Find Verified 24Mm 24Byj Geared Stepper Motor Suppliers, Manufacturers and Wholesalers

Q2HB88M Features (1) High performance, low price (2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480 (3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge (4) Bipolar constant current chopping circuit (5) Opto-isolated input/output (6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase) (7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V) (8) Highest response frequency: 200Kpps (9) Over voltage protection, overheat protection, over current protection

Stepper motor drive -Bipolar Motor Drive -Microprocessor based Design -Operating Voltage up to 80V DC -Programmable Motor current up to 8A -Up to 64 Microsteps - Selectable through DIP Switch -Microstepping for Smooth Operation Carton Box

Byj series stepper motor Model 35BYJ46 Rated voltage 12VDC Number of Pole 4 Speed Variation Ratio 1/85.25 Stride Angle 7.5fp /85.25 DC resistance 130ohmf+7%(25k) Idle In-traction Frequency >500Hz Idle Out-traction Frequency >800Hz In-traction Torque >78.4mN.m(120Hz) Self-positioning Tor >39.2mN.m insulated resistance >10ohm(500V) insulated electricity power 600VAC/1mA/1s Insulation grade A Rise in Temperature

PHBX / TFX Geared Motor

PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.

Technical data: Voltage: Operating range (V): 6.0-12.0 Rated (V): 6.0 No-load: Speed (RPM): 23 Current (A): 0.025 Maximum efficiency: Speed (RPM): 18 Current (A): 0.099 Torque (kg/cm): 0.866 Output (W): 0.160 Efficiency (%): 27.0 Stall torque (kg/cm): 4.2

Gear motor

JR61-series Acshaded pole motor(Heat resistant type ó=) Applicationú¦electrical Oven /automatic Veding machine/popcorn-machina Valtage &Frequentcy :100~240V & 50~60Hz Abiment Temperature ú¦-15~120íµ Insulation class:A/E/B/F/H Model/codeStator dimension(mm)volt.VFreq.Hzrated speed(rpm)Max Torque(N.m)rated input/output power(W) JR61-1010.51206060í+20.4516/2.5 JR61-12122306060í+20.6520/3.5 JR61-2025.51206060í+21.6548/9.5 JR61-2525.51206060í+22.560/12.5 JR61-3030.51206060í+22.870/15.7. 36 or48pcs put in one carton with the foam pre /per set parking in a plastic bag.

TR - Inline Helical Geared Motor have a one-piece (monoblock) housing, which has advantages in terms of rigidity, oil leakage, noise level and gear strength. The high gear quality achieved with modern manufacturing technologies is supplemented with housings made of GG20-22 material. TR - Inline Helical Geared Motor are easy to mount and flexible in usage. Depending on customer requirements direct or IEC B5 or B14 motor connections are available. All models are foot-mounted and have two or three stages in a single housing

Good quality and less price 12mmw.55l

Product model: 17HS3401S-PGXXX Stepper motor length: 34 mm Shaft size: "D" shaft 16x8mm Motor lead: plug Including connection: 1M double dot line Gear reducer ratio Gearbox model: 3.71-1 5.18-1 14-1 19-1 27-1 51-1 Decrease: 3.71 5.18 14 19 27 51 Transmission length: 29 29 37 37 37 45

- High Torque Density - High torque to inertia for quicker start and atops. - Ruged design and long life bearing. - Holding torque up to 300 kg-cm. - Smallest frame size. Applications Printing Machines Coding, Marking Machines Packaging Machines CNC Machines Labelling Machines Diamond Machines SPM also. As per motors specification sheet.

The various types are Nema23 stepper motor, nema24 stepper motor, servo motor, nema17 stepper motor. Application in lane diverters, elevators, and conveyor belts

These motors are produced from 0.5 HP to 20.0 HP and speed ranging from 1.5 RPM to 450 RPM. They are designed for continuous duty under ardaous operating conditions.These can be supplied as gear units also, where the flange mounted motors procured by customers can be fitted. We also supply inline gearbox with input shaft to which the customer can connect a standard foot mounted electric motor.

NEMA 34 CAN Closeloop 10N.m Integrated Stepper Motor Our drivers and controllers can be installed on the rear cover of NEMA17/NEMA23, It will simplify the design of integrated stepper motor. User can install the encoder to achieve open-loop control. The process of assembly is simple and flexible. It just require few connecting lines, and more space is saved. It is easy to distribute control and remote monitoring for users. As shown in the following figure, PMC006B4 controller is installed on the rear cover of NEMA17. The noise and vibration under low speed is slight. Stepper motor + PMC007C6SE driving controller + encoder Compact structure, saving complicated wiring, saving space High-precision, close-loop control with encoder Accurate positioning, recording step position, without losing step Easy to install, easy to distributed control, support a variety of control metho

We are a manufacturer and can manufacture products according to our customer's design. Currently we are looking for qualified stocking distributors with competitive price and good discount in the world for mutually beneficial long-term relationship. We try our best to support our distributors and business partners to develop more market percentage. Please join us, let's create the glorious future together!