Api 16A Drilling Annular Bop Suppliers and Manufacturers

1) drill pipe od: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) steel grade: e75, g105, s135 3) type of end finish: eu-external upset, ieu-internal & external upset 4) all drill rod are made according to api 5d standard 5) we can provide in many conditions, with or without hard banding (arnco100xt, arnco300xt, tungsten carbide etc). Marking, bundling; thread protecors installed on box and pin end

Drill pipe is made from alloy steel acc. to API Spec.5D. All threads are phosphate plated copper or cold worked. All connection are equipped with pressed steel thread protectors. All threads are machined with CNC Lathes-Double-shouldered and special threads. bundles ,All connections shall be equipped with pressed steel or plastic steel thread protectors.

Weigao offers a wide variety of drill collar sizes from 3 ¨û¡± - 9 ¨ö¡±, spiraled or slick, and with api connections. All our drill collars are tailored to your specific requirements. We supply slick, spiral, and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Weigao drill collar are high quality products which meet the hardest operating conditions. Each collar undergoes strict quality control, more than one hundred checks are made in the course of manufacturing. All mechanical properties meet or exceed the requirements of api spec.7-1 for drill collars. Weigao drill collars are made of aisi 4145 h modified alloy steel or non-magnetic material. Other grades are available on request. Weigao drill collars are used successfully for sour gas wells. After forging or rolling, the bars are peeled, heat treated, stress relieved, ultrasonically inspected and straightened to api specifications, to ensure that each bar will meet the physical properties. Bundles , all connections shall be equipped with pressed steel or plastic steel thread protectors.

Product Description; BOP parts: interchangeable 100% with original. BOP PART NAME: packing element, top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open. SUITABLE FOR BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP

Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.

Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.

1. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 2. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly

The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3 meter, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.

Product Description 1.competitive price and high quality 2. delivery timly and in stock 3.power:380v 50hz 4.Max.working pressure:34.5MPa(5000Psi ) The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D. Control System for Surface Mounted BOP Stack are from 2 to 14, being suitable for any difficult climate atmosphere. Technical parameter Main parameters as follows: 1.Environmental temperature:-13~40�°C 2, Power: 380v, 50Hz 3, Nominal pressure: 21MPa(3000Psi) 4.Max.working pressure:34.5MPa(5000Psi) 4, Pressure range: 0~14MPa(0~2000Psi) 5, Nitrogen charging pressure of accumulators: 7�±0.7MPa(1000±100Psi) 6, Air supply pressure: 0.65~0.8MPa(93~115Psi) 7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi) 8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)

Product Description BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.

Bop remote control system Bop remote control system is special equipment, which is used to control bop, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry. The function of the bop remote control system for surface mounted bop stacks is preparing and prestoring enough hydraulic oil and controlling its flow direction, in order to open or close bop quickly. As the hydraulic oil used, the pressure drops down, when the pressure lowers to a certain value, the bop remote constrol system will renew the hydraulic oil automatically, to keep the pressure in a certain high value.

Ram bop specifications 1) according to the number of ram installed in each set, ram bop can be divided into: single ram, double ram and three ram bop, which are respectively installed with one ram, two rams or three rams. 2) according to the ram opening and closing method, ram bop can be divided into manual locking and hydraulic locking. 3) according to the different opening and closing method of bonnet, ram bop can be divided into two forms: rotating bonnet ram bop and linear bonnet ram bop. For the rotating bonnet ram bop, when opening or closing bonnet, the bonnet rotates on the hinge sear fastened on the body, the ram cam cavity shape of such bop is rectangle. 4) for the linear bonnet ram bop, when opening or closing bonnet, the bonnet makes linear motion along the two bonnet opening and closing plunger rods fastened on the body, the ram cavity shape of such bop is elliptic.

China supplier model ddz center latch elevators are suitable for handling 18 degree taper shoulder drill pipe, drilling tools and etc. The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment. Model: dd, ddz, cd, cdz, Pipe size range: 2 3/8"-5 1/2" Load capacity: 100tons-350tons

Steel Body PDC Use high-quality steel to make the base material of PDC bit, the surface of the blade weld high-performance wear-resistant materials, the use of computer software for the overall design of three-dimensional PDC BIT, double asymmetric teeth straight blade, medium parabolic crown, long Gage shape structure. Cutting structure using force balance design, unique PDC cutter layout and positioning of the PDC bit to keep a sharp cutting edge in drilling, effectively improve the offensive PDC BIT and drilling speed. The application of fluid dynamics analysis and numerical simulation of hydraulic flow field analysis technology to design, help to improve chip speed drill and anti-balling capacity. Suitable for high compressive strength, with abrasive medium hard to hard formations, such as shale, limestone, anhydrite, sandstone and so on.

Specifications 1, api 16a ram bop 2, bore dia.: 7 1/16"-26 3/4" 3. Pressure: 14mpa to 105mpa 4. Forged and casting Ram blowout preventer Hydraulically/manual operated locking mechanism. Secondary seal. Flat and side door structure or hydraulic control type flat door structure. The side door and shell are connected by triple hinges. Open and close the valve in sequence by using pressure bar(c type ram bop) The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop) Pistons indicator. Concealed oil way. The cavity of ram is ellipse. Hydraulic pressure: 1200~1500psi(8.4~10.5mpa) Hydraulic connection: npt1 Working temperature: -29 Media: oil gas & drilling fluid containing h2s Ram size and type : series size pipe ram, reducing ram and cutter ram.

1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten

API 6A Standard spacer spool and drilling spool 1. Standard: API 2. Pressure:2000PSI-20000PSI 3. Size: 3 1/8"--26 3/4" Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face). We can produce all kinds of API 6A double studded adapter for wellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.

1. Drilling jar is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well. 2. The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately . 3. The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated . 4.The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be allowed after jar is put into downhole.

Longway has authorized by ISO 9001, NS-1 and Russia GOST RTN . it is able to process drilling tools according to standard DS-1 under a full system of production design and quality control.. our oil drill rod have been tested by the third party, such as China national petroleum pipe research insititue and Russia petroleum pipe quality control center, the quality is stable and reliable.