Rubber pined screw and barrel specification: 75mm~+200mm Rubber cold or hot-feed screw and barrel specification: 30mm~+250 mm Nitrided Hardness: HV900-1000 Nitrided case depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy Depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process
The bimetallic barrel for single screw is a kind of barrel moulding 2-3mm thick alloy coat on the barrel inner wall which has excellent corrosion resistance, abrasion resistance and high working temperature. And its useful service life is greatly improved contrast to the common nitrided cylinder. Bimetal has more obvious advantages when processing special plastics to enhance the abrasion life, such as engineering plastic, fluorine plastics, PPO and etc. The company product's single/twin screw, uses special alloy powders being sprayed and welded on the screw's ridge, and uses different alloys and welding methods for the screw of different functions. Materials: Quality 38CrMoAlA Quality power metallurgy raw materials
Barrel & screw for extruder Specifications: 15mm -0mm Length/Diameter Ratio: L/D=15-45 Screws can be selected from ordinary, gradual, mutational, pinned, shielding, separating and exhausting types. The compression ratio of screw can be designed according to different raw materials and requirements of clients.
Specification: Screw diameter: d15- d 300 L/d ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case
Over 29 years experience in screw and barrel , more info pls find kaylee(at)tizatech.com Specification: Diameter: Ã?15-Ã?500 L/D ratio:15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based alloy 4)Tungsten carbide Processing Technology: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Technical Parameter: Nitrided layer depth:0.50-0.80mm Nitrided hardness: 900-1100HV Nitrided brittleness: Less than 2 level Surface roughness: Ra 0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness: â?¥950HV Chrome-plating layer depth: 0.025~0.10mm Bimetallic layer depth: 2 mm Bimetallic hardness: HRC50-65 Material to be extruded: PP, PE, PVC, ABS, AS, PS etc. We can manufacture all types of screws and barrels according to clientsâ?? requirement
Alloy screw Introduction: 38CrMoAlA nitrided spiral-spray nickel-based alloy It adopts Germany imported automatic plasma surfacing machine for alloy surfacing welding. The thickness of the alloy is more than 1.5mm, the hardness is HRC50~56, the welding strength is high, the structure is compact, and the screw wear resistance, high temperature resistance and corrosion resistance can be improved. Basic parameters: Screw alloy hardness (HRC): 48-58 Wear resistance: good Corrosion resistance: poor Scope of application: Applicable resin with 15% glass fiber below the plastic Add glass fiber 15% or less PC, PMMA, PP, PP fireproof, PS, AS, ABS, PVC, PET, PO, POM, AS, TPU, TPR, TPE, PC+ABS Alloy barrel nickel base alloy Wear and corrosion resistant Basic parameters: Hardness (HRC): 55-60 Wear resistance: excellent Corrosion resistance: excellent Temperature range (°C): �450 Scope of application: Production of viscous, wear-resistant and corrosion-resistant resin General general resin and engineering resin contain 50% glass fiber, PE, PP, ABS, AS, PS, TPE, PC, PEI, PEEK, PPS, PAR Special engineering resin, PA, PBT, LCP containing less than 45% of glass fiber. Ingredients and processes: Alloy composition: Ni+Cr+W+B
Single Screw and barrel for Injection Moulding Machine Nitride hardness HV850 â?? 1000 Screw diameter Range Φ20~Φ300mm Max. Barrel Inner Bore Diameter 500mm Nitride case depth 0.45 - 0.7mm Screw bimetallic depth 0.8-1.2mm Barrel bimetallic depth HRC 58-60
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent cylinder, screw, screw and barrel assembly parts for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
250~3200KN Mould Clamping Force, 30-25000g Shot Weight Diameter of screw: ¬ª20~¬+200 Screw can be mated with different heads, and barrel can be mated with different nozzles. Nitrided Hardness: HV900-1000 Nitrided case depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy Depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process
Specification: Screw Diameter: D15- D 300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950HV Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing Oil Coated& Film Wrapped in Wooden Case
Screw and Barrel for Haitian Mars Series Injection Molding Machines Screw and Barrel for Haitian Mars Series Injection Molding Machines Haitian Mars Series includes : MA600 MA900 MA1200 MA1600 MA2000 MA2500 MA2800 MA3200 MA3800 MA4700 MA5300 MA6000 MA7000 MA8000 MA9000 MA10000 MA12000 MA13000 MA14000 MA16000 MA18500 MA21000 MA24000
1.Conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale Conical twin screw barrel for plastic processing machinery Materials38crmoala 42crmo(jis scm440) 9cr18mov Skd61 etc Port departure Ningbo port Shanghai port Technical ParameterDiamete45/2- 150/2 Technical ParameterRoughnessRa 0.4um Hardness of nitrideHv850-1000Hardness of Quenching temperingHb280-320 Alloy depth0.8-2.0mmDepth of nitride layer0.5-0.8mm Alloy hardnessHrc50-65 Min 1 set Dimension:45/90 50/105 55/110 65/132 80/156 92/188
Materials: Alloy-steel of high quality 1) 38CrMoAIA(JIS SACM 645) 2) 9Cr18MoV Nitrided hardness: HV900-1000 Nitrided Case Depth: 0.5mm-0.6mm Alloy hardness: HRC50-65 Alloy depth: 0.8mm-2.0mm Advanced nitriding process Corrosion & Abrasion resistance bimetal spraying process. Wooden case.
Technical Information: Material: 38CrMoAlA(JIS SACM645), 42CrMo Bimetal material: Fe based alloy powder, Nickel based alloy powder, Tungsten carbide Technics: 1) Heat treatment 2) Nitriding treatment 3) Centrifugal casting Technical parameter: Nitrided layer depth: 0.7mm Bimetallic layer depth: 3mm Surface hardness: 950HV Nitrided brittleness: Less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm. Wooden case.
1. Diameter: 15mm-300mm Max length: 10000mm 2. Material: 38CrMoAIA Nitriding treatment,Surface hardness: HV900 Nitriding depth: 0.5-0.6mm 3. Material of barrel inside layer: tungsten alloy Surface spraying, prolong life of screw. Wooden case.
Screws and barrels for extruder machine Depth of nitrated layer: 0.5-0.8mm Hardness of nitration: 900-1020hv Fragility of nitration: less than grade 1 Surface roughness: ra 0.4um Surface hardness of nitrated cr coating layer:í²950hv Hardness of bimetallic layer: hrc55íp-72íp Thickness of cr-coating layer: 0.03-0.08mm Depth of bimetallic layer:ú+2mm Specifications of screw: ª)20-ª)250 l/d 15-50 we offer various types of extruder screws and adjust to different compression ratio, which can fulfill customer's requirement perfectly.
Twin conical screws and barrels Types of double screws Gradual, levity, commingle, taper, supper, taper, granulating etc. Used for producing pipes, profiles and sheets of ordinary plasticíópp, pe, absíóasíóps etc
Twin Conical Screws and Barrels Types of double screws gradual,levity,commingle,taper,supper,taper,granulating etc. Used for producing pipes,profiles and sheets of ordinary plasticíóPP,PE,ABSíóASíóPS etc
All specification is as per customer requiremtns and as per drawing Depernd on size
Our main office and factory are located in Zhoushan, ZheJiang Province in China. Zhoushan is a very beautiful tourist place which is famous for it's Buddism culture. Not like the other place with severe air pollution in China, we got the fresh air and blue sky which are very inhabitable for living. We have over 10 year's experience manufacturing all kinds of screws and barrels. We have dedicated technicians who are very experience in making those screws and barrels. And our factory is very close to Ningbo Seaport and Shanghai Seaport which are the two major seaports in China. Such kind of geographical advantage provided us a huge convinience to export our products. Our products are mainly applied in injection moulding machines, plastic extrusion machines and rubber extrusion machine. We are both the factory and foreign trade company so that we can provide the customers a very competitive price. We sincerely welcome all kinds of customers all over the world to negotiate with us. As a company, it's true that we are making money, but we are are also more focusing on how to make our customer's granted. Cause we know the one who made the customers happiest, earning the most money.
