Flyin optronics’ 1x2 mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. All flyin optronics’ 1x2 mechanical optical switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for optical network, protection, transmitter and receiver protection, network test system and instrumentations. Features Unmatched low cost Low insertion loss High channel isolation High stability, high reliability Epoxy-free on optical path Latching and non-latching Applications Optical network Protection/restoration Optical singnal routing Configurable optical add/drop Transmitter and receiver protection Network test system
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box
Product Characteristic >Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use >Inside the cable fixtures, splice and clamps >Fully enclosed, protecting >Suitable for outdoor armored, indoor soft cable >Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack >Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties >Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame >Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room. Â communication engine room, jumping fiber, cable and splice one access the essential equipment Technical parameters >Several coupled interfaces >Compact Optical is used for fiber splice, optical adjustment, cable protection and so on >The height 1U is suitable for Cabinet or rack >Conform to ISO/IEC11801 standards -
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
Selling optical fiber Performance indexes : Insertion loss0.1db Return loss Interchangeability Repeatability0.1db Plugging times Operating wavelength Operating temperature Storage temperature Features: Standards of iec, bell core Upc end-face finishing High return loss and low insertion loss High reliability and stability Applications: Fiber optic communication system Fiber optic catv Fiber optic test and measurement equipment Fiber optic backbone International standard packing
Fiber optic Description 1.Special two-layer tube technology for good flexibility and bend-resistant property. 2.Water-blocking compound filled up and all cross section double water-blocking. 3.Non-metal structure good electromegnectism resistant property, suitable for electric field and some areas where thunders usually happen. 4.Aramid yarn ensures the tensile strength performance. 5.Excellent water-proof layer, good moisture resistance. Application 1, suitable for both indoor and outdoor 2, long distance communication system 3, local area network system 4, subsiber network system Negotiate
Optical fibre
Hot Selling Best Price MEMS Gigabit Ethernet Mechanical Fiber Optical Switch
Product Explanation GHT Connector Box cable is production based on YD/T814.1-2004 standard, through a third partycertification, fully to meet and surpass these standards. This series applies to telecom networks, local are a networks, FTTx, TVs, test equipment, fiber-optic sensor CATV optical fiber and rescure, such as optical fiber transmission systems, achieve the middle joints, distribution, and protection of the realization of optical fiber cable line, doing a good job in a variety of harsh environments, and fully into account in the design of simplified operation, flexible configuration requirements. Product Characteristic >Housing made of high quality and special material, high strength, corrosion resistance, ageing resistance,  fire prevention, can be adapted to a variety of harsh environments >Made of high quality stainless steel screws and hooks, imported sealing, the sealing property is reliable >Horizontal or cap-style structure can meet the directly buried, pipelines(tunnel), wall-mounted or overhead installation environment >Leniency splice tray designed to ensure fiber bending radius �40mm, full protection device >Set the perfect fiber-optic fixed and strengthen the core, stripping, grounding protection device >Set the repeat opening device and embedded sealing strip, repeated opening convenient, labor-saving, good packing performance >Applies to both single-core and multicore and fiber, can support a manximun number of cores 288 cores >Operation and maintenance convenient and fast
Silica Quartz This company is the one of the leading manufacturers and exporters of silica quartz in lumps, grits and powder. These products are used as a basic raw material for semicoductor, fiber optic, glass, artificial marble and granite, epoxy, paint, refractory and ceramic industries.
Describe XH-FSW-24X24 matrix rack optical switches is a product that uses optical switches to realize optical path conversion. The device provides serial port RS-232 and Ethernet RJ45 interface, through the TCP/IP protocol connection to send commands to control optical path switching, and finally realize 24 (input) Ã?? 24 (output) full-switching non-blocking two-way fiber-optic routing Cross-connect plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems; optical testing systems are used for optical fibers, optical devices, networks and field engineering optical cables Testing; Optical device assembly and adjustment Features (1) Ethernet port, serial port communication interface command control. (2) full switching non-blocking two-way cross connection. (3) Equipped with LC Seiko flange, the insertion loss is small. (4) Small insertion loss, fast switching speed, high signal stability, no crosstalk on adjacent channels parameter Parameter Parameter Values Model XH-FSW-24X24-Q Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM 9/125um Lifetime 107 Switching Time 15ms(Adjacent channel) connector FC\PC control RJ45 RS-232 Operating power AC 100~240V Operating Temperature -10 ~ +60 Storage Temperature -40 ~ +85 Dimension 19 4U 483 X 600 X 178
1U Fiber Optic Patch Panel
Polyester Staple Fibre (PSF) is kind of Polyester Fibre made directly from PTA & MEG or PET Chips or from Recycled PET Bottle Flakes. PSF made from PTA & MEG or PET Chips is known as Virgin PSF and PSF made from Recycled PET Flakes is called Recycled PSF. 100% virgin PSF is usually more costly than recycled PSF and is also more hygienic. Polyester Staple Fibre is widely used in spinning and weaving non-woven.PSF is mainly used for fiber fillings in pillows and sofa. It is also used widely in spinning to make Polyester Spun Yarn which is then knitted or weaved into fabrics. PSF is mainly classified as Solid & Hollow Polyester staple fiber. Hollow PSF can also have some properties like Conjugated, Siliconized, Slick and Dry PSF. These properties are usually represented as HSC (Hollow Conjugated Siliconized), HCNS (Hollow Conjugate Non-Siliconized) or Slick PSF that has a smooth finish. Depending on the lustre, PSF can be classified as Semi Dull and Bright. By mixing color master-batch, dope dyed PSF can also be obtained in Optical White, Black and several colors. We can supply you best quality polyester staple fiber from manufacturers & suppliers in India, China, Taiwan, Indonesia, Vietnam, Malaysia, Korea. Polyester staple fiber virgin quality for spinning Polyester staple fiber 1.5,3 denier for spinning- high tenacity from US-Origin fibers produced from virgin and regenerated raw materials OPW-1.2 den x 38 mm (TIPOTI) SD RQ-1.4 den x38 mm & 1.2 den x38mm 0.8-28 dtex with different cut length Coarse types PZ 6.6 and polyester upto 500den White, optical white, dope dyed black and other colored fibers Solid and hollow fibers
Product Description Low Insertion Loss Multi-channel 1x8 Fiber Optic Switch-Introduction SUN-FSW-1x8 Optical Switch is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Features Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Applications R&D in Laboratory System Monitoring OADM OXC Wavelength Range : 850�?�±40 / 1300�?�±40; 1260 ~ 1650 Test Wavelength : 850 / 1300; 1310 / 1550 PDL : 0.15dB Return Loss : MM 30 SM 50 Insertion Loss : Typ: 2.2 Max: 2.5
Product Description GLSUN 1x2G Fiber Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Applications R&D in Laboratory System Monitoring OADM MAN (Metropolitan Area Network) Network Security and Monitoring
Product description Glsun d1x2 fiber optical switch - introduction Sun-fsw-d1x2 fiber optical switch, which is famous for its high performance, low insertion loss and compact dimension: (l)27.0x(w)12.6x(h)8.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Glsun d1x2 fiber optical switch features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application R&d in laboratory System monitoring Oadm Man (metropolitan area network) Network security and monitoring
Product description Glsun d2x2 fiber optical switch - introduction Sun-fsw-d2x2 fiber optical switch, which is famous for its high performance, low insertion loss and compact dimension: (l)27.0x(w)12.6x(h)8.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Glsun d2x2 fiber optical switch Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application R&d in laboratory System monitoring Oadm Man (metropolitan area network) Network security and monitoring
