IoT101 is ultra low power IoT module which can be used to converts DI to 4G commnunication. It has one DI interface to converts DI to MQTT protocol and Modbus TCP protocol, and then connnected the IoT cloud platform. It is small and adopts low power design. There are PCBA, waterproof shell, and metal shell for selection.
IoT Wi-Fi Module F11AMIM13-B1 IoT Wi-Fi Module Mini Wi-Fi Module Function: Name:Â F11AMIM13-B1 Main chip:Â RTL8711AM Package size:Â 24.0*18.0mm LGA Physical interface:Â Uart/GPIO/I2C/PWM/SPI/ADC Wireless standard:Â 802.11b/g/n Frequency band:Â 2.4G Broadband:Â Cortex M3,166MHz RF Chains:Â 1T1R Transmission speed:Â 150Mbps Working voltage:Â 3.3Vdc Antenna connection method:Â Onboard Product introduction Meet 802.11b/g/n IEEE wireless standard Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism Module applies to: IOT Internet of things, robots, smart home field
Product Description: SIMCom presents an ultra compact and reliable wireless module. The SIM900 Quad-band GSM/GPRS module is part of SIMComs new Surface Mount Technology (SMT) series, allowing you to benefit from small dimensions and cost-effective solutions. Featuring an industry-standard interface, the SIM900 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900 can fit almost all the space requirements in your M2M application, especially for slim and compact demand of design. General Features: - Quad-Band 850/ 900/ 1800/ 1900 MHz - GPRS multi-slot class 10/8 - GPRS mobile station class B - Compliant to GSM phase 2/2+ C Class 4 (2 W @850/ 900 MHz) C Class 1 (1 W @ 1800/1900MHz) - Dimensions: 24* 24 * 3 mm - Weight: 7g - Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands) - SIM application toolkit - Supply voltage range 3.4 ... 4.5 V - Low power consumption - Normal Operation temperature: -30 C to +80 C Specifications for Fax - Group 3, class 1 Specifications for Data - GPRS class 10: max. 85.6 kbps (downlink) - PBCCH support - Coding schemes CS 1, 2, 3, 4 - CSD up to 14.4 kbps - USSD - Non transparent mode - PPP-stack Specifications for SMS via GSM/GPRS - Point to point MO and MT - SMS cell broadcast - Text and PDU mode Drivers - MUX Driver Specifications for Voice - Tricodec C Half rate (HR) C Full rate (FR) C Enhanced Full rate (EFR) - Hands-free operation Echo suppression Interface - Interface to external SIM 3V/ 1.8V - analog audio interface - RTC backup - SPI interface - Two Serial interfaces - Antenna pad - I2C - GPIO - PWM - ADC Compatibility - AT cellular command interface Approvalsplanning - CE - FCC - ROHS - PTCRB - GCF - AT&T - ICASA. 200pcs/casing.
GPS/GLONASS Module, GPS Engine Board, NB-IoT Module, GSM/3G/4G Module, GPS / GSM Antenna, GPS Mouse ,GPS Devices, GPS Systems, GPS Receiver, Car Tracking, AVL, Security System, GPS/GNSS Antenna, GSM/3G/4G Antenna, Wifi Antenna, RF Cable, RF Connector.
GPS/GNSS/GALILEO/SBAS Module The Ct-G354 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm 52 track verification channels SBAS (WAAS or EGNOS,MSAS) Active Jammer Remover, removes in-band jammers up to 80 dB-Hz Tracks up to 8 CW jammers Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) �?�¢?? Need operator support Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Reacquisition Time: 0.1 second RF Metal Shield for best performance in noisy environments Hardware and Software Based on the high performance features of SiRFstarV low power single core logic. Adaptive micropower controller Only 50 to 500�¯�¿�½?�?�¼A maintains hot start capability (core logic) < 10mW required for TricklePower mode RoHS compliant (lead-free) Advanced navigation features Smart sensor supported by interface External interrupt input for context change detection MMCX RF Connector Dimension : 3
Ct-G551 3.3V utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as : - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments
Ct-G340 S5 of products utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks then old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic)
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) * RF Cable : RG174, 2.7 ±0.3mm, Black * Cable Length : 5M ±5cm * RF Connector : SMA (M) * Frequency Range : 1575.42 �± 1.023MHz * Gain : At Zenith : Typ 35 dBi (cable loss) Note:1 mounted on the the 70mm*70m ground plane * Output Impedance : 50
* Frequency Range : 1575.42 +- 1.023 MHz * Gain : At 90 deg 14.5 +- 4dBi * Output Impedance : 50 * Operation Temperature : - 20 deg C to + 65 deg C * Storage Temperature : - 30 deg C to + 75 deg C * RF Coaxial Cable : 1.13 +- 0.1mm, L =60+/- 2 mm * RF Connector : I- PEX ( F ) * Patch Antenna size : 15 x 15 mm * Dimension: 15 x 15 x 7.2 mm
Micro SIM CARD Push Push Type 6PIN w/SW Material : - Insulator : High Temperature Thermoplastic, UL 94V-0. - Contact : Copper Alloy - Shell : Stainless Plating : - Contact : Plated 30u" Ni Overall Contact Au 1U - Shell : plated 30u" Ni Overall - Plated 1u"Au Selective Contact Area Electrical : - Current Rating : 0.5mA AC/DC max. - Voltage Rating : 125V AC/DC - Ambient Temperature Range : -20~+60 - Storage Temperature Range : -40~+70 - Ambient Humidity Range : 95% R.H. Max. - Contact Resistance : 100m max. - Insulation Resistance : 1000M min./500VDC
Ct-GM551 of products utilizes SiRFstarV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Features/Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Features/Hardware and Software - Based on the high performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
2.4GHz/5.8GHz WIFI Antenna Ct-W03 wireless antenna Specification * Frequency : 2400-2500/4900-5800 MHz * Antenna Type : Rectangle Patch antenna * Mounting : Double side tape * Antenna Gain : 2400-2500MHz 2 dBi / 4900-5800MHz 3dBi * VSWR : 1.7 * Power : 10 Watts * Impedance : 50 ohms * Polarization : Vertical * Antenna Connector : SMA PLUG RP (Option) * Cable Length : RG174 Length=3Meter (Option) * Dimensions : L132xW22.5xH7mm * Antenna Color : black
Frequency Range1575.42 ± 10 MHz. 1602 ± 8MHz Gain1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith Output Impedance50 Output VSWR2.0 Max RF CableRG174 , 2.7 �± 0.2mm , Black Cable Length1M/3M/5M �± 5cm RF Connector SMA 180 (M)
Features : This antenna is designed for LTE/GSM/UMTS/3G/WiFi wireless Specification * Operating Frequency : 700-960/1700-2700 MHz * Antenna Type : Rectangle Patch antenna * Mounting : Double-side tape * Gain : 1-3 dBi * VSWR : �?�¢?�?�¦1.9 * Power : 10 Watts * Impedance : 50 ohms * Polarization : Vertical * Antenna Connector : SMA PLUG (Option) * Cable Length : RG174 Length=3M * Dimensions : L132xW22.5xH7mm * Antenna color : Black
Features : Antenna, swivel with SMA(M)st.(Nickel), Black 746 & 824-960 & 1710-2170, 2300-2500 & 2700MHz Electrical Properties * Frequency Range : 699-960MHz VSWR : 3.5 Max Gain : 1.0 dBi * Frequency Range : 1710-2700MHz VSWR : 3.0 Max Gain : 2.5 dBi * Impedance : 50 * Radiation : Omni Mechanical Properties * Antenna Cover : ABS * Tube Color : Black * Operating Temperature : -20 deg C~+65 deg C * Connector Type : SMA(A) Plug * Cable Type : RG178 Cable
Wifi module, bluetooth module, gateway module, router module, iot app, home automation solution.
Description of low power high performance of low cost wifi module price Dl2103b is designed as a wifi module based on atheros 4004 it has ultra-small Size and supports smd the module works as an iot node and has been widely used In iot appliances Applications of low power high performance of low cost wifi module price Smart gateway Iot products Consumer electronics Smart home appliances Industry control Remote device monitoring Features of low power high performance of low cost wifi module price Support 2 4ghz 802 11b g n with sta ap mode Support wep wpa wpa2 psk encryption mode Support multiple network protocols Option on board antenna or external antenna Low power consumption Ultra small size support smd Support online firmware updating Srrc authentication Rohs compliant Datasheet of low power high performance of low cost wifi module price Wireless parameters Wireless standard 802 11 b g n Frequency range 2 412ghz 2 484ghz Transmit power 802 11b +15+ -2dbm 11mbps 802 11g +14+ -2dbm 54mbps 802 11n +13+ -2dbm ht20, mcs7 Receiver sensitivity 802 11b -93dbm 11mbps cck 802 11g -85dbm 54mbps ofdm 802 11n -82dbm ht20 mcs7) Antenna option Built in pcb pin External i-pex connector Hardware parameters Data interface Uart gpio Operating voltage 2 9v ~ 3 6v Operating current Consistently sending: peak ~200ma Normal mode average ~50ma, peak ~200ma Low power mode average ~10ma, peak ~200ma Operating temp -20 c 70 c Storage temp -45 c 125 c Dimensions and size 15mm x 30mm x 3.5mm Software parameters Network type Ap sta Security mechanisms Wep wpa-psk wpa2-psk Encryption Wep64 wep128 tkip aes Update firmware Local wireless, remote Customization Sdk supplied Network protocol Ipv4, tcp udp