Sun Protection Film Welding Sheet Suppliers and Manufacturers

Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing

Name : Aluminium coil(sheet) Standard : JIS G3141,DIN1623,EN10130 Material : 1050,1060,3003, 3A21,5052.5005.5083.5A05,6061 Sheet : 0.15 mm- 2.0mm Normal sheet : 2.0mm-6.0mm Medium plate : 6.0 mmt-25.0mm Plate : 25mm-200mm Super thick plate more than 200mm Packing : Export standard packing or according to customers requirement Certificate : ISO9001:2008,SGS Shipment : Within10-15 workdays,25-30days when the quantity beyond 1000tons

Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize

Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize

Thickness 0.13-3.0mm Width Galvanized steel strip 24-600 mm; galvanized steel coil:600-1250mm Coil weight Usually is 3-4.5 tons,the max coil is 10 tons Zn coating 0.13-0.8 mm is 30-150 g/m2; 0.8-1.5 mm is 30-180 g/m2;1.5-6.0 mm is 30-275 g/m2 Coil ID 600-1500 mm,Normal width is 91 4/1000/1219/1250/1500 mm Steel grade DX51D,DX52D,DC01,DC02,SGHC Surface regular/mini/big/zero spangle,skin pass, chromated, unoiled, dry Packaging seaworthy export standard package, or according to the customers requirement

Product Name Hot rolled steel sheet Thickness plate:0.35-200mm strip:1.2-25mm Length 1.2m-12m or according to customer's special request width 610,760,840,900,914,1000,1200,1250mm Tolerance Thickness: +/-0.02mm, Width:+/-2mm Material grade Q195 Q215 Q235 Q345 SS490 SM400 SM490 SPHC SPHD SPHE SPHF SEA1002 SEA1006 SEA1008 SEA1010 S25C S35C S45C 65Mn SPHT1 SPHT2 SPH3 SPH4 QstE Others as your requirement surface iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface

Name: Aluminium coil(sheet) Standard : JIS G3141,DIN1623,EN10130 Material : 1050,1060,3003, 3A21,5052.5005.5083.5A05,6061 Sheet : 0.15 mm- 2.0mm Normal sheet : 2.0mm-6.0mm Medium plate : 6.0 mmt-25.0mm Plate : 25mm-200mm Super thick plate more than 200mm Packing:Export standard packing or according to customers requirement Certificate : ISO9001: 2008,SGS Shipment:Within10-15 workdays,25-30days when the quantity beyond 1000tons

Eco-friendly low viscosity modified starch suitable for cotton, viscose, acrylic and blends with polyester and other warp yarn sizing. Its excellent penetrating & film forming property plays an important role in the protection of yarn, it gives highest weaving efficiency on all types of shuttle less loom .

- Relief Sun is a lightweight and creamy type organic sunscreen that's comfortable on skin. - Even if you apply a large amount several times, it is not sticky and gives a moist finish like that of a light moisturizing cream. Containing 30% rice extract and grain fermented extracts, it provides moisture and nourishment to the skin. - Lightweight cream texture - Rice extract 30% + Grain fermented extracts - SPF & PA Protection

Made from natural sea grass, cool, comfortable. With its wide brim, this hat will protect your skin from the sun. Summer heat is now not a big deal with our Conical Straw Hat. It will add instant color and fun to your party. Color: Colorful Diameter: 40cm Design: Painting Logo: Customized Usage: Daily Life MOQ: 100 pcs Packing: In carton

Made from natural seagrass, cool, comfortable. With its wide brim, this hat will protect your skin from the sun. Summer heat is now not a big deal with our Conical Straw Hat. It will add instant color and fun to your party. Color: Colorful Diameter: 40cm Logo: Customized Usage: Daily Life MOQ: 100 pcs Packing: In carton

A unique copolymer warp yarn sizing agent for Cotton, Rayon, Modal Polyester and Blends of Polyester/Cotton/Viscose Spun yarns. Heavy fabric constructions are easier to weave at low size add-on using SizeMagik-LP4. Low add-on also permits greater protection on high speed looms expensive reeds and sensitive mechanical parts life. Better film properties of the product provide the lower warp breaks and it improve the finished products quality. Reduced dropping level in sizing and weaving it provide more comfortable working conditions and reduce maintenance cost.

Fish skin contains collagen, a protein that is used in, for example, cosmetics to increase skin elasticity and strength. Collagen can also be turned into gelatine which is utilised in foodstuffs. Moreover, fish skin contains many minerals such as protein, unsaturated fatty acids, sulfur, choline, lecithin and calcium. Choline enhances memory. Lecithin has the effect of protecting the liver, promoting the nervous system and developing the brain. Unsaturated fatty acids are effective in the prevention and treatment of atherosclerosis, high cholesterol, high blood pressure and cardiovascular disease. Packing: 15-20 kgs/PPbag/Box Model Name: Sarah (+84347587878) Process: Collect the skin after fish fillet removing, clean with water and drain, sun -dried Impurities (bone,etc): < 1% Type of fish: Basa Fish/ Pangasius bocourti Color: Nature

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

LDPE Agri Film Natural Color (Top Use Without UV Layer) For Sales MATERIAL : LDPE agri film natural color (top use without UV layer) CATEGORY : LDPE TYPE : agri film GRADE : natural color (top use without UV layer) SPECIFICATION : LDPE agri film use for green house,top use. No UV protection layer. Around 400 micron thickness. loss rate under 15%. 100-200mt monthly supply. ORIGIN : Spain LOADING WEIGHT : 20 Tons CNF (USD/Ton) : 500-700$ Hai Phong/Cat Lai

Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum &amp; chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.

Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum &amp; chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.