Heating system:
Thermosyphon (passive)
Connection type:
Direct-plug
Installation:
Roof mounted
Housing material:
Coated steel
Certification:
Ce
Capacity:
165
Place of origin:
Zhejiang china (mainland)
Brand name:
Jinyi & oem
Model number:
Jng5818-15
Out tank material:
Coated steel
Out tank diameter:
470mm
Out tank thickness:
0.4mm
Inner tank material:
Sus304-2b
Inner tank diameter:
360mm
Inner tank thickness:
0.4mm
Tank insulation pu foam:
High density
Tank insulation thickness:
55mm
Vacuum tubes length:
1800mm
Support bracket material:
Galvanized steel
Packaging detail:1. Cartons: 4ctns 2. Pallet: (charge by extra)
1. The outer tank: Color Coated Steel, thickness 0.4mm.
2. The inner tank: SUS304/2B, thickness0.5mm.
3. The warm keeping layer: polyurethane foaming 55mm.
4. The bracket, Galvanized Steel, thickness 1.5mm
5. Vacuum tube: 47-1500 or 58-1800, Two layer.
6. Angel of bracket: as your need.
Model: UNP-S02 Series
Type: No pressure
Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36
Tube Size: 58*1800 1.95kgs
Tank Capacity: from 80L to 300L
Material: Stainless steel
Bracket: U type and 1.2mm thickness
Model: IRA-HP58/1.8-20
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.5mm thickness of galvanized steel material,45degree.
Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2.249m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 24 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 240L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-12
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Characters:
1) Easy Maintenance
No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system.
2) High Performance
With the cutting-edge vacuum-tube collecting technology, over 92% of sunshine energy is converted to thermal energy for heating and no circulation loss. Thicker insulation layer, functioning well in winter, even in minus-30-degree environment.
3) High Reliability
System is simply working with the city net water, without pumps. Inner tank made by stainless steel SUS316-1.2mm. Working with high pressure, directly connected to running water, automatically functioning. With T/P valve and exhaust valve, it protects the tank from shrinking.
4)Year-round Operation
With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days.
Principle:
When vacuum tube absorb solar energy and heat the heat pipe ,the working fluid vaporizes and rise to the top of the heat pipe condenser, when heat pipe condenser meet cold water and cool down, the
working fluid will fluidity and return to the bottom of the heat pipe, so once and once again to repeat this process.
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer:polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800.
6. Tank capacity:70-400l.
7. Assistant tank heating element, mg rod, reflector and controller can be provided.
Characteristic:
1. Operated completely automatic if connect with intelligent controller.
2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance
Working principle:
* The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.
* When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
* The circulation pump makes heat-conducting liquid circulate automatically.
* The heat-conducting liquid transfers heat to water by heat exchanger in the water tank.
* In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.
* If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically.
Features:
* Collector separates with the storage tank. The tank can be put anywhere of the house.
* Module design, arbitrary combination, harmony with the building perfectly.
* Intelligent control and automatic operation.
* Anti-freeze: No water inside the tubes when it works.
* The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Key specifications:
* Heat-collection tube: High borosilicate3.3 glass with copper pipe
* Inner tank: With enamel layer (2.0mm)
* Outer tank: Colored steel: 0.5mm
* End Cover of Tank: Colored steel (0.5mm)
* Frame: Stainless steel 301
* The material of insulation: Polyurethane Foaming 50mm
* Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220v, 50Hz)
* Safety Valve: Brass valve (1/2")
* Controller: Circulation pump, Joints and other valves
156332 Pressure Solar Water Heater Suppliers
Short on time? Let Pressure Solar Water Heater sellers contact you.
