Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :93% PH value :8.42 Chlorides Content :0. 39% Sodium Sulfate Content :16% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
The raw material naphthalene superplasticizer (SNF/FDN/PNS) has strong dispersion effect on cement particles and good use effect of preparing super flowing concrete as well as cast-in-situ concrete and precast members with early strength and high strength requirements, can comprehensively improve various properties of the concrete, and is widely applied to highways, bridges, dams, harbors, tunnels, electric power, water conservancy as well as industrial and civil architecture, steam-cured and naturally-cured precast members and so on. Specifications Model SNF-C appearance Light brown powder Solid content 93% PH value 7-9 Sodium sulfate 18% Chloride ion 0.5% Water reduction 18%-20% Cement paste fluidity 230mm Water Insolubles 2% Air content 2% Application 1. Construction: 1. Widely used in precast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc. 2. Suitable for preparation of early-strength, high-strength, high-anti-filtration and self sealing&pumpable concrete. 3. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed. 4. Compatible with Portland cement, normal Portland cement, Portland slag cement, flyash cement and Portland pozzolanic cement etc. Others: Because of the high dispersion force and low foaming characteristics, SNF has also been widely used in other industries as Anionic Dispersing Agent. Dispersing agent for disperse, vat, reactive and acid dyes, textile dying, wettable pesticide,paper,electroplating, rubber, water-soluble paint, pigments,oil drilling, water treatment,carbon black, etc. Sodium sulfate content: 1. If the content is large, it may crystallize at low temperature which blocks pipes and valves, and reduces the water reducing capacity and strength.Because the solubility is affected by temperature change.When the outdoor temperature is below 20, the solubility will drop suddenly. When the outdoor temperature is below 16, the crystal of sodium sulfate is obvious.During crystallization, some effective components of naphthalene series superplasticizer will be adsorbed, which will affect the water reducing ability and strength of concrete.
The raw material naphthalene superplasticizer (SNF/FDN/PNS) has strong dispersion effect on cement particles and good use effect of preparing super flowing concrete as well as cast-in-situ concrete and precast members with early strength and high strength requirements, can comprehensively improve various properties of the concrete, and is widely applied to highways, bridges, dams, harbors, tunnels, electric power, water conservancy as well as industrial and civil architecture, steam-cured and naturally-cured precast members and so on. Specifications Model SNF-A appearance Light brown powder Solid content â?¥93% PH value 7-9 Sodium sulfate ï¼?5% Chloride ion ï¼?0.3% Water reduction 22%-25% Cement paste fluidity â?¥250mm Water Insolubles â?¤2% Air content â?¤2% Application 1. Construction: 1. Widely used in precast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc. 2. Suitable for preparation of early-strength, high-strength, high-anti-filtration and self sealing&pumpable concrete. 3. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed. 4. Compatible with Portland cement, normal Portland cement, Portland slag cement, flyash cement and Portland pozzolanic cement etc. Others: Because of the high dispersion force and low foaming characteristics, SNF has also been widely used in other industries as Anionic Dispersing Agent. Dispersing agent for disperse, vat, reactive and acid dyes, textile dying, wettable pesticide,paper,electroplating, rubber, water-soluble paint, pigments,oil drilling, water treatment,carbon black, etc.
Sodium Naphthalene Sulphonate BASIC INFORMATION: [Chemical name] sodium naphthalene sulphonate [Cas No.] 9084-06-4 [Molecular formula] SNF [Molecular weight] --- [standard] GB/T8077-2012 [Packing] 25kgs,1000kg,1200kg,1250kg PP bags with PE liner Naphthalene formaldehyde sulphonate water reducing agent is a synthetic powder based onbeta-sulphonate formaldehyde ondensate and reactive polymer. It has the properties of high range water reduction, set retarding and excellent strengthening. Elt-nsf sodium sulfate is less than 10% , suitable to middle strength or high strength concrete where high range water reduction is desired. Application: A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed. B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete. C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc. D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
Sodium naphthalene sulphonate fdn- 1 used for and widely for self-cured, vaporcured concrete and its formulations. At the early stage of Application, extremely prominent effects are shown. As the result, the modulus and siteutilization Can be drastically, the procedure of vapor cureis omitted in peak-heat summer days. Statistically 40-60 metric tons of coal willbe preserved when a metric ton of the material is consumed. 2 suitable for preparation of early-strength, high-strength, high-anti-filtration and selfsealing& pumpable concrete.
It is the condensation compound of formaldehyde and naphthalene sulfonic acid; is a good non-air bleed high efficiency water reducing agent. It can be used in the prestressed unit and concrete engineering of highway, port and high-rise. We also could supply the other type water reducer such as poly-carboxylate superplasticizer, sulfonated melamine-formaldehyde resin superplasticizer. 25kg bag
Description Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting. 2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively. 3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose. 4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour. 5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions. 6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode. 7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization. 8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers. Uses and Dosages 1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing. 2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%. 3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely. Package, Storage & Handling 1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months. 4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 16 tons loaded in a 20ft.
300g Naphthalene Ball 1. 80% and 99%Purity 2. Safe and nontaxic to the environment. Ball size: 19x16mm, 120 g/bag; 48 bags/ctn; 2200 ctns/20'ft container.
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4%. For powder: woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Product Description: High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses: Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates: Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling. For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Sodium naphthalene formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate. Technical spefication: Solid content 92% min Moisture 8.0 % max Fineness 5.0% max Ph value 7 - 9 Chlorides content 2.0% max Surface tension 68-72 mn/m Cement flowing rate 230mm min Concrete reducing water rate 18% min Sodium sulfate content 18% max (5%max is also available) Sodium naphthalene formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Sodium naphthalene formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Addition ratessodium naphthalene formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Sodium naphthalene formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
Poly naphthalene sulfonate formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate. Technical spefication: Solid content 92% min Moisture 8.0 % max Fineness 5.0% max Ph value 7 - 9 Chlorides content 2.0% max Surface tension 68-72 mn/m Cement flowing rate 230mm min Concrete reducing water rate 18% min Sodium sulfate content 18% max (5%max is also available) Poly naphthalene sulfonate formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Poly naphthalene sulfonate formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Addition ratespoly naphthalene sulfonate formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Poly naphthalene sulfonate formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
NSF full name is Naphthalene Sulfonate formaldehyde condensate. Its high purity makes cement paticles with high dispersancy, low foaming, high range water reducing and obvious strengthening so that we can get advantages of accelerating project mould turnover and construction speed, and also saving cement, improving cement mobility and workability. NSF is a high range concrete admixture of concrete cast-in-place, prefabricating, pump and curing. NSF has a good adaptability to various cements and NSF is no erodent to reinforcing bar and nonpoisonous and pollution-free. NSF has been applied to the highway, bridge, tunnel, water conservancy hydroelectric project, port, quay, skyscraper, power engineering, industrial civil building, prestressing force component and high range concrete etc. 25kg/bag.
Appaearance: White powder. 20KG,500KG.
We are importers of Refined Naphthalene powder.
BASIC INFORMATION: [Chemical name] Sodium Naphthalene Sulphonate [Cas No.] 1321-69-3 [Molecular formula] C10H8O3SNa APPLICATION: A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed. B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete. C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc. D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
Sanitary Naphthalene Cubes Comes in the Pack of 16 Comes in Multicolour
Description YL-NNO is light brown yellow powder, an anion surface active agent. Easily soluble in water, acid, alkali and hard water. It has good dispersing property and affinity with protein and polyamide. Usage Mainly used for vat dye dyeing, reactive dye dyeing and acid dye dyeing. It can work as dispersant for acid staining pad and pigment pad dyeing; auxiliary for reducing dye powder and slurry. It can also be used in leveling agent in dyeing industry Advantages 1). As dispersant NNO;in disperse dye, vat dye, reactive dye, acid dye and leather dye. It has good grinding effect, hydrotropy and dispersibility. 2). As dispersant in textile printing and dyeing industry: pigment pad dyeing of disperse dye;vat acid dyeing of disperse dye; dye for silk and feather mixture; soluble vat dye dyeing; Etc. also can be used as dispersant for disperse dye and lake making; filler for commercial dye etc. 3). As dispersant in wettable pesticide and herbicide, the dispersibility and solubility of pesticide can be improved. 4). As dispersant in electroplating industry, so that the cladding film can be equal and have a better brightness. 5). As auxiliary tanning agent in leather industry, used together with tanning agent (ratio 1:10) to avoid tanning agent stickwith leather. Can also help to disperse dye to get a better appearance in color. 6). As dispersant for paper industry. After adding NNO into wood pulp to avoid the stain from the condensation ofasphaltum, resin and other material 0.2%-0.5% of the wood pulp weight as dosage is preferable. Can work as precipitator for animal size, 20%-30% of the size weight as dosage is preferable. 7). As dispersant in rubber industry. Can disperse sulfur, accelerant, anti-aging agent and some filler(like zinc oxide, barium sulphate, calcium carbonate etc). 2%-4% of the dry powdeweight as dosage is preferable. Can make NNO into 10% solution, then grind with others in ball grinder. 8). Also can be used in coating, painting, pigment, carbon black etc. 9). Can be used in color lake industry. Specification Item Specification Dispersing rate % 95%min Sodium sulfate content % 5 max pH value 7-9 Insolubles % 0.05% max Content of calcium and magnesium ion, ppm 2000 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg
The raw material naphthalene superplasticizer (snf/fdn/pns) has strong dispersion effect on cement particles and good use effect of preparing super flowing concrete as well as cast-in-situ concrete and precast members with early strength and high strength requirements, can comprehensively improve various properties of the concrete, and is widely applied to highways, bridges, dams, harbors, tunnels, electric power, water conservancy as well as industrial and civil architecture, steam-cured and naturally-cured precast members and so on.
