Self Priming Coolant Pump
Self Priming Monoblock Pumps
Fzb series fluorine plastic linning self-priming pump Patent product, base on ihf centrifugal pump structure, installed the double volute self-priming pump casing on ihf pump, simple structure and for widely usage. Corrosion and pressure resistance, wet parts are made of corrosion resistant fluoroplastic, with these advantages, fzb pumps available to high corrosive applications. Pump base plate is made of metal; make the pump available to high pressure resistance applications. Easy for operating Developed for low sump application, pump installed above the sump or tank, which easy for operating, maintenance and repair. Min model no 25fzb 18l pumping flow capacity 3.6 m3/h, 18 meter pump head , equipped with motor power 2.2kw Max model no 100fzb 30l pumping flow capacity 100 m3/h , 30 meter pump head, equipped with motor power 18.5kw Model no 50fzb -30l 50 pump inlet diameter are 50mm Fzb single stage end-suction centrifugal pump 30 pump head 30 meter L pump connection by coupling Pump flow capacity 12 m3/h Motor 4kw Self-priming height 3 meter . Medium Acids & lyes Waste water Chlorine water Electrolyte Application Chemical industry Pesticide Acid and alkali making Papermaking Acid pickle process Electronics industry
Self Priming Pumps (Super Suction Type) Available in 0.5 H.P. & 1 H.P., Head: Up To 50 mtrs, Discharge: Up To 3000 lph, Supply: 1-Phase, Delivery Size : 1 X 1, Winding : Copper (E.C.Grade), Impeller: Brass, Motor Body: Aluminium / Cast Iron, Available With Thermal Over Load Protector (T.O.P.).
Iodophor Ingredients: Iodine, dimethyl dodecyl amine oxide, quaternary ammonium salt, non-ionic surfactant, etc. Raw Material Assay: Iodine 5% The common name of the preparations: Iodine trioxide Administration & Dosage of the Preparations: Iodine 3%. Characterization Appearance and usage Reddish brown sticky liquid; its aqueous solution is acidic, foams produce when shaken. It is easily soluble in water or ethanol. It can be dissociated into cationic active species with reactive oxygen and active iodine in the aqueous solution, which has cleaning function. Pharmacological effects It is the complex compound of four alkyl amine reactive oxygen species and iodine, added the special synergist. It is stable and has no impurity. Precautions The preparations wrappers: should be fitted with brand new dark PET/HDPE with plastic inner lid. The Process of making preparations: when you fill the dilution into the container, the foam will be produced. Therefore, the self-priming filling machine is not appropriate. Please be attention the requirement of the preparation's pH value. The requirement of water quality: deionized water would be best. Don't make it with the high hardness tap-water and alkaline water.
Detailed product description Model: qjx series Flow rate: 80-600 m3/h (22.2-166.7l/s) Head: 20 to 210 m (65.6 to 688.9 feet) Max. Rotate speed: 3000 r/min Pump outlet dia.: 360mm, 450mm, 505mm Ph value: 6.5-8.5 Operating limits: 1, maximum ambient temperature: 20 deg c 2, maximum immerging depth for the first stage: 500mm (19.7 inch) 3, maximum hydrogen sulfide component: 1.5mg/l 4, maximum chloride ion: 400mg/l. Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 220kw Materials: cast iron, stainless steel Application: * applied to getting water from the river and lake, water supply and drainage for mine, the foundation and In wooden box or as your request.
0.5 hp regular-30m head-2.6amps-2000lph per hour at 18m. 10kgs
Zcq series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and teflon etc material to insure the good anticorrosion performance Plywood case
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Capacitor inside/outside the terminal box Insulation class b Protection ip 51
Self-priming pump KD series Motor Model:KD-Self-priming pump Materical:PP Power:10hp Pole:2P Primary ring:Silicon Mating ring:Ceramic Rubber:EPDM Spring:SUS316 Frequency:50HZ Caliber:3"X3" Max.capacity:1133l/min Max.head:23.5m Weight:140.0kg
Self-priming pump CBH-80 and its units (hereinafter referred to as pumps or units) are designed to pump liquids without mechanical impurities. Pump CBH-80 is designed to pump the following liquids: water, gasoline, kerosene, diesel fuel and other liquids with a viscosity of not more than 2 10-6m2/s at a temperature from -40 to +50 and a density of not more than 1000 kg/m3. Symbol of a pump or electric pump unit: C self-priming H-pump 80- DN inlet and outlet pipe, mm Specifications of Pump CBH-80 The main technical characteristics of the pump are shown in Fig . 1 and in Table 1 at testing it on water at a temperature of 20 C and a rotational speed of 1450 rpm.
Self priming series garden water pump JET Series pump is a jet pump or a full lift self-priming pump which is consisted of centrifugal pump and jet nozzle. These series pumps possess certain flow quantity, higher head. It could lift the water to 9 meters of vacuum height.This series is suitable for using on water withdraw of household, water supply of high building, irrigation of garden and farm, etc. Product Feature: -Power:0.5HP,0.75HP,1HP -Impellor : Brass -Casting iron pump body -PPO diffusor -Aluminum motor housing -Insulation class B -protection IP 44 -stailess steel shaft &good quality bearing -Full copper wire coil
JET-M SERIES SELF-PRIMING PUMP JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure. Working conditions Max Temperature of Fluid up to+40 Max pressure:8bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde. Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
Self-priming jet water pump (jsw) Structural characteristics**** A. Pump body: cast iron, with uni iso 228/1 gas threaded suction and delivery openings. B. Motor bracket: aluminum motor bracket, reducing difficulties when starting the pump after long periods without use, due to the impeller blocking. C. Ejector union: approved for drinking water. D. Impeller: brass with centrifugal radial flow type E. Motor shaft: anti-rust motor shaft F. Mechanical seal: ceramic and graphite. G. Motor: the pumps are coupled to an asynchronous, high efficiency toyoo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty. Insulation class b. The thermal cutout relay motor protector is incorporated in single phase motors. Three phase motors require an adequate external motor protector, with connections according to current standards. H. Protection: ip 44.
Structural characteristics Unique motor design (permanent split capacitor type) Gun metal impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Glass fill nylon nozzle and venturi Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
Non self-priming pump NAS series Motor Model:NAS-Non self-priming pump Materical:PP Power:10hp Pole:2P Primary ring:Silicon Mating ring:Ceramic Rubber:EPDM Spring:SUS316 Frequency:50HZ Caliber:3"X2.5" Max.capacity:1333l/min Max.head:38.0m Weight:98.0kg
Non self-priming pump NAG series Motor Model:NAG-Non self-priming pump Materical:PP Power:5hp Pole:2P Primary ring:Silicon Mating ring:Ceramic Rubber:EPDM Spring:SUS316 Frequency:50HZ Caliber:2.5"X2" Max.capacity:800l/min Max.head:23.0m Weight:42.0kg
Non self-priming pump NAG series Motor Model:NAG-Non self-priming pump Materical:PP Power:15hp Pole:2P Primary ring:Silicon Mating ring:Ceramic Rubber:EPDM Spring:SUS316 Frequency:50HZ Caliber:4"X4" Max.capacity:1883l/min Max.head:30.5m Weight:115.0kg
Magnetic self-priming pump MVKD series Motor Model:MVKD-Magnetic self-priming pump Materical:PP Power:5hp Pole:2P Bearing:Silicon Spindle:Ceramic Rubber:EPDM Frequency:50HZ Caliber:2"X2" Max.capacity:485l/min Max.head:25.0m Weight:71.0kg
180W, 1" outlet diameter, Max. flow with 133 l/min, Max. head with 7m, Max. diameter of particle with 15mm, Max. submersible depth with 5m, Maxi. fluid temperature with 40 liquid PH valve: 4-10, Class B, IPX8, 18.5*18*36.5cm for each piece and each carton, G.W. is 9kgs
