Pneumatic Actuator Bleed Valve 4V220 08 Suppliers and Manufacturers

Cast Iron Motorised Butterfly Valve IS 13095, BS 5155 Pressure Rating : PN-1.6 Material : Cast Iron Description : Wafer Type, Centric Disc Disc : Ductile Iron / Stainless Steel Ends : Wafer Type, Lugged, Flanged Operator : Electric Actuator Item Code : CI00091E Size : 40mm Notes : Available Valve Size : 40mm to 400mm

Cast Iron Lubricated Taper Plug Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Regular Pattern Top Entry, Pressurised Lubricated Feed Ends : Flanged Operator : Wrench, Gear, Pneumatic, Electric Item Code : CI000025 Size : 15mm Notes : Available Valve Size : 15mm to 200mm

Cast Iron Butterfly Valve BS 5155 Pressure Rating : Class-125 Material : Cast Iron Description : Wafer Type, With Lugs, Centric Disc Disc : Ductile Iron / SS 304 / SS 316 Seat : Moulded EPDM, BUNA-N, Neoprene, Viton Ends : Lugged Operator : Lever, Gear, Pneumatic, Electric Item Code : CI000029 Size : 40mm Notes : Available Valve Size : 40mm to 400mm

Cast Iron Butterfly Valve IS 13095, BS 5155 Pressure Rating : PN-1.6 Material : Cast Iron / Ductile Iron Description : Wafer Type Disc : Ductile Iron / SS 304 / SS 316 Seat : Moulded EPDM, BUNA-N, Neoprene, Viton Ends : Wafer Type Operator : Lever, Gear, Pneumatic, Electric Item Code : CI000091 Size : 40mm Notes : Available Valve Size PN-16 40mm to 400mm PN-25 40mm to 400mm

Cast Steel Lubricated Plug Valve Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Short Pattern, Lubricated Plug Ends : Flanged Operator : Wrench, Gear, Electric, Pneumatic Item Code : CCS00013 Size : 25mm Notes : Available Valve Size : Class-150 25mm to 200mm Class-300 25mm to 200mm

Cast Steel Butterfly Valve Pressure Rating : PN-10 Material : Cast Steel (WCB) Description : Wafer type, Centric Disc Body Seat : Moulded EPDM, BUNA-A, Neoprene, Viton Ends : Wafer, Lugged Operator : Lever, Gear, Electric, Pneumatic Item Code : CCS00014 Size : 50mm Notes : Available Valve Size : PN-10 40mm to 400mm PN-16 40mm to 400mm PN-20 40mm to 400mm Material : CF8, CF8M, CF3, CF3M etc.

Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability. As fly ash contains aluminous and siliceous components, it may form cement when mixed with water if the calcium content of the fly ash is high enough. Similarly, mixing fly ash with lime and water can create a substance similar to Portland cement. Fly ash can be separated into two main types, known as: Class F Class F fly ash contains particles covered in a type of melted glass allowing it to reduce the risk of concrete expansion and increase resistance to sulfates and alkali-aggregate reactions. Class C Class C fly ash contains a higher percentage of calcium oxide, making it more effective in strengthening structural concrete. Applications & Benefits of Fly Ash: Fly ash is used in commercial and industrial sectors for improving the durability and workability of concrete mixes. Fly ash is also used as filler in paints, adhesives, and metal and plastic composites. It's commonly used as structural fill for road construction and fly ash can be used to make bricks, ceramic tiles, plaster, Portland cement, and ready-mix cement.

Microsilica (silica fume) is a by-product of silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. Physical characteristics: Color: gray or gray white powder Bulk density: 320-700 kg/m3 Chemical composition: Items SiO2 Al2O3 Fe2O3 MgO CaO Na2O Moisture Content 75-98% 1.0-0.2% 0.9-0.3% 0.7-0.1% 0.3-0.1% 1.3-0.2% Fineness: the fineness of the silica fume is less than 1 1/4m, and the average particle size is 0.1 0.3 1/4m, and the specific surface area is 20 - 28 m2/g. The fineness and specific surface area are about 80-100 times of cement and 50-70 times of fly ash. Maxtech Micro Silica supplies will be as per QCS 2014 (ASTM C1240): SiO2: >/= 92% LOI:

GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.

Microsilica (silica fume) is a by-product from silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. White Cement advantages: Sustainability: Solar Reflectance Index (SRI): Floors finished with white or pastel color concrete will have a much higher SRI than floors with gray concrete, therefore they will reflect light better, and generate energy savings for the lifetime of the floors. Reduction of Heat Island effect: By constructing buildings with white concrete roofs or light-colored roof tiles, the Heat Island Effect is reduced from surfaces generating less heat and improved reflectivity. Architectural Concrete: White Portland Cement is ideal for decorative concrete and Architectural Concrete applications, Masonry and Cementitious Building Products. A key advantage of using white cement for these applications is that it provides a base color that can be tinted to custom colors to meet any color spectrum demand.

Pozzolan is a siliceous or siliceous and aluminous material that in itself possesses little or no cementitious value but will, in finely divided form and in the presence of moisture, chemically react with calcium hydroxide at ordinary temperatures to form compounds having cementitious properties. It is therefore classified as a cementitious material. There are both natural and artificial pozzolans. The quantification of the capacity of a pozzolan to react with calcium hydroxide and water is given by measuring its pozzolanic activity.

Panel meters Cam switches Contactor Control stations Counters Hazardous area control gear Limit switches Manual motor starters Monitoring relay Overload relays Plug-in relays Push buttons & indicators Temperature & process controller Timers Plastic, sheet steel & stainless steel enclosures

Variable frequency drives Motors Motor controllers Pulleys Belts Bushes