BZ model floor mounted jib crane(Pillar crane) is a small and medium-speed lifting equipment developed recently, it includes crane arm, support pillar and wirerope electric hoist. It has characteristics of unique structure, safe and reliable operation, high efficiency, energy saving, time saving,effort saving and flexibility. The floor mounted jib crane can be operated under three-dimensional environment. It is superior in the cases of short distance,concentrated lifting. This floor mounted jib crane is widely used at various sites for various trades. The capacity: 0.25T, 0.5T, 1T, 2T, 3T, 5T. Max. working range: 2m~6m.
MH model single beam gantry crane(box frame gantry crane) is matched with CD1 or MD1 model wire rope electric hoist, it is a kind of track travelling mid-duty type gantry crane, the main beam and legs are manufactured by plate steel, the frame is box frame, the capacity are from 3t to 32t, the span from 7.5m to 35m, the working temperature within -20--+42 centigrade, the duty class is A3~A4. This single beam gantry crane is commonly used gantry crane, it be used in outside warehouse for loading/unloading and lifting material. Both ground control and cabin control.
MG model double beam gantry crane with hooks is applied in outside plant or railway sideways to conduct common lifting and loading unloading works. This double beam gantry crane is composed of two beams, four support legs, crane travelling systems, trolley and electric equipment. The frame of beams and legs adopts box-type welding mechanism. The crane travelling mechanism adopts separate drive. All mechanisms are operated in the driver's cabin. Power supply of crane adopts cables and sliding wires, select one when ordering. The MG model gantry crane is heavy duty type crane, the duty grade are A3~A6, the capacity from 5t to 250t, the span from 7.5m to 35m, the standard lifting height are 6m, 9m and 12m, the temperature of working environment within -20~+42 degree.
CD or MD model wire rope electric hoist is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions. MD model wire rope electric hoist have normal and slow lifting speeds which make it lift steadily and accurately. CD&MD model monorail wire rope electric hoist can be widely used to hoist heavy objects, or installed on the straight or curve I-section steel beam or single beam overhead cranes or single beam gantry cranes. They can also be used together with electric hoist type double beam overhead crane or Double beam gantry cranes or jib cranes. All the above has made the electric hoists common in industrial and ore enterprises, railway, wharfs and warehouses. Capacity: 0.5T, 1T, 2T, 3T, 5T, 10T, 16T, 20T. Lifting height: 6m, 9m, 12m, 18m, 24m, 30m, and Max. 100m.
Engine Crane
Production description European single girder overhead cranes have such design concepts as small dimension, light weight, energy-conservation and environment protection. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height higher that increases effective working space of workplace, are widely used in machinery production, assembling, petrochemicals, electric power, construction, paper making, railways building, etc. Safety & Mechanical Features 1.European single girder overhead crane is compact lifting machinery designed and manufacturing in the strict according with FEM, DIN and ICE standard, compared with general overhead crane (bridge crane), weight is reduced by about 15-30% of common crane, max wheel pressure is reduced by about 10-30%. Have less requirement to the workshop structure, reduce production cost. 2.The frame of crane beam is square box frame, it is made by Q235 or Q345 steel plate, it has smaller body to get more lifting space. 3.Motor adopts Insulation grade F, protective grade IP54, it shall also have over heated and alarming function, the motor cover adopts aluminum alloy to drawing the molding, with better heat dissipation. 4.Germany reducer, Harden face gear, improve the bearing ability, better sealing of the shell, ensure there no grease penetration 5.Bridge crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill, cement plant, fertilizer plant, paper mill, chemical industries, etc. Wheel material: ZG430-640 cast steel, 60#, 65$ 65Mn, 42CrMo, 45# or according to your demand. 6.Main electric elements adopts the international brands include Schneider, Siemens, ABB. The protective grade of electric control box shall not less than IP54. 7.This overhead crane(bridge crane) has several safe protection functions, such as up/down limit switch, overload protection, low-voltage protection and long traveling limit switch, and the cross and long traveling motors have soft start function, the crane is very easy to use. 8.This overhead crane(bridge crane) is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. 9.The all motions of this overhead crane are double speeds, the lifting motor is double speed type, the cross traveling motor and long traveling motor are controlled by frequency inverter.
High quality Electric Double Girder Overhead Bridge Crane 30 ton, 35 ton, 50 ton This bridge crane is applied to transfer, assembly, check and repair as well as load and unload at mechanicprocessing workshop, subsidiary workshop of metallurgical mill, warehouse, goods yard and power station. they can also be used instead of common doublegirder overhead crane at production workshop in light textiles or food industry.
High Quality Single Grider Bridge Crane Overhead Crane With Best Price LDA type crane is the most popular crane for workshop. It is designed and manufacturing on the basis of LD type crane which has more reasonable structure and lighter in weight. This crane belongs to light duty crane, can be used with CD1 and MD1 hoist. Lift capacity is from 1 ton to 16 tons, suitable for 7.5m to 28.5m. It works indoor under the temperature -25°C to +40°C, humidity not more than 85% (ambient temp is 25°C). Its working condition is A3-A5.This type crane is commonly used in mechanical production workshops, assembling production line, warehouse and cargo yard, forbid to be used in humidity over 85%,corrosive and explosive places. It cannot be used to handle melting metals and toxic, flammable dangerous materials. Controlling can be ground operation or cabinet operation, the cabinet divided into close one and open one, it can be installed at the left or right side up to different conditions.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Electric hoist, winch, gantry crane, jib crane, overhead bridge crane,, water fitters, oil filters, hydraulic filters.Repair, manufacturer and shipping
Crane, overhead crane, bridge crane, gantry crane, portal crane, electric beam crane.
QD Double Girder Hooks Overhead Crane Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QB model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Single beam or double beam overhead crane, bridge crane, gantry crane, jib crane, electric hoist, eot crane.
Mini spider crane is widely used in narrow space such as car engine workshop equipment maintenance, electric power maintenance, chemical workshop inspection maintenance, building curtain wall installation, the construction of high-speed rail station, and cemetery stone industry situations. It can also be used for ice breaking in the marine. The engine can be petrol or diesel engine. Maimum working radius: 8.3m*0.14t Maximum ground lifting height: 9.2m Hook speed of winch: 6.5m/min Rope of winch: d7.7mm*45m Boom of telescopic system: full automatic 5 section Boom length: 2.56m to 8.92m Telescopic length / time: 6.36m / 26sec Boom angle / time: 0 to 75 degree per 14sec. Slew angle / time: 0 to 360 degree per 40 sec. Continuous slewing
Normally, single girder gantry cranes are most widely used and often in open storage yard. load capacity: 3~16tons span: 12~30m travelling speed: 20 or 30m/min lifting speed: 8 or 0.8m/min working temperature: -20~+40 control model: padent control or remote control applications: widely used in open storage yard duty group: class C or D To ensure the safety, our cranes are equipped with: Crane traveling limit switch. Weight overload protection device. Lifting height limit device. Voltage lower protection function. Phase sequence protection function. Emergency stop function. Rain cover for outside hoist, driving units, electric cubicle. Warning indicator: flashing lights and warning sounds. Wireless infra-detector for anti-collusion. We also manufacture Light crane includes four levels A1 to A4. Single girder bridge crane 0.5 t / 1 t / 2 t / 3 t / 5 tons / 10 tons / 16 tons / 20 tons. Medium crane includes two levels A5 to A6. Single girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 30 tons. Single-beam gantry crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons /40.5 tons / 50 tons / 60 tons / 75 tons / 100 t / 150 t. Heavy duty crane includes two levels A7 to A8. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 74 tons / 75 tons / 80 tons / 100 t / 125 t / 140 t / 150 t / 160 t / 180 t / 200 t / 225 t / 240 t / 280 t / 300 t / 320 t / 350 t. Single-beam gantry crane 10 tons / 15 tons / 20 tons / 32 tons / 40 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 75 tons / 100 t / 150 t / 200 t. OEM is welcomed, if you have any interest, pls feel free to contact us. electrical and other parts packaged by high quality plywood crates,beams packaged by plastic woven cloth.
