High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
Material characteristics: 1, white, odorless, tasteless, non-toxic powder, commonly known as "plastic king". 2, the active hydrogen atoms on the ethylene monomer are replaced by inert fluorine atoms, and the polytetrafluoroethylene monomer is polymerized. 3, temperature resistance, the operating temperature of -100â??-250â??. 4, high strength weather resistance, radiation resistance and low permeability. 5, non-adhesion, is the smallest surface tension in solid materials, does not adhere to any substance. 6, non-toxic, with physiological inertia, as artificial blood vessels and organs long-term implantation in the body without adverse reactions.
Fiberglass really is made of glass similar to that in windows or kitchen drinking glasses. To manufacture fiberglass, glass is heated until molten, then forced through superfine holes. This creates glass filaments that are extremely thin so thin, in fact, that they're best measured in microns
Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by resin casting. With its many rectangular and square spaces, it provides two-dimensional homogeneous mechanical characteristics. The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh sizes and thickness - Advantages - Easy to assemble - High Load-bearing capacity - Easy to install and maintain / repair - Durable in harshest environments - Suitable for ventilation and natural lighting
We at BDMG, provide PTFE Teflon Tapes for electric insulation purpose or for release film. PTFE Tapes are available in any required width 6 mm to 150 mm and in any required thickness 0.003 to 0.025 inch as per the customer needs.
Dolomite mineral is a double carbonate of calcium and magnesium and it exhibits a granular structure. It has high natural whiteness and it's noted for their ease of dispersion. Its use improves properties such as weather ability, reduces shrinkage, fissure development and water absorption. Natural Dolomite Powder is of White Colour and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. Applications: - Soap & Detergent Leather Cloth Industry Cable Industries Rigid PVC Pipes Iron, Steel, and Ferro-Alloys Industries Paints, Inks, Powder Coating Ceramic Industry Rubber Industry Glass Industry Available Mesh Size: - 100 TO 700 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 92 TO 96 AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 10.41 % 2. Alumina - (AI2O3) 01.15 % 3. Iron - (Fe2O3) 00.21 % 4. Titanium - (TiO2) 00.18 % 5. Calcium - (Cao) 30.02 % 6. Magnesium - (MgO) 18.41 % 7. Soda - (Na2O) 00.34 % 8. Potash - (K2O) 00.07 % 9. Loss on Ignition - (LOI) 38.91 %
Specialties: 1. PTFE Teflon, Architectural Membrane Materials 2. PTFE Teflon, Coated Glass Fabrics 3. PTFE Teflon, Coated Open-Mesh Glass Fabrics 4. PTFE Teflon, Coated Glass Fabric Adhesive Tape 5. Silicone Coated Glass Fabrics
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge. Products series : Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean Tempered raindown/nashiji pattern glass The pattern bring distinctive decorative on glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning Tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Tempered low iron glass High light transparent with colorless appearance The glass blue edge makes the whole shower enclosure in high grade Tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
Type Single Sided Feature Heat-Resistant Use Bag Sealing Adhesive Silicone Films Tapes are made with BOPP/Polyester/PVC/LDPE/PTFE film coated with single and double side adhesive layer according to application. Features: Good insulation property, Water and chemical resistant, Longer life and good strength. Usage: Polyester Tapes with single side adhesive coating are used as insulation in electronics and electrical industries. Special adhesive coated Polyester tapes are used as holding tapes in all electronic appliances. PTFE-Teflon coated with silicon adhesive can be used for non stick application in all printing and lamination industries
Inflatable stand up paddle board descreption: 320x78x15cm Adult inflatable SUP, surf paddle board for water sport with accessories Specification detail: Brand: seaskating or OEM Model: SUP-10â??6â??â??/320cm Size: 320*78*15cm /10â??6â??â??â??x31â??â??x6â??â?? Net Weight: 16~20kg Max Barometric value: : 25 PSI Displacement: 310 L Bearing Weight: 300IBS / 135kg Packing size: 89x55x19cm Product Accessories: 1xHigh-pressure inflatable hand Pump 1xStorage Bag 1xFin System 1xRepair kits 1xAdjustable Aluminum Paddle Min order 20pcs Features: Light weight. Fordable design, convenient to carry and keep. Easy inflate and Deflate. Large non-slip walk able pad. Import the materials and accessories, ensure have good quality, we provide 3 years warranty. Body Construction: Drop Stitch Material, Reinforced layer: PVC coated fabric. Anti Skip Pad: Super soft EVA, UV resistant. Skilled worker more than 4 years experience. We are Original manufacturer for more then 10 years experience of all kinds of water sport boat, stand up paddle board, paddle boat, RIB boat, Fiberglass boat, fishing boat, speed boat, rescue boat...we can customized the size, color, design and logo for you. Please contact us.
Material PE Brand SuperStick Color Transparent Length Customized Feature Water Proof Packaging Type Roll Core Size 3 Inch Design Plain Is It Customised Customisation Adhesive Acrylic Feature Antistatic Filament Tapes are made with Fibre Glass Reinforce backing made up of Polyester Film with Glass Yarn, Coated with Solvent Based or Hot melt Rubber Adhesive. Application: Heavy duty packing. Bundling and strapping of metal coils. Pipes and tubes temporary Holding parts. Appliances in house hold and electric appliance manufactures. There are two kind of backing available: Straight line fiberglass (mono) Mesh fiberglass (cross)
Our main products include high-temperature resistance Silicone Coated Fabric, PTFE Coated Fabric, PTFE Adhesive Tape, Skived PTFE Tape, Non-stick Baking Mats, PTFE Mesh Belts, PTFE Seamless Fusing Belts, PTFE Seamless Sealing Belts, PTFE Architectural Membrane Materials and so on. Our products have superior capability of high strength, high-temperature resistance, excellent chemical resistance to acid, salt and alkali, anti-bending fatigue resistance, smooth surface and good insulation, and are also antistatic, breathable, non-adhesive and non-toxic. Now they are widely used in fields like food packaging, paper printing, electronic appliances, textile, machinery, manufacturing, wood processing, plastics, garment processing, environmentally-friendly pharmacy, coal, metallurgical, chemical anti-corrosion and so on. .
Usage/Application Mounting Type Double Sided Usage Packaging Adhesive Rubber Material Cloth Use Masking We made this Double Sided Tapes Paper, Plastic Film and Foam carrier which is coated with Acrylic/Rubber/Silicon adhesive coating depends upon the surface to be bonded, application period and temperature resistance required. Application: Foam and Felt lamination, Splicing of paper/film and metal coils. Mounting of metal/paper/plastic/glass/mirror in automobile industries, appliance manufacturing, aerospace industries, construction (metal facade, curtain wall, Glazing & cladding). Metal coils manufacturing, paper industries, Printing Industries, leather-cloth industries and signage industries.