Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Chemical formula C4H6O5 C.A.S number 004-525-33-1 Formula weight 134.09 Appearance Colourless liquid Assay Not less than 99.8% Density 1.25g/cm3(20C/68F) Application Using for the different beverages: flavored water energy drinks tea drinks juice till 100% Mechanism of efficiency of DMDC DMDC can permeate through the cell membrane, and block the metabolism through reacting with the enzymes of microorganism, then achieve the purpose of sterilization. Even in very low additive amount, DMDC can effectively kill typical spoilage bacteria in beverage, and not affect the taste, flavor and color of the beverage. Furthermore, it could be rapidly and completely hydrolyzed to carbon dioxide and methanol, which are the natural ingredients of juice. Package Gauga: 4KG/20KG Storage conditions In optimal storage conditions (storage temperature: 20C-30C), the storage period is one year
Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard: Â Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Specification: Carbon (C): 10.0% max; Moisture: 2.9% max; Loss on ignition: 13.4% max; Iron oxide (FeO3): 0.4%; Calcium oxide (CaO): 0.6%; Sodium oxide (Na2O): 0.2%; Potassium oxide (K2O): 3.5%; Sulfur trioxide (SO3): 0.8%; Silicon dioxide (SiO2): 70.2%; Aluminum oxide (Al2O3): 0.1%; Magnesium oxide (MgO): 0.4%; Appearance density after compaction: 0.24%.
Export of coconut based products 1. granular coconut shell charcoal mesh size 2 * 8, 3 * 6 , 4 * 8 , 8 * 20 2. granular activated carbon for water purification and gold mining 4 * 8 / 8 * 16 / 6 * 12 / 8 * 30 / 12 * 40 / 30 * 60 3. coconut coir products, cocopeat block, coco husk chip blocks, grow bags 4. coconut keel 5. coconut expeller cake 6. coconut shell peices , coconut shell handicrafts.Exporter
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
We deals in the following Chemicals :- Calcium Carbonate Powder Alumina Silica ( Cenosphere ) Powder Fly Ash Powder Ilmenite (Synthetic Rutile) Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Barite Powder, Barite Ore Dolomite Powder Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container
Cashew kernel, cashew husk, cashew shell cake/cashew nut shell oil, cardanol,o p c 53 grade( ordinary Portland cement), ammonium nitrate, potassium nitrate, potassium chloride, hexamine, chemicals, gypsum , o p c clinker, semi husked coconut.
This product uses high quality apricot shell, hickory shell as raw material, using excellent technology for carbonization, activation, refined processing. This product is black unshaped particles, with developed pore gap structure, has a good purification of drinking water efficiency, can remove the water odor, odor, chlorine, phenol, mercury, lead, arsenic, cyanide and other harmful substances, is to fill families, social groups, hotels and advanced purification water production equipment thinking material.
Product name: Coconut Peat Brand name: 99 Gold Data Block size: 30 x 30 x 15 cm Weight: 5 kgs (+/- 3%) pH: 5.8 to 6.8 Compression Ratio: Over 75 Liters / Block Moisture: 15 â?? 20% max Electric Conductivity (E.C): o High EC (Animal Bedding): 3.5 - 5 mS/cm. o Low EC (For Plant Growth) < 0.5 mS/cm. Impurities/sand: 3% max Fiber length: Less than 2cm Price: Negotiation Packing: In PP bag 20kgs, or 5kg/block, 192 blocks/pallet, 24 pallets/40ft (23 MTs) Payment method: T/T 40 in advance, 60% on scan bill, L/C at sight 100% Delivery time: 10 - 20 days
Anode grade green petroleum coke, calcined petcoke coke gor aluminium smelter, solid coal tar pitch, smelter grade alumina, aluminium fluoride, synthetic cryolite , silicon metal magnesium ingots carbon cathode blocks cold ramming paste, iron ore hematite, iron ore magnetite, steel billets, graphite electodes, electodes paste semi coke, ferro chrome, ferro silicon, ferro manganese calcium carbide, fluorspa, limestone quick lime hydrated lime gypsum silica sand talc steel blooms (collector bar) cement clinker palm oil sunflower oil corn oil soybean oil soya fatty acids oil sesame oil electrical calcined anthracite (eca) steam coal fuel grade petcoke.
Moisture : 8.5% max. Impurities : 1% max. Size (kernels/100 gr): o 180-200/ o 200-220/ o 220-240/ Broken beans: 3% max. Crop: newest, Origin: Vietnam. Packed in 25/50 kg PP Bag or Jute Bag. 18 MT/ 20'ft. Price: please contact for updated price. Payment & delivery: L/C at sight or T/T 30% in advance. Lead time: 2 weeks/ 1*20'FCL.