Digital Control Technology--LCD Display Low frequency pure sine wave inverter - single-phase interactive uninterrupted power supply- high quality Function: 1, Auto Voltage Regulation(AVR): When utility power is unstable, this machine owns precise and stable voltage output function. For example, in China, the utility voltage can drop to 190V at peak demand, but the output voltage of this machine is 220 V, 3% V, 50 Hz, 0.5, which can help to protect electrical equipment. 2, DC/AC Conversion Function: When the utility power fails suddenly in the home, office, supermarket and industrial zone etc, it can be an environment-friendly engine; in some outdoor areas without electricity, it can be used as Mobile Power and provide AC power for household appliances. 3, Intelligent Charging Function:. When batteries run out of power, inverter can be connected to the utility and automatically charge the battery. When connected with utility and battery, it could be used as a UPS system and will charge batteries automatically when connected with utility, The charging process can be divided into three sections. Section I: With largest constant current charging, this can improve the backup power. Section II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided. Section III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. 4. UPS Function: When this inverter connected with batteries and utility, inverter will start its UPS function. The output UPS of the inverter can be choose as AC first(utility comes first) or DC first(DC power first).The transfer time is less than 5 milliseconds. Features: 1, Pure sine wave AC output; 2, Intelligent program control, CPU management; 3, With LCD display, users can know operation status of the whole system clearly; 4, With multi-functions, extra charger is not needed and electric appliances can be protected (AVR, UPS); 5, Wide applicable scope, can be wide used for all kinds of occasions, such as outdoor area without electricity, industrial area, household, office, supermarket, hospital, bank, solar system, wind energy systems etc; 6, With external battery connection, its convenient for users to expand use time and back-up power time; 7, With super load carrying ability and high load capacity, this inverter can not only carry resistance load; but also can carry various kinds of inductive loads, such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp, etc; 8, With high quality, low frequency circuit design, stable system, low failure rate and long service life normally under proper operation, this machine can last more than 3 years; 10, Approvals: CE / EMC / LVD/ RoHS ; 11, Two years warranty, lifelong technical supports. Technical Specification: I-P-XD-15000VA Rated output capacity(Full Power) 10000W Peak Power 20000W Battery voltage(DC) 96V or 192V (Optional) AC Input Voltage(AC) 220V, 35% or 110V+35%(Optional) Frequency 50Hz, 3% or 60Hz, 3% Output(AC) Voltage 220V, 3% or 230V, 3 or 240V, 3% or 100V, 3% or 110V, 3% (Optional) Frequency 50Hz, 0.5 or 60Hz, 0.5(Optional) Charge Battery Charge circuit 0~25 A Charge time By the capacity of battery Battery protection Automatic self-test. charge and discharge protection Display Mode LCD Information Input voltage, Output voltage, Frequency, Battery capacity, Load capacity State parameters Output wave type Pure sine wave (Waveform distortion 3) Overload capacity 120% 60s,130% 10s Inverter efficiency Average 90% Transfer time 5ms Communication port RS232 Protection function Output overload protection, Output short-circuit protection, Battery reverse polarity protection, Input high-voltage protection , Input low-voltage protections, Overheat protection; Using environment Temperature -10 ¡«60 Humidity 10%¡«90%,Non-condensing Altitude 4000m Size W, D, H(mm) 570*265*600. Packing size W, D, H(mm) 660*350*750 Net weight (kg) 78 Gross weight (kg) 88=78+ 10 (wooden case).
Rated Power 300W Peak Power 600W DC Input Voltage 12V AC Output Voltage 110V/220V AC Output Frequency 50Hz/ 60Hz Waveform Pure Sine Wave Wave Distortion 3% Efficiency 92% DC Link Binding Post Pure Copper Terminal AC Link Single Dual Triple Receptacles Protect Function Short Circuit Over load Over Voltage Under Voltage Over Heating Shut Down Starting Method Soft Starting Cooling Method Intelligent Cooling Fan Working Temperature 10 50 Storage Temperature 30 70 Humidity 20% 90% Item Net Weight Gross Weight 1kg 1.3kg 1.1kg 1.5kg 2.9kg 3.6kg Item Size 230 105 85mm 230 105 85mm 340 165 85mm Packaging Size 260 155 105mm 260 155 105mm 390 235 155mm Warranty 2 Years
3 Phase off-Grid Pure Sine Wave Inverter Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements.
1KW-6KW DC AC Pure Sine Wave Inverter Charger for Home Using 1) Pure sine wave 2) AC smart charger 3) 300% surge power 4) Configurable AC/Solar input priority 5) 30A/70-90A max. AC charging current 6) Compatible to mains voltage or generator power 7) LED/LCD Smart Remote Control (RMT) (Optional) 8) DC start and automatic self-diagnostic function 9)Low DC voltage supports home and office appliances 10) High efficiency design and “Power Saving Mode” to conserve energy 11) 13 VDC battery recover point, dedicated for renewable energy systems 12) 8 pre set battery type selector plus De-sulphation for totally flat batteries 13)15s delay before transfer when AC resumes, protection for load when used with generator
Origin china Model number Cw3000 Brand name Cross world Input voltage Dc12v or 24v or 36v or 48v or 110v or 220v Output current 27.27a or 13.64a Output frequency 50hz or 60hz Output power 3000w Output type Single Output voltage 110v or 220v Size 330*200*145 (mm) Type Dc/ac inverters Weight 7 kg Output efficiency A maximum of 94% Peak power 6000w Waveform distortion £¼3% No-load current
SPT Series inverter design for American market, suit for home applicance, office equipment, solar power system, and other equipments. FEATURES Pure sine wave output, available for sensitive load. Accept generator's energy output. Suit for American 2P3W system, 120/240V. 3-step progressive charging logic, support various battery type in market. Automatically transfer between battery and AC line modes. Provide bypass without battery connected. Optional remote control function.
OPT Series inverter suit for home applicance, office equipment, solar power system, and other equipments. FEATURES Pure sine wave output, available for sensitive load. With grid mode / energy-saving mode / battery mode. Wide range voltage input, suit for different country city grid Support various battery type in market. Automatically transfer between battery and AC line modes. Optional remote control function.
12V Dc To 220V Ac 1000W Pure Sine Wave Power Inverter/Converter What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source. Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-1000P Output AC Voltage 100-120V/220-240V AC Rated Power 1000W Surge Power 2000W Waveform Pure Sine Wave USB port 5V 2.1A 5V 2.1A 5V 2.1A 5V 2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 31.1*16.8*9.6cm(L*W*H) N.W(KG) 2.55kG G.W(KG) 2.9kG Warranty 2years
2000w DC pure Sine wave power inverter. -
Pure sine wave power inverter with built-in charger and auto transfer switch (range from 300w to 3000w) Special features: 1. Soft start&external fuses 2. Usb&remote control 3. Three stage battery charge: bulk/absorption/float charge 4. Temperature and load controlled dc fans 5. Protection: led indicator light& audible alarm 6. Ce and rohs approved Inner box and carton
1. Soft start and external fuses 2. 1.5 times rated power for 10s, 2 times continue for 2s 120%
1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan
Features: • protection : • input low voltage • overload • short circuit Specification : Specification Model no. Item Sk1000-112 Sk1500-124 S1500-148 Sk1500-212 Sk1500-224 Sk1500-248 Rated output power 1500w Input voltage 12v 24v 48v 12v 24v 48v Output voltage 100 / 110 / 120v ± 3% Frequency (switch selectable) 50/60hz +/- 0.05% Peak output current 25a 11a Efficiency (full load) 85% 87% 88% 86% 89% 90% No load current draw 1.5w saving mode Output waveform Sine wave
4000W pure sine wave car power inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source. Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-4000P Output AC Voltage 100-120V/220-240V AC Rated Power 4000W Surge Power 8000W Waveform Pure Sine Wave USB port 5V 2.1A 5V 2.1A 5V 2.1A 5V 2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 54*25.5*10.3cm(L*W*H) N.W(KG) 8.9kG G.W(KG) 10.0kG Warranty 2years
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter�¢??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer�¢??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
Specification Sr-300-s sr-300-s-12vsr-300-s-24v "output Rated power300w Maximum output poweload 120~150%(3min.);2003sec) Ac voltage100~120vac / 200~240vac (optional) Frequency50h0.1% or 60h0.1% (optional) Waveformpure sine wave output (thd
Product Introduction SANDI Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Product Details: Place of Origin: Zhejiang, China (Mainland) Brand Name: Yom Model Number: CZ-3000S Output Power: 3000W Output Type: Single Phase Machine Size: 42.5*21.7*15.3cm Machine Weight: 9.75kg Efficiency: 90% Cooling Way: intelligent Cooling Fan Certificates: CE & RoHS & ISO9001 On/Off Grid: off grid Waveform: Pure sine wave Working Temperature: -30C~+50C AC Regulation: THDC3% Protection: .Buzzer alarm .Soft start .Reverse polarity .Grounding protection .Over-load protection .Low-voltage protection .Over-voltage protection .Short-circuit protection .Over-temperature protection .Auto reset after being in protection 1pcs/box, unit box size 57*31*26cm,N.W 9.75kg, G.W10.75kg 1pcs/CTN,unit CTN size 59*33*28,G.W11.8kg
Product Details: Place of Origin: Zhejiang, China (Mainland) Brand Name: Yom Model Number: CZ-4000S Output Power:4000W Output Type: Single Phase Machine Size: 42.5*21.7*15.3cm Machine Weight: 10.25kg Efficiency: 90% Cooling Way: intelligent Cooling Fan Certificates: CE & RoHS & ISO9001 On/Off Grid: off grid Waveform: Pure sine wave Working Temperature: -30C~+50C AC Regulation: THDC3% Protection: .Buzzer alarm .Soft start .Reverse polarity .Grounding protection .Over-load protection .Low-voltage protection .Over-voltage protection .Short-circuit protection .Over-temperature protection .Auto reset after being in protection 1pcs/box, unit box size 59*33*28cm,N.W 10.25kg, G.W12.4kg
