterns to increase the surface area as well as the efficiency of the products. Quick To Clean And Maintain: These Heat Exchangers are made of good quality metal, which makes it easier to clean and maintain them after completing the application. Easy To Enhance The Capacity: You can simply expand the size and capacity of the sheet by just adding one along with others. Application Areas: Steel Industry Marine Industry Pharma Industry Dairy Industry Beverage Industry
We are available with wide range of Plate Heat Exchangers: Alfa Laval A-10HBM M-10BW AM-10 A-10BFM M-10MFM AM-20HBM A-15HBM M-10BFM AM-20BFM A-15BFM M-15BFM MX-25BFM A-15BW M-15MFM AX-30HBM A-20HBM M-20M AX-30BFM A-20BFM M-3 P-252 AK-20FM M-30FM P-31 M-6M AK-20 P-32 M-6MW MK-15BW P-2 Contact Goyam Marine for further details
Plate Heat Exchangers as well as plates and gaskets separately. Our models are similar to those of Sondex and Funke companies. ARES offers PHE models: A1S, A1L, A2S, A2L, A3S, A4A, A6S, A6M, A8S, A8L, A12S
Complete Set with Stainless steel AISI 316/ 316L plates. Suitable NBR, HNBR, EPDM, Viton, FKM, Special gasket Set.
The plate heat exchanger is composed of a set of corrugated metal plates with four corner holes for the passage of two liquids for heat transfer. The metal sheet is mounted in a frame having a fixed plate and a movable pressing plate on one side and clamped by a clamp bolt. A gasket is placed over the plate to seal the fluid passages and direct fluid flow alternately into the respective passages to form a heat exchange. The flow, physical properties, pressure drop and temperature difference of the fluid determine the number and size of the plates. The corrugation of the plate not only increases the degree of turbulence but also forms a number of support points sufficient to withstand the pressure difference between the media. The metal plate and the movable compression plate are suspended on the upper guide bar and positioned by the lower guide bar, while the rod end is fixed on the support. On the column, but if one or both of the liquids pass through the heat exchanger more than once, the interface should be on the fixed plate and the movable compression plate. In most cases, one-way is used, and all the pipes are connected to the fixed platen. On, check the shoes to open the heat exchanger without disassembling the pipe.
Principle A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that assembled from metal sheets with corrugated pattern and different kind of gaskets. Plate heat exchangers are the ideal equipment for heat exchange between liquid-liquid and liquid-vapor.In the case of the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tube heat exchanger, but the floor space is one-third of the tube heat exchanger, and the heat recovery rate can be as high as 90% or more. Maximum volume: 5000m3 /h;Maximum design pressure: 25bar Maximum temperature: 200 celsius degree; Minimum difference in temperature: 0.5-1 celsius degree Nozzle diameter: DN15~DN500;Plate thickness: 0.4mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L. Plate heat exchanger High heat transfer coefficient The design of the plate corrugation is aimed at the high thermal conductivity. The special flow path are formed by the plate corrugation causing strong disturbance flow at a very low flow rate, which is called turbulent flow. And the disturbance flow can be self-cleaning to prevent fouling and thus the heat transfer efficiency is high. Plate heat exchanger Large logarithmic temperature difference The temperature difference at the end is small, and the plate heat exchanger is mostly a cocurrent or countercurrent type of flow. In addition,there's no bypass flow. Plate heat exchanger Small footprint and easy maintenance The plate heat exchanger has a compact structure, and the heat exchange area per unit volume is 2-5 times that of the shell-and-tube type, and the floor area of the plate heat exchanger is about 1/2-1/3 of the shell - tube heat exchanger when achieving same heat exchange capacity .
Product principle The plate and shell heat exchanger adopts a circular corrugated heat exchanger plate that welded into a heat exchanger lathed bundle and combined with the structure of the pressure vessel shell. It also has a high heat transfer efficiency,compact structure and resistant to high temperature & pressure like shell tube heat exchanger. The plate and shell heat is durable under high temperature & pressure,large temperature difference and thermal shock, which is in a leading position in the industry. Maximum volume:2500m3/h; Maximum design pressure:100bar Maximum temperature:450 celsius degree; Minimum difference in temperature:0.5-1celsius degree Nozzle diameter:DN25~DN500; Plate thickness:0.8mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L. Features Plate Shell Heat Exchanger Safe and reliable Unique and durable lathed bundle structure: It can resist pressure shock and thermal shock very well; round plate and circular ring welding, stress distributes evenly; no welding between lathed bundle and shell, and it can withstand various thermal expansion (deformation ).The tubular shell structure is a strong, durable and safe pressure vessel; it can be installed in any position without being affected from outside; the solid protective shell will not leak or burst, and there is no danger of leakage to the environment.
Plates & Gaskets For Heat Exchanger 1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc. 2.Plates produced by precision molds and advanced press machine that detect & correct regularly. 3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality. Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L. Plates thickness: 0.5mm - 1.2mm Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock. *Other materials may be available on request.
Alfa Laval Plate Heat Exchanger Spare Parts: Alfa Laval A Series: Alfa Laval Nirex Series: Alfa Laval A10 Alfa Laval JWP16 Alfa Laval A10-BFD Alfa Laval JWP26 Alfa Laval A10-BFG Alfa Laval JWP36 Alfa Laval A15 Alfa Laval M Series: Alfa Laval A15-BFD Alfa Laval M3 Alfa Laval A15-BFG Alfa Laval M3-D Alfa Laval A15-BFL Alfa Laval M3-XVG Alfa Laval A15-BW Alfa Laval M3-VG Alfa Laval A20 Alfa Laval M6 Alfa Laval A20-BFG Alfa Laval M6-FD Alfa Laval 20-BFD Alfa Laval M6-FG Alfa Laval A20-BFL Alfa Laval M6-MD Alfa Laval A30 Alfa Laval M6-MFD Alfa Laval A35 Alfa Laval M6-MFG Alfa Laval A35-HA Alfa Laval M6-MW Alfa Laval A45-FG Alfa Laval M6-MWFD Alfa Laval ACE Alfa Laval M6-MX Alfa Laval AK20 Alfa Laval M10 Alfa Laval AK20-FD Alfa Laval M10-B Alfa Laval AK20-FG Alfa Laval M10-BD Alfa Laval AL35 Alfa Laval M10-BFD Alfa Laval AM10-FG Alfa Laval M10-BFG Alfa Laval AM10-FS Alfa Laval M10-BFM Alfa Laval AM20 Alfa Laval M10-DB Alfa Laval AM20-BFG Alfa Laval M10-M Alfa Laval AM20-DW Alfa Laval M10-MX Alfa Laval AM20-FG Alfa Laval M10-MFD Alfa Laval AM20-SF Alfa Laval M10-MFG Alfa Laval AM20-S/N Alfa Laval M10-MFM Alfa Laval AM20-WF Alfa Laval M15 Alfa Laval AX30 Alfa Laval M15-BD Alfa Laval AX30-BF Alfa Laval M15-BFD Alfa Laval AX30-BW Alfa Laval M15-BFG Alfa Laval AX35-FG Alfa Laval M15-BFS Alfa Laval M15-E Alfa Laval M15-F Alfa Laval M15-FFG Alfa Laval M15-M Alfa Laval M15-MFD Alfa Laval M15-MFG Alfa Laval M15-MFS Alfa Laval M20-MFG Alfa Laval M20-MFM Alfa Laval M20-MFD Alfa Laval M20-MWFG Alfa Laval M20-MWFD We do deal in following machine and its Spares: Alfa Laval : MAB 103,104,204,205,206,207. MIB 303. MMPX 303,304,403,404. MFPX 307. MSPX 303. MMB 203,304,305. MAPX 204,205,207,210,309,313. MOPX 205,207,209,306,308,309,310. WHPX 405,407,409,410,413,505,507,510,513. FOPX 605,607,609,610,613,614. LOPX 705,707,709,710,713. Also SU and PU Purifier and Spares. For Vegetable Oil : SRG 509,610,214. Westfalia: OSA-5,7,20,35. OSB- 20,30,35. OSC-4,5,7,15,18,20,25,30,50. OSD-6,10,18,35,50,60. OTA- 2,7,14,18. WSC- 5 Mitsubishi: SJ-10F,10G,10T. SJ-15T,15EH. SJ-20T,20EH. SJ-30G,30T,30P,30EH. SJ-40T,40P,40F,40EH. SJ-50G. SJ-80F SJ-700,2000,3000,4000,6000.
Model: 504 Width(mm): 200 Height(mm): 480 Length(min-max): 200-400 Horizontal port distance(mm): 70 Vertical port distance(mm): 381 Max. Working pressure(bar): 20 Test pressure(bar): 25 Weight(kg): 23+0.25n Connection diameter: 1 1/4” thread Width(mm): 200 Height(mm): 480 Length(min-max): 200-400
