The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed.Process. lt can combine two polarization state into one single mode fiber or split single mode into.Two vertical polarization states.Mostly used in Raman Amplifier,combine two vertical polar states.To get a double power light
Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from �5% to �0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses. Fused Type PM Fiber Standard Coupler Features Applications High Power Handling Coherent Communication Low Insertion Loss Power Monitor High Stability & Reliability Fiber Sensor Specifications Parameter Value Grade P A P A P A Center Wavelength 1310, 1550 980, 1030, 1040, 1064 780, 850nm Operating Bandwidth ±15nm Max. Excess Loss 0.7dB 0.8dB 0.4dB 0.6dB 0.6dB 0.8dB Min. Extinction Ratio 20dB 18dB 20dB 18dB 20dB 18dB Min. Directivity 50dB Max. Return Loss 55dB Max. Optical Power(CW) 3W Fiber Type PM Panda Fiber Package Dimension Ï?3*54mm(bare fiber,0.9mm loose tube), 90*20*10(0.9mm/2.0mm/3.0mm loose tube) Operating Temperature -5~+75 Storage Temperature -40~+85 Splitting Ratio Tolerance Grade P Grade A Splitting Ratio 50/50 % ±4.8 ±7.0 40/60 % ±3.9 ±5.5 30/70 % ±2.5 ±4.0 20/80 % ±2.3 ±3.1 10/90 % ±2.1 ±2.6 5/95 % ±1.4 ±1.5 1/99 % ±0.5 ±0.6 Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. PM Isolator (1310nm,1550nm) Features Applications Low Insertion Loss Communication Systems High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Isolation Research High Stability & Reliability Specifications Parameter Value Stage Single Dual Grade P A P A Center Wavelength 1310 or 1550nm Operating Wavelength Range ±20nm Typ. Peak Isolation at 2342dB 40dB 58dB 55dB Min. Isolation at 23 28dB 26dB 48dB 45dB Typ. Insertion Loss at 23 0.4dB 0.5dB 0.5dB 0.6dB Max. Insertion Loss at 230.55dB 0.65dB 0.65dB 0.8dB Min. Extinction Ratio at 2320dB 18dB 20dB 18dB(only for Both Axis Working) Min. Extinction Ratio at 2325dB 23dB 25dB 23dB(only for Fast Axis Blocked) Min. Return Loss (input/output) 50/50dB Max. Optical Power(CW) 500mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output, while blocking the reversed direction. PM Isolator (1064nm) Features Applications Low Insertion Loss Communication Systems High Return Loss Test Instruments High Extinction Ratio Fiber Sensor High Isolation Research High Stability & Reliability Specifications Parameter Value Stage Single Dual Grade P A P A Center Wavelength 1064nm Operating Wavelength Range ±5nm Typ. Peak Isolation 40dB 38dB 55dB 52dB Min. Isolation at 23 32dB 28dB 45dB 42dB Typ. Insertion Loss at 23 1.5dB 1.6dB 2.4dB 2.6dB Max. Insertion Loss at 231.8dB 2.2dB 3.2dB 3.4dB Min. Return Loss (input/output)50/50dB 50/50dB 50/50dB 50/50dB Min. Extinction Ratio at 23(only for B type) 20dB 18dB 20dB 18dB Min. Extinction Ratio at 23(only for F type) 22dB 20dB 22dB 20dB Max. Optical Power(CW) 300mW Max. Tensile Load 5N Fiber Type PM Panda fiber Operating Temperature -5~+50 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's bandpass filter device is designed to transmit the light of narrow bandwidth, blocking the others. BPF is applied in a fiber laser. High Power Optical Bandpass Filter Features Applications Low Insertion Loss Fiber Laser High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Reliability & Stability EDFA Specifications Parameter Value Center Wavelength 976, 1030, 1064, 1550nm Min. Pass Band Width (@-0.5dB) nm As Customized Max. Stop Bandwidth (@-25dB) nm As Customized Max. Insertion Loss of Passband 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return loss 50dB Max. Power Handling (CW) 20W or Specified Max. Peak Power for ns Pulse 10kW or Specified Max. Tensile Load 5N Operating Temperature 0 ~ +65 Storage Temperature -40 ~ +85 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction; RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. High Power Optical Isolator (1310nm,1550nm, Faraday Based) Features Applications Low Insertion Loss Communication Systems High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Isolation Research High Stability & Reliability Specifications Parameter Value Stage Single Dual Grade P A P A Center Wavelength 1310 or 1550nm Operating Wavelength Range ±20nm Typ. Peak Isolation at 2342dB 40dB 58dB 55dB Min. Isolation at 23 28dB 26dB 48dB 45dB Typ. Insertion Loss at 230.4dB 0.5dB 0.5dB 0.6dB Max. Insertion Loss at 230.55dB 0.65dB 0.65dB 0.8dB Min. Extinction Ratio at 2320dB 18dB 20dB 18dB(only for Both Axis Working) Min. Extinction Ratio at 2325dB 23dB 25dB 23dB(only for Fast Axis Blocked) Max. Polarization Dependent Los 0.15dB Min. Return Loss (input/output) 50/50dB Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 With connectors, the handling power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
High Quality and Cost-effective 62.5/125um Multimode Fiber Patch Cable The 62.5/125um multimode fiber patch cable meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. Why choose us? 1. Sophenol's fiber optic patch cords include differen terminations like LC, SC/APC, ST, E2000/APC, MU, VF45, FC, MTRJ, SC, MPO, MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon, FDDI, etc. 2. Fiber optic patch cords are available for simplex, duplex and multicore with single mode 9/125 or multimode 50/125, 62.5/125, etc. 3. Various kinds of cable materials, PVC, Riser, Plenum, OFNR, OFNP, LSZH (LSOH), 10 Gig Aqua. 4. There are assemblies for simplex fiber optic patch cords, duplex fiber optic patch cords, multi fiber optic patch cords, and also ribbon fan out fiber optic patch cords and bundle fiber optic patch cords. 5. Typical fiber optic patch cords cable diameter can be 0.9mm, 2mm,or 3mm.?Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. 6. High Quality and Cost-effective 9/125um Singlemode Fiber Patch Cable The 9/125um single mode fiber patch cable meets RoHS compliant. 7. All cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. Quality Standard: ·Fire retardant conformity with IEC 60332-3C standard ·No corrosive gas emissions IEC 60754-2 standard ·Low smoke zero halogen emissions with IEC 61034-2 standard ·Use international standard LC, SC, ST, FC connectors, support simplex or duplex Features: ·100% pre-terminated and optically tested in factory to ensure transfer performance ·Meets or exceeds industry standards for return loss and insertion loss ·Manufactured using advanced automated assembly and polishing techniques ·Segmented boot for bend strain relief ·Use standard LC, SC, ST, FC connectors, support simplex or duplex ·Customized OEM products available Custom Assembly: ·LC, SC, ST, FC, MTRJ, and other customize connectors available upon request ·PC, UPC, APC polishings available upon request ·0.99mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm diameters also available upon request ·Yellow, Orange, aquamarine, violet or customized color jackets and boots available ·Length and fibers according to request, and Pigtail available ·Simplex, duplex, uniboot, zipcord jacket, or armoured cable, etc. all available Item Details ·Connector: MTRJ to MTRJ ·Fiber Mode: 62.5/125um ·Jacket Color: Orange ·Jacket OD: 2.0/0.9/3.0mm ·Fiber Count: Simplex (1-fiber) and Duplex (2-fiber) ·Material: PVC/LSZH/OFNP ·Operating temperature: -20~75°C ·Storage temperature: -40~85°C
Sophenol fiber Optic Patch Pigtail 12 cores Fiber Optic Patch pigtail cableare with premium grade connectors and with typical 0.9 mm outer diameter cables. Simplex fiber pigtials and duplex fiber pigtails are available, with different cable color, cable diameter and jacket types optional. The most common is known as the fusion splice on pigtail , and the 12 fibers or 6 fibers multi color pigtail are easy to install and provide a premium quality fiber optic connection . We also offer individual single pigtails , discounted 6 packs , or 12 packs . also are 12 fiber or 6 fiber jacketed pigtails . In this 12-pack, 12 strands of fiber are terminated on one end with LC or SC, ST, FC connectors. Connectors are ceramic with Ultra PC (UPC) finish. Features: ·Low insertion loss and back reflection loss. ·Good exchangeability. ·Good durability. ·High temperature stability. ·Available in 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers etc. ·Meets ISO9001, ROHS and Bell core GR 326-core standards ·Compliant to IEC, TIA/EIA, NTT and JIS specifications Advantage : ·UL certificate makes the quality leve be the best. ·Warranty is lifetime. ·100% pass testing to assure a satisfactory performance. ·No any defectives or scratches on the ferrule surface. ·If there is any quality problem, we will make replacement immediately by free.
Mode conditioning fiber optic patch cables are used specifically in Gigabit Ethernet 1000BASE-LX/LH applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device. Features: Compliant with IEEE 802.3z To replace the standard equipment-to-cable plant patch cable Rugged Offset Closure with Consistent Offset Applications: To replace the standard equipment-to-cable plant patch cable Gigabit Ethernet 1000Base-LX (1300nm wavelength) LX Gigabit Systems Why to choose our fiber optic jumper ? ·We choose good quality material to assembly jumpers ·Our skilled artistry ensure good quality and durability Fast delivery ·100% functionally tested prior to shipment ·Small orders acceptable and regular stock to ensure you do not miss any deal ·Warranty 3years
Fiber Loop back is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem. Sophenol's SC Loopback Module provides a return signal for fiber optic equipment which can be using for testing purposes and isolating any network issues. Item Details: Connector Types Mode: Singlemode Fiber Mode: 9/125um Jacket Type: PVC Durability: Over 500 cycles (=0.2dB) Reflectance: Min. 20dB Applications : CATV, metro Test equipment Telecommunication networks Local area networks (LAN) Wide area networks (WAN) Premise installations Data processing networks Video and military active device termination Packing information : 200pcs put into a carton, the weight is 10kg, the carton size is 38x38x28cm.
Sophenol singlemode 9/125m fiber patch cable using impotred high technical polishing machines for low-less connections,and all cables are 100% optically tested for insertion loss. Item Details: Connector: LC to LC Jacket OD: standard 2.0/0.9/3.0mm Fiber Mode: 9/125m Jacket Color: Yellow Fiber Type: Duplex Jacket Material: PVC/LSZH/OFNP Applications: Date centre Telecommunication networks CATV LAN and WAN FTTX Broadband network EACH CABLE PACKED IN A ZIP-LOCK POLYBAG HOT-SEALED POLYBAG, TEST DATA KEEP IN BAG
Polarization maintaining optical circulators for fiber optic applications. A first embodiment uses birefringent wedges and Faraday rotators in an inline configuration. The second embodiment utilizes a polarizing beam splitting cube and
Fiber optic PLC splitter, WDM/CWDM/FWDM/DWDM, Fiber Optic patch cords, SC quick connector.
Detailed Product Description WavelengthRang: 1525~1565 Insertion Loss: 1.0(Typ.); 1.3(Max.) Return Loss: 30 Crosstalk: 30 Switching Speed: Regular (200~400); Ultra-fast (10~30) Repeatability: +/- 0.01 Features 1 No moving parts 2 Switching speed is fast 3 extremely stable latch mode 4 Low power consumption 5 Excellent stability and reliability Application High speed protection System monitoring test measurement Fiber sensing system Product Description The 1x2 or 2x1 optical switch is a solid-state optical switch that does not have any moving components inside and is based on the Faraday effect. The series uses the principle of electromagnetic induction and the Faraday rotation effect to change the polarization state of the incident beam. In combination with the birefringent polarization beam splitting crystal, the beam propagation path is changed, thereby realizing the function of optical path switching.
Electrical contactors, relays, switches, fuses, junction boxes, industrial power cables.
Fiber properties: 1.International standard SMA-905 connector Quick and convenient connection with SMA-905 international standard interface. 2.Good quality, reasonable price Medfibers provides laser optical fiber transmission products for famous medical laser manufacturers all over the world. 3.Professional sterilized package Our fibers go through strict sterilization steps. It can be used directly. 4.Applicable to a variety of wavelengths Our fibers can transmit 810nm, 940nm, 980nm, 1064nm, 1470nm, 1900nm, 2100nm and other more. Our fiber is hard to break and wears a firm coating to protect from breaking when using.
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
Ruik's polarization-maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output while blocking the reversed direction. High Power Optical Isolator (TGG Based) Features Applications Low Insertion Loss PM Fiber Amplifier High Return Loss Testing Instrument High Isolation Mopa Fiber Laser High stability & Reliability Fiber Laser Specifications Parameters Value Center Wavelength 1064 or 1030 or 980 or 915 or 850 or 780nm Operating Wavelength Range ±5nm Typ. Peak Isolation at 23 30dB Min. Isolation at 23 25dB Typ. Insertion Loss at 23 0.8dB Max. Insertion Loss at 23 1.0dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return Loss(Input /Output) 45dB Max. Average Optical Power 10W or Specified Max. Peak Power for ns Pulse 10kWor Specified Max. Tensile Load 5N Package Dimension 58x28x26mm Operating Temperature +10~+50 Storage Temperature 0~+60 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Specifications: 1.19”x1.75”(1U) / 3.5”(2U) 2.12/16/24/32/48 Ports available 3.Meet ANSI/TIA/EIA 568B.2, ISO/IEC 11801&EN50173 4.24 or 48 x Unshielded RJ45 Jacks 5.Jack: RJ45 8P8C 3-50 micro inches gold plating over nickel plated on contact area 6.IDC:PC UL94V-0, white color . 110/Krone/110&Krone Dual Use IDC available 7.Accept 22-26AWG solid wire 8.Support T568A&T568B wiring guidelines 9.19” metal plate housing, black color painting 10.With support hole for cable ties Features: 1.Surface Finish: The degreasing, pickling, Phosphoric, powder coated 2.Suitable for cat5e,cat,cat6a keystone jack panel 3.Material: SPCC cold rolling steel, Material thickness 1.2mm 4.Color: RAL9004/RAL7044 5.Loading capacity: 60kg 6.Parameter: 0-50degree 220V AC/115V AC Why you choose Sophenol be one of your partner? 01. Professional manufacturer, 100% tested, free samples are available. 02. OEM service with 12-year experiences, manufacture as per your request. 03. Standard stock, fast turnarounds. 04. Customers solutions in days, not weeks. 05. Warmly services with careful attentions. 06. Can provide your specific inquiry within 24 hours. 07. Save much costs, bring more benifits for customer to expand business.
