Diesel Engine Gravel Sand Pump is designed specifically for the continuous pumping of extremely aggressive slurries, with a wide particle size distribution. It is can be used for handling large particles at consistently high efficiencies results in low cost of ownership.Tobee only uses the best materials for our pumps' components (casing, impeller, wear plates etc.). Tobee Gravel Sand Pump is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of gravel pump wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids etc.
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
Sand Pump is mainly used to transport drilling mud,it can be used as a slurry pump for desander, desilter and centrifuges. It can be used as a mixing pump for jet mixing, and it is also be used as an infusion pump for recharge and mud pumps.
Hydroman Submersible Sand Dredging Pump Description: Hydroman Submersible Sand Dredging Pumps are suitable to be used for pumping sand. Sand is pumped mixed with water up to 70% of solids by weight. The mixture of liquid and particles of sand and gravel is pumped in a procedure often used as a convenient way of handling sand and gravel. There are many applications for submersible sand pumps: sand and gravel extraction, dredging of rivers, harbors and marines maintenance or construction, beach reclamation, filling of Geotubes, among others. Here below you can read about some of the multiple applications of sand pumps.
Item name: dp-850 Outlet:8" Head: 15~ 30m Output: 50 hp Capacity: 480 m3/h (40% solid pumping) Solid passing: 60 mm Weight: 970 kg
Capacity:360-1520 m3/h Head:11-58 m Speed:400-850 r/min Efficiency:60-72% NPSH:2-4.5 m Max diameter of flowed particel:220 mm Inlet diameter:300 mm Outlet diameter:250 mm This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Capacity:360-1520 m3/h Head:11-58 m Speed:400-850 r/min Efficiency:60-72% NPSH:2-4.5 m Max diameter of flowed particel:220 mm Inlet diameter:300 mm Outlet diameter:250 mm
High Chrome Impeller GGH10137A05 of 3 Vane Closed Type which one of wet-end parts for 12/10G-GH Gravel Sand Pumps. Tobee's G/GH Gravel Pump Impeller is to impart and direct the centrifugal force to the sand gravel slurries. And Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation. Compared to slurry pump impeller, gravel pump impeller has larger internal profile that allows bigger particles and handling the most difficult higher abrasive slurries. 12x10G-GH High Head Gravel Pump is the world's standard pump for dredge and gravel with high pressure applications. The 12x10 pump performance range provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
GH series of High Head Gravel Sand Pump is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Tobee 10/8 F-GH Gravel Sand Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. Tobee 10/8 F-GH Gravel Sand Pump Advantages: Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on The pump can be directly matched with either motor or diesel engine Wide application. It can be used in various kinds of soil quality. Little hydraulic loss, high efficiency and low oil-consumption Little volume, light weight Steady operating, little vibration, low noise Simple & reliable construction, easily disassembly & assembly, convenient maintaining Reliable sealing without leakage Long operation life of parts, high reliability of whole set, long MTBF Obvious economic efficiency and energy-saving
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of the MAGNUM I pumps. Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6Ã??5Ã??11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Hydroman Heavy Duty Submersible Sand Pumps are designed for moving slurry, sand, and other material with ease and without clogging. Submersible slurry pumps and submersible sand pumps from Hydroman offer the highest in quality and strength over other submersible pumps.The advantages of submersible sand pump is simple operation, self-mixing operation, strong anti-abrasiveness, energy saving, environmental friendly, low noise and low failure rate.Hydroman has offered products such as submersible sand pumps with a high-pressure water jet, large-particle submersible sand pump, submersible sand pump with side cutters, hydraulic driven submersible sand pump with side cutters, stainless steel submersible slurry pump and deep-well submersible sand pump.
Tobee Hydroman Submersible Sand Pumps are a worlds standard submersible agitator pump, Capable of transporting up to 70% solids, this pump is born to dredge and has earned itself a solids-handling reputation for reliability and durability in the worlds toughest applications, The wear parts are made from high chrome alloy, It is widely used in pumping sand, sludge, ore slurry, coal slurry, sand-stones containing big solid particles etc. Design Features: The whole machine is dry submersible pump and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so high pressure water and impurities are effectively prevented from entering inner cavity of the motor. Besides the main impeller,there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out.
Summary: The SB family of pumps is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings. SB centrifugal pumps are currently in operation on land-based and offshore drilling rigs around the world. We will offer the best choice for the intended application, taking into consideration fluid conditions. Applications: Drilling applications: Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down. Others Chemical, refinery, industrial, construction and agricultural applications. Working conditions: (Outlet):DN=2â?³~6â?³ (Flow):Q=20~400m3/h (Head):H=12~62m (Working temperature):T=-40°C~60°C Please contact with us to meet you various demands. Explanation of model: SB 6 Ã? 5 11 Impeller Dia(inches) Pump outlet Dia(inches) Pump inlet Dia(inches) Sand pump
GH3101-28.11Shear pin NUT M10 W03012010 SAND PUMP SB6X8FJ Oil Filter LF3325 "Telephone System Speaker Model: 13380-005 GAI-TRONICS" https://www.amlppmfg.com/overflow-valve-zu-1-e25x10bd-p-dbs6k10-200.html roller parts 010103-00M harting HAN� 16B� 09� 30� 013� 1701 Multifunctional relay for bus tie 0,4kV ABB REF630 TBFNAAADAAAZFZNBXC PRESSURE GAUGE 232.30-E-BG410Z-ND_X0002_USHZCZZ-ZZZZ Cross bearing B8-05-02-0120 EX 13-3-E-C24-26PR plug Circuit Breaker T4L 250 TMA 250-2500 FFCL 3P 1SDA054233R1 ABB 299-8229 fuel filter PLUG 630A QA/QC REQ CERTIFICATE D87366 DEYUAN Activator 24V 90deg A10-01381 SAFETY RELIEF VALVE 2X3 LOW PRESSURE 912BJHM01JE0100 CONSTANT PRESS PLUNGER PUMP A10V Tube fitting seat P105752 SPM TWS-600S pump Includes: seal ring Regulator automat de tensiune DECS-100-B15 2" BUTTERFLY VALVE WAFER NE-C OIL RESISTANT 22119-1215311 Cylinder sleeve bimetallic for RGF-800/1000 drilling pump d120mm 348-1861 Hydraulic filter Valve cover gasket CUMMINS 3905449 SEAL WIPER 119547 Bearing NJ315E ZQ20302033 O-ring 5822-2329 328-3655 Oil filter of the gearbox system STUFFING box PACKED 643365042 20614-01-30 Hose Trapper 1005-00-12 SPINNING CATHEAD AF26001-02.15.00 O-ring 568-037 FLO 75DR V1418746 Oil seal AH0801010414 BOMCO pump Cylinder cover GH3161-05.03 HY36B-25 filter element 2.4.03.008 PACKING 5 RING WITH LANTERN 52172800 / 661007002 / 25014-01S-B Pyramid screen API45 PMD500DX-A45 GH3101-22.00Draining filter assembly VLV,HYD,DIR,2 POS,4 WAY,24V,D03, PN.H10142 End Clamp 900470-7 Guide ring 10x2.5x226.5 KG80-8 Shale Shaker Gasket 5837001 Material: elastic polyurethane Relay valve LT09HG-1X/125/02M Suction box 107.36.120.00 FK125-3 ground BOP control device hydraulic pressure harting connector 9330242616 https://www.amlppmfg.com/bearing-seal-skf67510-draw-works.html Bearing cap for hydraulic tong ZQ 203/100 ZQ203-116 EATON Connection module 415V 32A PKZM0-XM32DE Logic Element LC25DB20E6X R900912549 Solenoid valve 29544297 SEAL GASKETGH3101-03.09 Two position three way directional control valve Rexroth 3801950003 Gasket 2815780716067 GH3101-04.00Crosshead assembly 5127040702-Anti-clash loop valve FP-L6 RING SNAP 30123562 RING SEAL WEAR J005521225 Hose Assy 59024P170024 Pneumatic cylinder 5400600002 for XJ-450S Piston seal 72219 HAMMER UNION 2" FIG.1502 BUTT WELD 150240 BOLT OB BRG COVER 648401057 648401057 Pinion Z9.HL15R Weatherproof Signalling Hooter HP Steel Strap Assembly for SJPETRO XJ450T Main Drum Z03021200003AA OIL BAFFLE I AF50001-01.02-11 Clamp body 118019 SEAL RING FOR VALVE COVERGH3101-05.09 5127043006-Handle reversing valve 2-HA-1 GATE VALVE S-5000 5"X4" 5000PSI DEMCO J0251182582110 C3-C2 Inlet Gas Temperature SBWZP-2480 K 0~800�ºC Liquid Crystal Display "Auxiliary Footswitch, Part No.: 51052-003 GAI-TRONICS" spring guide vane AH100101051100 GH3101-16A djusting gasket MK-160-HB piston rubber 6
Tobee WN450 Sand Dredge Pump is singe stage single suction horizontal cantilevered centrifugal dredging pump. Tobee designs and researches this new type dredging pump by making full use of advanced CAD software, aiming to dredging river, lake and seal which is in great need to dredge in the world. The use of this dredge pump has remarkable comprehensive economic benefits and can meet dredging ship's requirements completely. Design Features: Structure suitable for dredgers: The structure of WN450 type dredge pumps are single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
Zidong pump of type zg, zgh gravel pumps are designed for continously handling the most Difficlut higher abrasive slurries which contain too big solids to be pumped by a common pump.They Are suitable for delivering slurries in mining, explosive-sludge in metal melting, dredging in dredger And course of rivers, and other fieldas. Type zgh pumps are of high-head ones. Construction of this pump is of single casing connected by means of clamp bands and wide wet pas- Sage.The wet-parts are made of ni-hard and high chromium abrasion-resistance alloys.The dischar- Ge direction of pump can be oriented in any direction of 360.This type of pump possesses the adv- Antages of easy installation and operation, good performance of npsh and abrasion resitance.
More detail specification construction design please contact us: sales77 AT cnmineralsequipment DOT com skype sales77.sme Quick Details Place of Origin: Hebei, China (Mainland) Brand Name: SME Model Number: SG/100D Theory: Centrifugal Pump Structure: Single-stage Pump Usage: Water Power: Hydraulic Standard or Nonstandard: Standard Fuel: electric Pressure: High Pressure Application: Maritime Slurry Pump Specification: Size range (discharge): 1¡¡À to 18¡¡À / 25 mm to 450 mm Capacities: to 22,000 gpm / to 5,000 m3/hr Heads: to 100 ft / to 30 m Pressures: to 300 psi / to 2,020 kPa Slurry Pump Construction Pump Body:Cast Iron/Grey Iron Front Cover:High Chrome alloy/ Rubber lined Impeller:High Chrome alloy/ Rubber lined Mechanical Seal:Carbon/Ceramic/Stainless Steel Motor Housing:Alloy Aluminum Shaft:Carbon Steel/Stainless Steel/High Frequency Wedding Shaft Insulation:Class B / Class F Protection:IP54 / IP55 Cooling:water cooling Advantage: 1. Heavy and robust centrifugal slurry pumps 2. Handling tough mining slurry 3. High quality slurry pump manufacture 4. One year warranty 5. Certificates: ISO CE SGS 6. OEM service supply 7. The shortest delivery time Slurry Pump Feature: The mining slurry pump is horizontal, single suction, single-stage, cantilever, double casing centrifugal slurry pumps. The discharge direction can be set at any one of 8 directions, and the angle interval of the 8 choices is 45¡ã. The shaft seal has three modes which are packing seal, expeller seal and mechanical seal. Slurry Pump Operation condition: Pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. Liquid temperature up to 90¡ãC Max.Pressure:12bar Slurry Pump Application: It is widely accepted in the fields of mine, coal, metallurgy, electric power, building material and others. In addition, products of this series are categorized as the abrasive resistance slurry pump due to the heavy base and wear resisting parts. WOODEN CASE
Item name: dp-430 Outlet:4" Head: 30~ 36m Output: 30 hp Capacity: 156 m3/h (40% solid pumping) Solid passing: 35 mm Weight: 750 kg
1. Sludge dredging pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. Such as dredging, suck gravel in the dredger, suck gravel in the course of rivers or lakes, delivering slurries in mining, explosive sludge in metal smelting.( type znh pumps are of high-head ones ) 2. Sludge dredging pump are widely used to dredger and dam in the rivers, ports and wharf over our country, such as changjiang river, huanghe river, liao river, and zhujiang delta. And also widely used abraoad, such as middle east, europe.
