PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments.
PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments. Product parameter-PVDF Coated Aluminum Coil Thickness: 0.18mm-1.6mm Usual Alloy: 1100, 8011, 3003, 5052, others alloy: according to your requirement. Per coil weights: 5MT Usual Width: 1200mm, 1240mm, 1270mm, 1520mm, 1570mm, others width: according to your requirments.
Brand Name : ANKEM Product Grade : AR/ACS Pack Size : 2.5Lit, 25Lit, 500ml
Aluminium Coil for Roofings PVDF Coated Aluminium Coil PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity. Key Features of PVDF Coated Aluminum Durability: PVDF coated aluminum is resistant to weathering, UV radiation, and corrosion, making it suitable for use in a variety of outdoor applications.
Aluminium Coil for Roofings PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF Coated Aluminium PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF FR906 is a white pellet of polyvinylidene fluoride homopolymer with low viscosity,which can be well fabricated into products by injection. Made from virgin PVDF FR906,properly processed PVDF fabricated products provide good mechanical properties,toughness, and highly resistance to acid,alkali,oxidant and halogen at room temperature. The porous film is stable to aliphatic hydrocarbon, aromatic hydrocarbon,alcohol and aldehyde.At at temperature above100 C, it shows high resistance to hydrochloric acid,sulfuric acid, nitric acid and alkaline with concentration below 40wt% in water. It is also stable to radiation and most bad environmental conditions, which lead to excellent performance for the long term. PVDF resin is mainly used in chemical equipment, electronic and electrical coatings and architectural coatings. In addition, because of its unique piezoelectric and thermoelectric properties, PVDF resin as a novel electrical functional material has become a hot spot in application research in recent years.
SpecFeature : Artistic CeilingsShape : RectangleType : Metal CeilingsKey Features ALUMINUM COMPOSITE PANEL The front side : Aluminum coated with polyester resin or PVDF resin. Core : Nontoxic low density polyethylene (LDPE). The back side : Aluminum coated with polyester resin or in mill finish. STANDARD SPECIFICATIONS Thickness : 2mm, 3mm, 4mm & 6mm Width : 1220mm, 1250mm, 1575mm 2000 mm Length : 2440mm, 3050mm & 3200mm (max.5meter) Additional colors are available upon customers`request. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin (PVDF) or polyester resin (PE) roasting painting b) Core: Normal PE Core (Fire class B2) / Fire Resistance PE Core (Fire class B1) c) Back: aluminum alloy sheet coated with protective film d) Aluminum alloy sheet optional thickness: 0.08mm, 0.1mm, 0.12mm, 0.15mm, 0.18mm 0.21mm, 0.3mm, 0.4mm, 0.45mm, and 0.5mm available. Dimensions: Standard size: 3mm*1220mm x 2440mm (Thickness x width x Length) or 4mm*1220mm x 2440mm Panel thickness: 3mm (usually for interior wall ) , 4mm (usually for exterior wall) Non standard sizes are available: width 730mm - 1550mm,length: maximum 6000mm --- Aluminum Composite Panel --- Introduction: Aluminum Composite Panel is made of the aluminum panel and polyethylene, the surface is painted with fluorocarbon resin and looks noble, elegant and beautiful. It widely uses in the wall system, advertisement and decoration.
PVDF BINDER(Chemical) from KOREA. Specification : NMP 92.0+-0.5 wt% PVDF 8.15+-0.15wt% Solubility(@800nm) >99.9 T%, A quotation will be estimated by Inquired Volume and package specification. Please contact me
Application Wire insulation, fittings, tubing, filtration housings, wafer carriers, pump housings, valve bodies, heat exchangers and other end use components requiring a high performance fluoroplastic material. Processing Everflon�® PVDF grades can be processed using techniques applicable to standard thermoplastics: * Extrusion * Injection, compression and transfer molding * Machining Items produced from all non-reinforced grades of Everflon�® PVDF can be easily assembled using standard welding methods, such as: * Hot air welding with welding rod * Butt welding * Heat-sealing * Ultrasonic * IR welding
FAL aluminum honeycomb panel is a new kind of aluminum composite panel and we adopt advanced continuous high-temperature compounding technology instead of traditional handmade producing method to produce this product. The surface of the FAL aluminum honeycomb panel is made of aluminum alloy sheets roller coated with PVDF while in the middle is an aluminum honeycomb which meets the international standards. The structural honeycomb core provides strength and consistent rigidity at a very low density; when bonded to similarly lightweight facings. Every honeycomb cell wall acts like the web of an I-Beam, forming an extremely strong and rigid lightweight composite panel. It is all made of aluminum which makes it extremely light in weight and environmentally friendly. And it is an ideal material for a most of applications in architecture, transport, display or industrial production. Standard Specifications: Length: within 10000mm Width: 1220mm or 1500mm Thickness:6.0mm,10mm,15mm,20mm,25mm (For special requirements beyond these standard specifications, we can discuss and decide with customer.) Surface treatment: PVDF/PE/Powder coating Shape & Color: As per project design/customers' request Structural Characteristics: 1.Strictly controlled quality updated fore-rolling coating with pre-baking finish process. 2.Surface finish: PVDF coating/ PE coating (options for color) 3.Large dimensional panels (Max 5000mm x 1500mm) 4.High strength no reinforcement measure necessary. 5.Precise dimension and roller-pressing technology, which ensure the high quality of the products. 6.Perfect installation system, which can eliminate the panel distortion caused by the temperature changes. Therefore, the sealing against the gas or water leakages will be ensured. The unique sealing installation system looks graceful in shape. Besides, it can effectively avoid the reduction of the lifetime of the sealing glues due to the direct radiation. Furthermore, the lower installation requirements will allow the panels to be installed on various keels. 7.Excellent productive capability irregular panels such as arc-shaped, folded and trapezoid panels will be designed and produced as per the special designing requirements. The non-plane irregular panels including arc shape, L-shape, U-shape are formed in one mould. 8.No color difference: The same lot roller-coated aluminum sheets are to be used for one project. Meanwhile the reasonable interior wall and ceiling installation will ensure each panel sheet to be easily and separately dismantled for maintenance service. Application: Building Curtain Wall Cladding, Indoor & Outdoor Decoration, Signboard, Partition and Display Platform.
Fal brand aluminum honeycomb panel is a new kind of composite panel which is produced with advanced continous high-temperature compouding technology introudced from german alhigerman. It is mainly composited of three parts: front aluminum sheet, central aluminum honeycomb core and back aluminum sheet. Product characteristics: 1. Low density, high intensity, high rigidity, stable structure 2. Outstanding flatness, superior weather-proof, wind-proof and pressing proof functions. 3.Good sound&heat insulation, good at shock-resistance 4.Easy to proccess and shape, easy to install 5.Green and enviornmetal, energy-saving material Product specification: Standard panel thickness: 6mm, 10mm, 15mm, 20mm, 25mm (1mm for skin aluminum sheet) Size: 1220 x 2440mm / 1500 x 3000mm(other size can be discussed with customers) Finish: pvdf coating(pe coating/mill finish is also available ) Color: as per customers' requirement Application: Bulilding curtain wall/façade/cladding, interior ceiling, partition wall, advertisement&signage board, container house, bodywork of commercial transportaion vehicle and container truck etc.
Grade 3000 Series Temper O-H112 Type Plate Application interior and exterior decoration,balcony,furniture,etc. Thickness 1.5--5.0mm Width 150--2000mm Surface Treatment Coated Alloy Or Not Is Alloy Place of Origin Zhejiang, China (Mainland) Brand Name Minida Colour red, white, blue, etc Wooden carton, wooden pallet, or as your requirement.
1)Alloy type 1100 or 3003 2) thickness Alloy: we can offer 0.25mm to 0.5mm 3) total thickness of ACP panel: 3mm, 4mm , 5mm, 6mm 4) Coating material: PVDF or PE 5) size for ACP: width we can offer 600mm to 1550mm 6) Color: we can offer various colors 7) Quantity: min order is 1000 square meters for each size and color
Aluminium composite panel Nano-photocatalysis coating can decompose the pelagic microbe & flowing organic materials , so that can be to kill and restrain the microbe, clean the air and protect the virus infecting , also the nano-photocatalysis coating can be self-cleaning. So now the nao-photocatalysis coating become welcome and popular in the construction materials field. Features: 1)excellent easy-cleaning 2)pollution resistance 3)oil resistance 4)good friction resistance 5)strong acid & alkali resistance 6)outstanding weather resistance 7)good self-cleaning characteristic Material: A) front: aluminium alloy sheet coated fluoro-carbon resin (pvdf) with nano lacquer B) core: nontox low density polyethylene C) back: aluminium alloy sheet coated with polyester resin painting D) surface coating thickness: 32µ±1µ E) aluminium alloy: 3003 h24 F) sheet thickness: 0.3mm, 0.4mm, 0.5mm Standard: A) west europe standard ( germany din standard); B) the east europe standard ( russian standard ); C) the commonweathlth standard (u.K bs standard ); D) the north america astm standard; Application: A) may be widely used in galleries, exhibition, saloons, stores, offices, banks, hotels, restaurants and apartments B) an ideal decorative materials for buildings C) an ideal outer and inner walls D) kitchen cabinets , billboards, signboards, tunnels, subway, interiors E) ceilings, eaves, galleries, balconies, partitions, interior decorations F) vehicle bodies, yachts, industrial usage etc.
Filtration of water-soluble oligomers and polymers,e.g. protein solutions Filtration of hydrophobic substances in different organic solvents Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
Low protein-binding for filtration of non-aggressive aqueous and mild organic solutions. Low UV absorbing extractables and low nonspecific protein binding. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm,25mm and 30mm.
1)Aluminum skin thickness: 0.08mm-0.50mm. 2)Total panel thickness: 2mm-6mm. 3) Width:1000mm,1220mm (regular), 1250mm,1300mm,1500mm 4) Length:Up to 6500mm; 5) Standard size:1220mm(Width) 2440mm(Length). 6)Surface Treatment:PVDF coating and PE coating. 7)Main aluminum composite wall panel Product:PE coated ACP,PVDF coated ACP,Nano PVDF coated ACP,Mirror finish ACP,Brushed ACP,Wooden ACP,Granite ACP and Fireproof core ACP. 8) Non-standard sizes and special colors are available depending on customersâ?? offers. 9)thickness of film:0.07mm/0.09mm 10)4700sqm/20GP 11)PE core or Fire-rated Core
Product Description PVDF resin, a polyvinylidene fluoride polymer prepared by an emulsion process. Its high purity, with excellent chemical corrosion resistance, oxidation resistance, radiation resistance, and good mechanical properties, is suitable for architecture-grade film application and to be molded into pipe fittings, pumps and valves, and other parts of various specifications. Density g/cm3 1.77-1.79 Water content Wt% 0.10 Durometer hardness Shore D 74 80 MFR230 5kg g/10min 626 Tensile breaking strength 25 Elongation at break % 20 Tensile Strength, Yield 25 Elongation at Yield % 10 Melting Point 165 170 Thermal decomposition temperature 370
PVC PP PVDF Diaphragm Seal For Pressure Gauge are designed to protect and isolate pressure gauges and expensive instrumentation from corrosive, high temperature, or viscous, process media. PP PVDF PVC Diaphragm Seal Features Transfers process pressure accurately without direct contact with process fluids Removes the need for expensive instrumentation Easily installed and available in three chemically resistant Materials of Construction Optional Diaphragm Materials Bottom Connection Sizes in FNPT & BSPT Female Connection Types Thermoplastic Units Rated to 240 PSIG (16 BARG) 21 C (70 F) 316L S/S Units Rated to 5800 PSIG (400 BARG) 21 C (70�°F)
