Specification: 1).Size: 2'', 3'', 4'' 2).Working pressure:6000-20000psi(42mpa-140mpa) 3).Working temperature: -29â°c~121â°c. 4).Application enrvironment: standard or h2s 5).Standard: api standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Bend is a kind of metal pipe joints with ball bearing, is in the united states FMC company transfer of technology digestion, absorption and production of technical innovation on the base of series products, its specifications are 1"-4", the rated working pressure of 25-140 Mpa(3629 psi- 20000psi), can provide the normal temperature, low temperture and sulfurous gas under the condition of using various typeds of elbow and repair kits.
Wellhead Swivel Joint 1" Fig 1502 x 15000psi Working PressureWellhead Fitting 1" x Fig 1502 Swivel JointGeneral of the 1" Fig 1502 Swivel JointJC Wellhead is specilized in designed and manufactured various models of swivel joints and their repair kits. The 1" Fig 1502 Swivel Joint is suitable for normal or low temperature and H2S environments. The sizes of swivel joint is ranging from 1" to 4" and related Working Pressure ranging from 2000psi to 20000psi. There are long and short radius swivel joints available. Long radius swivel joints can minimize fluid shock, and has better performance of resistance for scouring an corrosion. We also need to use short radius swivel joint for low pressure operation due to limited installation space.Specification of the Swivel JointNominal Diameter(in)Connection TypePressure (psi)Standard Length (mm) AStandard Length (mm) BStandard Length (mm) C1"Inner Thread100001811891811"1502(M*F)150002131882131"1502(M*F)150002131882131.5"Inner Thread100002022382021.5"1502(M*F)150002572382571.5"1502(M*F)150002572382572"Inner Thread100002292722292"1502(M*F)150002772722772"1502(M*F)150002772722772"1502(F*F)150002242722772"200(M*F)200002772753152"2002(M*M)200003182773183"Inner Thread150003274173273"1502(M*F)150003684173663"1502(M*F)150003664173663"2002(M*F)200005185385184"1002(M*F)100004094604114"1002(M*F)100004044604114"1502(M*F)15000518538518Wellhead Swivel Joint 1" Fig 1502 x 15000psi Working PressureWellhead Fitting 1" x Fig 1502 Swivel Joint
High Pressure 90 degree elbow pipe/Swivel joints Nominal Size:2"-4" Pressure Rating:2000-15000PSI Material:Alloy Steel Standard:API 16C Pipe Elbows are mainly used for connecting two pipes or tubes,allowing a change of direction.We can provide short radius elbows and long radius elbows.Usually,pipe elbows are made of carbon steels,alloy steels,stainless steel,and etc.
Item: JF water rotary joint Medium: coolant water/ hot water Max.Speed: 2000 R.P.M Max. Pressure: 2.5 Mpa Temperature: 80/130 commercial plastic bag + paper box + wooden case or depend on client's require.
Features: 1) Brand: TIT 2) Certificate: ISO9001 3) Material: Alloy, 20Cr, GCr15. 4) Surface Hardness: 58-64 HRC. 5) Inner Hardness: 25-45 HRC. 6) Packing: packed with plastic bags and boxes. 7) OEM is available, can be produced as customers' design and samples. Box with carton.
Dimension 23.82x61.29
Many kinds of universal joint. Product+accessories+plastic bag+carton+wooden box.
Ball joint.
C.V joint Applicable mode: Vew10 vsw1 90up wm1 4wd 88up wu11 a/t 87up feeling1.8 all 75-82 pt 12 a/t ca181 88up vew11 m/t pu12 m/t a/t Inner box:165*55*55 mm
CV Joints manufactured to highest standards
Univeral joint Discussed Depended
Bellows from 25mm to 1500mm as per ejma standard, for any application. Any number
Offer post time: 2008-09-11 Expiration date: 2009-07-31 Name: Outer C.V. Joint Application: NISSAN Certificate: ISO:9001 Guarantee: 50, 000kms Min order: 300pcs Model: NI006 Productivity: 15000pcs/month Payment: t/t or l/c at sight Origin: china Transportation: by sea 1) designed to meet rigid tolerances and to fit and replace a wide range of oem applications 2) complete cv joint kits include cv joint, boot, grease, nut and clamps 3) the boot is used to protect against road hazards, while grease keeps dirt and moisture out 4) quality components and rigorous engineering ensure longer durability Each cv joint packed in printed box with repair kits, then 10 boxes in carton
Market After Market Make Isuzu Application Drivetran Type With 2 Bolt Square Plate Structure FIG-G3 Material 20Cr, 20CrMnTi D m/m 56.00 O m/m 174.00 Net Weight 3955g Gross Weight 4055g.
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
Ball Joint ZZL0-33-051 Application Summary:FORD MAZDA Product Description Description NM#:NM12032948 Ref.:ZZL0-33-051 Name:Ball Joint Unit:PCS Price: Front Axle, Upper Detailed Applications FORD EXPLORER 1993-1994 FORD RANGER 1993-1997 FORD RANGER SUPER 1993-1997 MAZDA B2300 1995-1996 MAZDA B3000 1994-1996 MAZDA B4000 1994-1997 MAZDA NAVAJO DX 1993-1994 MAZDA NAVAJO LX 1993-1994 We supply quote for car ball or cv joint suit for MERCEDES BENZ, IVECO, DODGE, KAMAZ, ASTONMARTIN, MG,HINO, SSANG YONG, NISSAN, ISUZU, PEUGEOT, LAND ROVER, DAEWOO, LADA, BUICK, GEELY, AUDI, GMC, INFINITI, HYUNDAI, TOYOTA, MAZDA, RENAULT, BPW. OE Numbers ZZL0-33-051