Specification :1.0mm, 2.0mm, 3.2mm, 4.2mm, 5.2mm, 6.2mm Brand :TC4/GR5, TC4ELI/GR5ELI, TA3/GR3 Treatment: nondestructive testing, leveling and finishing to finished plate. Physical properties: the tensile strength of TC4 medical titanium alloy plate is 980-1020mpa, the yield value is 950-1000mpa, the elongation after fracture is 20%, and the high-fold structure is a1-a5. TC4/GR5 titanium alloy composition: Nominal chemical composition (ti-6al-4v) Ti Al (5.5 6.7); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.05; H: 0.01; O: 0.2 Nominal chemical composition (ti-6al-4v) ELI Ti Al (5.5 6.5); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.03; H: 0.01; O: 0.13
There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1
Cdm titanium plate/sheet/coil/foil 1.Titanium plate/sheet Thickness:0.5mm-150mm maximun width:2500mm maximum length:12000mm Ams 4911:gr5(t-i-6al-4v)for aerospace ams4916:ti-811, ti-15333 for military Astm b265, asme sb265:gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17 for industrial 2.Titanium coil Astm b265, asme sb265:gr1, gr2 for industrial use Astm f67:gr1, gr2, etc.For medical astm f136 gr5(ti-6al-4v) for medical use Thickness:0.5mm-3.0mm maximum width:1250mm lenghth as per specific request S Plywood outside, plastic film in side;or as per request
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
Product Introduction A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are commonly used in a variety of applications, includingbiomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. Parameters Material: titanium sponge Porosity: 35% Filtration rate: 0.22mm- 100mm Thickness: above 1mm Size: square round and customized with the drawing How is the porosity of the plate controlled during manufacturing The porosity of aporous titaniumplate can be controlled during the manufacturing process. In the powder sintering process,titanium powderis compressed and heated to a temperature just below the melting point of titanium. The powder particles then fuse together to form a solid plate with a controlled porosity. The porosity of the plate can be controlled by adjusting the size and shape of the powder particles, the temperature and pressure of thesintering process, and the amount of binder material used.
Product Introduction Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1 3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories.
Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plate can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.
Product Name: ASTM F136 Titanium Plate Brief product introdution:Medical titanium plate is a kind of plate that provides medical titanium raw materials for domestic and foreign orthopedic implant companies, such as bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. Executive standard: ASTM B265 ASTM F136 ASTM F67 Product material: GR1, GR2, GR5, GR7, GR9, GR12, GR16, Ti15333, etc. Product Specifications: T0.5-1.0mm x W1m x L2-4m T1.0-5.0mm x W1-1.5m x L2-3.5m T5.0-30mm x W1-2.5m x L3m T30-80mm x W1m x L2m Product surface: Black leather surface, bright surface, pickling surface Delivery status: Hot rolled, cold rolled, annealed Product use: Electroplating industry, glasses industry, titanium equipment industry, watches, accessories, electronics, chemical industry and other industries Product features: acid and alkali resistance, corrosion resistance, wear resistance, high temperature resistance, low temperature resistance, light weight and high strength, non-magnetic, non-toxic The characteristics of medical titanium plates produce medical titanium rods, plates, pipes, wires and other products, and provide medical titanium raw materials for domestic and foreign orthopaedic implant companies, namely bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. The products strictly follow the national standards for medical implanted devices. The characteristics of medical titanium plates are several hundred degrees higher than that of aluminum alloys. They can still maintain the required strength at moderate temperatures, and can work for a long time at a temperature of 450 to 500 �°C. These two types of titanium alloys are at 150 �°C to 500 �°C. There is still a high specific strength in the range of â??, while the specific strength of aluminum alloy decreases significantly at 150 â??. The working temperature of titanium alloy can reach 500 â??, and the working temperature of aluminum alloy is below 200 â??. Titanium alloy has good corrosion resistance The characteristics of medical titanium plate titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than that of stainless steel; its resistance to pitting corrosion, acid corrosion and stress corrosion is particularly strong; it is resistant to alkali, chloride, Chlorine organic substances, nitric acid, sulfuric acid, etc. It has excellent corrosion resistance. However, titanium has poor corrosion resistance to media with reducing oxygen and chromium salts.
Titanium sheet dimension Sheet thickness(mm):0.3~4.0 Sheet width (mm): up to 1350 Sheet length(mm): up to 3000 Plate thickness(mm):4.1~35.0 Plate width(mm):up to 2000 Plate length(mm): up to 6000 Coiled sheet thickness(mm):0.2~2.0 Coiled sheet width (mm):800~1520 Coiled sheet length(mm): 3 ~ 6 tons per coil Coiled plate thickness (mm): 2.1~16.0 Coiled plate width(mm): 800 ~ 1550 Coiled plate length(mm): 3 ~ 6 tons per coil Titanium flat or slab are available by shearing, edm or water-jet cutting.
Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Parameters Material: titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm DI: 1MM above Features 1.High Strength-to-Weight Ratio. 2.Corrosion Resistance. 3.Biocompatibility. 4.Customizable Pore Size and Distribution. 5.High Temperature Resistance. Application Chemical Industry: Sintered porous titanium plates are used in chemical processing equipment, such as filters and catalysts, due to their resistance to corrosion and customizable pore size. Medical Industry: Sintered porous titanium plates are used in medical implants and prosthetics such as bone substitutes and dental implants� due to their biocompatibility, strength, and durability. Energy Industry: Sintered porous titanium plates are used in fuel cells and batteries due to their high strength-to-weight ratio and ability to conduct electricity. Environmental Industry: Sintered porous titanium plates are used in water treatment systems and air filters due to their customizable pore size and distribution and resistance to corrosion. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then mold pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are commonly used in a variety of applications, including biomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. Parameters Material: titanium sponge Porosity: 35% Filtration rate: 0.22mm- 100mm Thickness: above 1mm Size: square round and customized with the drawing Features Versatile pore structure: The pore structure of porous sintered titanium plates can be varied to achieve different properties. For example, plates with a larger pore size may have a higher permeability, while plates with a smaller pore size may have a higher particle retention. Customized shape and size: Porous sintered titanium plates can be manufactured in a variety of shapes and sizes to suit specific application requirements. This allows for customized designs that can optimize performance and minimize material waste. Environmental sustainability: Porous sintered titanium plates can be recycled and reused, making them an environmentally sustainable choice. Additionally, the manufacturing process can be optimized to minimize waste and energy consumption. Applications in energy production: Porous sintered titanium plates can be used in energy production applications such as fuel cells and batteries. The high surface area-to-volume ratio of the plates allows for efficient gas exchange and can enhance the performance of these devices. Applications Porous titanium plates are commonly used in a variety of applications, including biomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. In biomedical applications, porous titanium plates are often used as bone implants or scaffolds to promote bone regeneration. The porous structure of the plate allows for the growth of new bone tissue into the implant, which can help to repair or replace damaged bones. In filtration systems, porous titanium plates can be used as a high-performance filter media due to their ability to trap and remove small particles and impurities from fluids. In biomedical applications, porous titanium plates are often used as bone implants or scaffolds to promote bone regeneration. The porous structure of the plate allows for the growth of new bone tissue into the implant, which can help to repair or replace damaged bones.
Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. Applications 1. Used as a filter; 2. Utilize the function of its pores to manufacture porous electrodes, fire extinguishing devices, antifreeze devices, high temperature resistant nozzles, etc. Porous electrodes are mainly used in electrochemistry. The fire extinguishing device uses its anti-flow effect to prevent explosions, such as flame explosion arresters for gas welding. The antifreeze device utilizes its holes to feed preheated air or special liquid to prevent the wings and empennage from freezing. The high temperature resistant nozzle uses the principle of sweating on the surface to cool the hot surface, which is called sweating material. 3. Porous titanium is also a good porous electrode material for water electrolysis, and it can be coated with platinum, iridium, ruthenium and other metals to enhance its electrochemical performance. The current PEM water electrolysis hydrogen production equipment widely uses porous titanium plate as its anode diffusion electrode material. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.
Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1~3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media, and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories. other apps 1. Medical field: Porous titanium plate has good biocompatibility and mechanical properties, and is widely used in medical fields such as orthopedics and dentistry, as artificial bone and dental implants. 2. Energy storage field: The large surface area and pore structure of porous titanium plates make them potential applications in capacitors, which can be used in the manufacture of electronic devices such as batteries and capacitors. 3. Sewage treatment field: The high specific surface area and good catalytic performance of porous titanium plates can be used in the field of sewage treatment, such as the oxidative degradation of organic wastewater and the adsorption of metal ions. 4. Environmental field: Porous titanium plates can be used to clean harmful gases and odorous substances in the atmosphere, and can also be used in environmental protection fields such as seawater desalination and water resource utilization. 5. Aerospace field: The lightweight and high strength of porous titanium plates can be used in the aerospace field, such as manufacturing aircraft, satellites and other components.
As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Applications 1. Decarbonization filtration in the concentrated preparation link of the pharmaceutical industry and security filtration before terminal filtration in the thin preparation link. 2. Filtration, decarbonization filtration, and fine filtering of materials used in the manufacturing of raw materials. 3. Filtration following ozone sterilizing and ozone aeration, as well as security filtration for water treatment industries RO, EDI, and ultrafiltration systems. the 4. Clarify and filtering of alcohol, beer, soy sauce, vegetable oil, mineral water, and other drinks and food. 5. Material purification and sintered porous titanium plate at the feed inlet, decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultra-fine fine bodies and catalysts, precision filtration and system heat conduction after resin adsorption Impurity removal and filtration of oil and materials, catalytic gas purification, etc. the 6. Before reverse osmosis in the seawater desalination field, oilfield return water filtering and security filtration. 7. White clay filtration and high-temperature decarbonization in the dye business. 8. Steam, compressed air, and catalytic gas purification and filtration are the primary aspects of gas purification. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape.
Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plates can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In an electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.
In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high temperature resistance and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m 65 m Material: Pure titanium Operating Temperature: 0 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high temperature resistance, breathable Features 1. Corrosion resistance It exists between the bipolar plate and the catalyst layer. During the electrochemical reaction, the high current density is 2A/cm2, which has high electrical corrosion resistance and must have corrosion resistance; 2. Porous air permeability Serve as a medium for hydrogen/oxygen or methanol/air to diffuse to the catalyst layer, and must be a porous and breathable material; 3. High conductivity To act as a current conductor, it must be a highly conductive material; 4. High thermal conductivity The reaction is an exothermic reaction, and overheating will cause damage to the proton exchange membrane. The gas diffusion layer must be a high thermal conductivity material to conduct heat away to avoid damage to the proton exchange membrane; 5. Good permeability Fuel cell reaction to generate water will cause performance degradation, so the gas diffusion layer must be able to export water and have high hydrophobicity; Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material "sweat" to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate, and poison, etc. (3) Impregnated with the anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The resulting PTL porous titanium sintered plate is then coated with a catalyst material such as platinum or iridium, which helps to increase the efficiency of the hydrogen production reaction. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity. 2.Pore size. 3.Thickness. 4.Catalyst loading. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several key features that make it an effective catalyst for the hydrogen production reaction. Some of the features of PTL porous titanium sintered plates include: 1.High surface area. 2.Corrosion resistance. 3.High conductivity. 4.Tailorable porosity. 5.Durable and long-lastinge. 6.Effective catalyst. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several important applications in various industrial processes. Some of the common applications of PTL porous titanium sintered plates include: 1.Hydrogen production: PTL plates serve as the catalyst for the hydrogen production reaction in electrolyzers, splitting water molecules into hydrogen and oxygen using an electric current. 2.Fuel cells: PTL plates are also used in fuel cells as an electrode material, facilitating the chemical reactions that produce electricity from hydrogen and oxygen. 3.Water treatment: PTL plates are used in water treatment applications to generate hydrogen peroxide or ozone for use as a disinfectant or oxidant. 4.Electrochemical synthesis: PTL plates can be used in various electrochemical synthesis processes to facilitate the production of chemicals and materials such as chlorine, caustic soda, and hydrogen peroxide. 5.Environmental remediation: PTL plates are used in environmental remediation applications to degrade contaminants such as chlorinated solvents and pesticides. Overall, the PTL porous titanium sintered plate is a versatile and important component in various industrial processes, providing efficient and reliable catalytic performance in a variety of applications.
Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling. Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customers needs, greatly shorten the time of delivery. We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.
Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling. Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customers needs, greatly shorten the time of delivery. We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.
Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling. Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customers needs, greatly shorten the time of delivery. We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.
