CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings : Titanium Elbow (45�°, 90�°, 180�°) Titanium Reducer (Concentric, Eccentric). Titanium Tee (Straight, Reducing). Also stub ends, caps, flanges etc. Standard: ASME B16.5, ASME B16.9, ASME 16.11
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
Our company exports titanium pipes, plates, rods, and wires
Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.
Medical, serospace, military, petrochemical, engineering, metallurgy, electroplating, vacuuming metalling, sports etc, meeting the customer's requirements iso 9001:2008 registered.
Titanium Tubes, Pipes 1)Specification: (Outer dia )4.76-135mm*(Wall thickness)0.25-4mm*Length Max15 Meters 2)Standard: ASTMB337, ASTMB338, ASTMB862 3)Application: Titanium and titanium alloy tube for condensers and exchangers 4)Packing: Wooden case 5)Surface: Brightness 6)Process method: Weleded 7)MOQ: 50kg (sample is available ) 8)payment: FOB Shanghai 9)delivery time: 7-20days 10)Mill certificate can be offered.
The specifications and dimensions made by Luoyang Shunyi Titanium Industry Co, Ltd. are shown below: Titanium grade: GR1, GR 2 GR3, GR5 Seamless tube/pipe diameter: 5-168 mm Seamless tube/pipe wall thickness: 0.5-4 mm Seamless tube/pipe length:
Titanium Exhaust Pipe 1. Standard: ASTM B338, ASME SB338, ASTM B861, ASME SB861 2. Grade: Gr1, Gr2, Gr3, Gr4 Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr19, Gr23 3. Size: OD 2.0-219mm x wall 0.3-12mm x length 18000mm max. 4. Feature: 1). high strength. 2). fine corrosion resistance. 3). low density, light weight. 4). high/low temperature resistance. 5). high resistance to strong acid.alkali 5. Application: All kinds of corrosive fluid transmission pipeline system, Titanium bicycle tubes, automobile exhaust pipe, offshore aquaculture
Seamless/welded titanium and titanium alloy tubes & pipes Specification astm b337, asme sb338, astm b338, astm b861, astm b862 Material grade gr1, gr2, gr4, gr5, gr7, gr9, gr11, gr12 etc. Dimension range od 3.0-114.0mm, wt 0.2-10.0mm, l18000mm Application heat exchanger, cooling tower, aviation, medical, industry etc.
Titanium elbow specifications Grades : titanium, nickel alloy gr2 gr9, gr12 Standards :astm b 16.9 /16.11 Range Butweld :(15 nb) to 48 (1200nb) in sch 5, sch 10, sch20, sch 40, sch 80, sch 160, sch xxs etc. Type : welded (erw), seamless Forged (socketweld) :(15 nb) to 48 (1200nb) in 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs pn 10, pn 16, pn 25, pn 40, pn 64, pn 100, pn 160 etc. 1.Specifications:(30 45 60 90 180 )NPS 1/4''-24'' wall thickness:sch5s-sch160s And we can customized as your drawings or samples 2. Standard:astm b363, asme b16.9, asme sb363, ansi b16.9, 3. Material:pure titanium or titanium alloy , Gr1, gr2, gr3, gr4, gr5, gr7, gr9, gr12 4.Titanium pipe fittings : 1)strictly implements the technical specification of asme b16.9 2)elbows (45d, 90d, 180d) nps 1/4" - 24" 3)reducers (concentric, eccentric) nps 1/4" - 24" 4)tees (straight, reducing) nps 1/4" - 24" 5)stub ends nps1/4" -2 4" 6)caps, coupling, nipple , welding fittings, valves available
Bango alloy offers titanium tubing and titanium pipe in a variety of grades and sizes for chemical plant, powder generation, aerospace, ship building, sea water desalination, and many other industries. Testing items for titanium tube and titanium pipe Chemical composition and mechanical properties Bending, flaring, flattening, hydraulic, eddy current, ultrasonic (against different specification or specific requirement by customer). E-mail: sales@reallymetals.com Primarily used specification for titanium tube and titanium pipe Astm b861 (titanium and titanium alloy seamless pipe) Astm b862 (titanium and titanium alloy welded pipe) Astm b338 (seamless and welded titanium & titanium alloy tubes for condensers and heat exchangers)
Chemical Propeties: N C H Fe O Al V Pa Mo Ni Ti Gr1 0.03 0.08 0.015 0.20 0.18 / / / / / Balance Gr2 0.03 0.08 0.015 0.30 0.25 / / / / / Balance Gr5 0.05 0.08 0.015 0.40 0.20 5.5~6.75 3.5~4.5 / / / Balance Gr7 0.03 0.08 0.015 0.30 0.25 / / 0.12~0.25 / / Balance Gr9 0.03 0.08 0.015 0.25 0.15 2.5~3.5 2.0~3.0 / / / Balance Gr12 0.03 0.08 0.015 0.30 0.25 / / / 0.2~0.4 0/.6~0.9 Balance Applications: 1.)Electron industry 2.)Chemical industry, Petrochemical industry 3.) horologium, eyeglasses, jewelry 4. )Sports equipments, golf 5.) mechanical equipment, precision machining 6) Environmental protection equipments , electroplating,, diaphragm, etc. Minimum Order: Comply with customer's demand. (If the quantity is less than our MOQ, we may recommend you the similar dimension in stock. ) Packaging: Ply wooden cases or In accordance with customers requirement. If you have interests in our products, please don't hesitate to contact us!
Cold-rolled: OD: 8.0mm-114.0mm (0.32"-4.49"), WT: 0.5mm-7.5mm (0.02"-0.30"), Length: 4000mm (157.5") max (OD.: 8.0mm-15.0mm, 0.32"-0.59"), 12000mm (472.4") max (OD. over 15mm, 0.59") Extruded: OD: 25mm-210mm (0.98"-8.27"), WT: 4mm-30mm (0.157"-1.18"), Length: 1000mm-10000mm (39.4"-393.7") Material: Gr.1, Gr.2, Gr.3, Gr.7, Gr.9, Gr.12, etc. Standard: ASTM B 338, ASTM B 337, ASTM B 861 Shape: Round
Specifications 1.Grade:gr1, gr2, gr3, gr5, gr7, gr9 2.Standard:astm b337, astm b338, astm b861, astm b862 3.Size:od:1.5~420mm, wt:0.3~16mm (10-120)×(0.4-10)×l (od×thk×l) Normal spec 1)od12.7×0.889×l 2)od15.88×0.889×l 3)od19.05×0.55×l 4)od12.7×0.55×l 5)od25.4×1.0xl Applications (1)heat exchangers and condensers (2)corrosive fluid transmission pipeline system (3)titanium bicycle tube, automobile exhaust pipe (4)offshore aquaculture Astm b861 gr2 seamless titanium pipe /tube for automobile exhaust tube chemical requirements NCHFeOAlVPaMoNi Gr 10.030.080.0150.200.18///// Gr 20.030.080.0150.300.25///// Gr 30.050.080.0150.300.35///// Gr 50.050.080.0150.400.205.5~6.753.5~4.5/// Gr 70.030.080.0150.300.25//0.12~0.25// Gr 90.030.080.0150.250.152.5~3.52.0~3.0/// Gr120.030.080.0150.300.25///0.2~0.40.6~0.9
Specifications Astmb 338 seamless titanium pipe: Outer diameter: 0.8-420mm Wall thickness: 0.1mm-16mm Astmb 338 seamless titanium pipe Specifications 1.Astmb861/338 2.Od:0.8-420mm 3.Wt:0.1-16mm 4.Length:
Its products have been widely used in chemical, petroleum, medicine, chemical fertilizer, metallurgical and other industries both at domestic and abroad markets. The titanium & nickel product ensures our customers that all their requirements and needs are met. It includes that every product that we distribute are approved and accredited with at least one of the following: Chinese Std. GB HG ,U S Std. ASTM(ASME), International Std. ISO, Germany Std. DIN, Britain Std. BS, France Std. NF, Russia Std. OCT, Japanese Std.
Titanium pipe. Different as your requirement.
The Titanium Tubes and Pipes supplied by us are known for their corrosion resistant nature and durability. We ensure that the products we procure are made of premium quality raw material. Grades GR 1, GR -2, GR-3, GR-4, GR-5 Range OD 6mm to 1016 mm & Thk 1mm to 20mm.
1. Materials: grade1, 2, 5, 6, 7, 9, 12 2. Specification: asme b16.9, astm b363, asme b16.5, astm b861 3. Size: as per customer request 4. Application: used in petroleum, gas, chemical industry, electric power, metallurgy, pharmacy, shipyard and other similar yield, such as water tank, boiler, heat exchanger unit, absorption type refrigerator, turbo refrigerator and screw refrigerators, titanium bicycle tube, automobile exhaust pipe, off shore aquaculture.
Specification: ASTM B/ASME SB861,ASTM B/ASME SB338,ASTM B/ASME SB523, ASTM B/ASME SB658, ASTM B/ASME SB161,ASTM B/ASME SB163, AMS 4942/4943, DIN, JIS Material: Gr.1/Gr.2/Gr.3/Gr5/Gr.9/Gr.12, Zr 702 etc.
