Contactless card is also called rf(radio-wave frequency) card. Our contactless card has adopted the most advanced american ait process. The core of ait technology is inlay embedding and module welding. The inlay is embedded into the pvc sheet accurately by ultrasonic measurement and then the module and the inlay are welded within nitrogen gas surrounding. Signature applications of thermal rewrite card:
The logical encryption cards are widely used in medical insurance, data storage, net bar toll, door-control and so on. The chips we adopt include Sidemen's series and ATMEL series, the capacity range between 2k bit and 16k bit.
Introduction: The rewrite card is a card with thermo rewrite film covered over the pvc or pet card in accordance with ISO7816. The consumption record and promotion information can be typed on the thermo rewrite film when the custom consumed with card. Next time the information can be erased and rewrite. It is convenient, not only for the custom to look over the consume record, but also for business to renew the promotion information. The rewrite card has been widely used in the lines of entertainment, retail sail, oil system, hotel, aviation and so on. Key features: Consume record can be typed directly on the card and convenient for the custom to look over. The card information can be erased and retype over and over, remaining for a long time. Different colors of materials are for choice, the typing range can be set differently, too. The visual information is personalized, tasteful and fashionable. Guarantee the consumers benefit effectively. Improve the effect of advertisements; increase the customs interest to consume with card. Application: Prepaid card, bonus point card, appointment/ booking card, security access control card, loyalty/ vie card, parking card, student id card, visitor& employee id card, lucky draw/ game card, gift card, ski pass card, and so on.
The capacity of the chips ranges between 1kbit and 64kbit. Operating frequency: 1mhz(5v) 1zhz(2.7v) 400khz(1.8v) Operating voltage: 5v, min 1.8v if require Write\erase: 1, 000, 000 times Data retention: 100yares Application area: data storage, phone card, campus card and so on The logical encryption cards are widely used in medical insurance, data storage, net bar toll, door-control and so on. The chips we adopt include siemens series and atmel series, the capacity range between 2k bit and 16k bit. Signature applications of contact ic card:
Typical applications: Transportation Government Home -banking Health care 180; medical identification. Signature applications of IC card:
Auto repair scanner, auto repair tools, auto diagnotic, car repair, car diagnostic, code reader.
Description: SUZCRP585 is to protect and encrypted pass code using DES/3DES/RSAí¡ technology. It meets the most demanding requirements of payment transactions (PCI-PED). It has a 32-bit processor to support powerful encryption (RSA, DES, 3DES...), ensuring confidential data is secure. Encrypted 1). Anti Trojan of keyboard record, screen etc. 2). Low cost security on online change. 3). Internal standard: DES/3DES to ensure the safe of customer. SUZCRP585 is a mini hand held device. It is designed for the remote access application, such as stock exchange, instant message, home banking, e-Commerce. SUZCRP585 is an online plug-in, plug-play device. It connects PC through USB cable. It is specifically designed to protect your PIN code from theft or unauthorized sources while connected to the network. Customers input pass code, it can encrypt the pass code and transfer the cipher to PC. It encrypts customer's pass code and cipher is never repeatable. It is more safety than static pass code. Specification: --Function: PIN Input DES/3DES/RSAí¡. Device status display. --Keyboard:Silicon keyboard, í¦0" to í¦9" key + 7 function keys. --Screen: Graphical LCD Resolution: 128*64. --Physical Feature:Dimensions: 100mm x 60mm x 10mm; weight: 65 g. --Power:USB cable power supply. --Temperature:Operation temperature: +5ípC to +40 ípC Storage temperature: -10 ípC to +60 ípC. --EMC, security Tamper evident casing CE:89/336/CEE. CC Part 15 Class B. --Optional: Smart card reader: Support ISO 7816 smart card(T=0 and T=1 protocols). Contactless reader: ISO14443 A & B, NFC, Optional Mifare, Felica, Calypso support. Magnetic card reader: ISO 1/2/3 . Neutral Packing.
Card reader Features: Usb2.0 all in 1 card reader More features: Four flash memory slots offering simultaneous read and write capabilities, bootable Feature, and hot-swapping (inserts or removes flash memory card without turning off the system) One front panel 2.0 ports for easy front panel access. Offering high-speed data transfer rate of up to 480mbps Backward compatible with usb 1.1 specification Two (2) front panel diagnostic led lights Designed for standard 5.25 drive bay Driver required for win95/98/2000/nt Cards type supported by 9 in 1 card reader: cf i/ii, sm, sd, mc, ms, msp, md, mini sd card Cards type supported by 12 in 1 card reader:cf i/ii , sm, sd, mc, ms, msp, md, mini sd, memory stick, memory stick pro, memory stick duo card Cards type supported by 18 in 1 card reader:cf i//i, ibm microdrive, sm, sd, msp, mini sd, t-flash, mmc-ii, rs-mmc, memory stick, memory stick pro, memory stick duo, memory stick magic gate pro, memory stick mag General specification Compatible with windows xp, 2000, me, 98, 98se Compliant with usb2.0 specification Compliant with usb1.1 specification Supports pci-bus power management interface 1.1 specification Supports 1.5/12/480 mbps data transfer rate Support Compact flash type i Compact flash type ii Ibm microdrive Sd Mini sd T-flash card Smart media Mmc Mmc-ii Rs-mmc Memory stick Memory stick pro Memory stick duo Memory stick pro duo Memory stick magicgate Memory stick magicgate puo Memory stick magicgate duo Xd Pvc packing
Material PC Chip Customer-specified Size 85.5*54mm(credit card size) or custom Data rewritable 100,000 times Read distance 0-10cm depends on the reader and environment Available Crafts -scratch-off panel -series number punch -pin number -4 color offset printing -magnetic stripe -bar code -hole punched etc. Optional Technique -Special function option Anti-metal layer -Custom logos/artworks printing/ Laser engrave -ID Number Printing Jet dot printing -URL, text, number,etc. - encoding/lock to read only
Card reader Four flash memory slots offering simultaneous read and write capabilities, bootable Feature, and hot-swapping (inserts or removes flash memory card without turning off the system) One front panel 2.0 ports for easy front panel access. Offering high-speed data transfer rate of up to 480mbps Backward compatible with usb 1.1 specification Two (2) front panel diagnostic led lights Designed for standard 5.25 drive bay Driver required for win95/98/2000/nt Cards type supported by 9 in 1 card reader: cf i/ii, sm, sd, mc, ms, msp, md, mini sd card Cards type supported by 12 in 1 card reader:cf i/ii , sm, sd, mc, ms, msp, md, mini sd, memory stick, memory stick pro, memory stick duo card Cards type supported by 18 in 1 card reader:cf i//i, ibm microdrive, sm, sd, msp, mini sd, t-flash, mmc-ii, rs-mmc, memory stick, memory stick pro, memory stick duo, memory stick magic gate pro, memory stick mag General specification Compatible with windows xp, 2000, me, 98, 98se Compliant with usb2.0 specification Compliant with usb1.1 specification Supports pci-bus power management interface 1.1 specification Supports 1.5/12/480 mbps data transfer rate Support Compact flash type i Compact flash type ii Ibm microdrive Sd Mini sd T-flash card Smart media Mmc Mmc-ii Rs-mmc Memory stick Memory stick pro Memory stick duo Memory stick pro duo Memory stick magicgate Memory stick magicgate puo Memory stick magicgate duo Xd Packing list (lxwxl) 55cm*40cm*30cm G.Wú¿kgú¬ 12kg N.Wú¿kgú¬ 11kg Q'ty 100pcs Packing blister packing 1, usb cable*1
Specification Type: Contactless R/O or R/W Operating Frequency: LF(125KHz) or HF (13.56MHz) IC Available at 125KHz: EM4102, EM4100, EM4001, TK4100, GK4100 IC Available at 13.56MHz: I-CODE (ISO 15693-3), MF Ultralight (ISO 14443A), MF1K (ISO 14443A), MF4K (ISO 14443A), Tag-itâ?¢ HF-I (ISO 15693-3), others upon request Size: dia.65mm (chip:dia.25mm) / dia.74mm(chip:dia.30mm), thickness:7mm Reading Distance: 5~20cm (Depends on reader and IC type) Material: Silicone Operating Temperature: -40º C to +100º C Storage Temperature: -40º C to +120º C Competitive Advantage 1. Waterproof IP 68 2. Wristband Material: Silicone 3. Flexible & easy-to-wear 4. Read distance: Up to 20cm (Depends on reader and IC type) 5. 100, 000 times reading & writing 6. Storage temperature: -40 to 100 degrees C 7. Also Available: Custom colors, embossed logo
Description for debug card with 2 digits display A shortcut to all your hardware problems. Plug in to the pci or isa slot and it will conduct a complete hardware diagnostic test to detect the defective hardware. Features: A shortcut to all your hardware problems! just plug into the pci or isa slot and it will conduct a Complete hardware diagnostic test to detect the defective hardware in no time. The purpose of the debug card is to make the difficult troubleshooting procedure easier and quicker. This debugging card will assist any technicians (from novice to advance users) in accurately and Conveniently locating their hardware problems faster, cutting down the troubleshooting time Drastically simply by displaying an easy to follow post (power on self test) code on its display. Installation guide: Quick and easy to install into an open pci or isa slot of your pc motherboard. Easy to read led display on the display. Will assist in revealing where problem is while troubleshooting. Can be used to identify whether cpu or motherboard is defective. Will help to determine if the memory is faulty. Able to pinpoint whether the video card is problematic. 6 leds that can hint whether power supply is failing. Simple to follow post code table for problem description. Drastically reduce troubleshooting time. Helpful to both novices and experienced users alike. Support: All types of motherboards with pci and isa interface of pc. In anti-static polybag.
Automotive code reader, car code reader, code scanner, obd2 code reader, EOBD code scanner.
Wholesale Porray my tag laundry tracking management system laundry tags u code 7 laundry tag uhf Apparel RFID Industry With an RFID laundry tracking system, RFID UHF Laundry Tags are attached to each piece of laundry, and when the RFID tags move through the assembly line, an RFID reader sends an interrogating signal and reads the tags. When each tag is read, the software determines what type of textile is being read, and directs it to the proper area or machine. The softwareâ??s findings can be displayed on a screen so that a person can immediately direct the textile or linen to its next destination. Product Specification P/N: RI-X011 Dimension : 60*20mm Material: 50% cotton, 50% polyester Inner Chip: NXP U CODE 7 ( EPC Class 1 Gen 2 / ISO 18000-6C compliant ) Memory: 128 bits EPC, 32 bits user memory Working Frequency : 902~928 MHz Operating Temperature: -40~ 85â?? (-40~185â??) Storage Temperature: -40~120â?? (-40~248â??), 50% RH Tag lifetime: First of 200 wash cycles or 3 years from ship date. Key Feature Optional dimensions for different needs Surpassed reading performance Good chemical and corrosion resistance Outstanding mechanical resistance
Clamshell card Clamshell plastic card containing a rfid module and antenna Mechanical dimensions Dimension (lxw) 57409; 86 mm x 54 mm Thickness 57409; 1.85mm ¦ 0.1mm Chip type 57409; atmel series, em series, hitag series, i-code series, mifare series Electrical Lf operating frequency 57409; 125khz* ¦ 6khz Hf operating frequency 57409; 13.56mhz reader standard (iso/iec 15693, iso/iec 14443) Temperature Storage 57409; -25¦c to +75¦c Operating 57409; -25¦c to +75¦c Material 57409; copper wire antenna and module with abs housing Options 57409; code printing Packaging 57409; delivered in shrink wrapped foil and packed in a box Type number 57409; cs-xx (clamshell card, xx denotes ic) Mechanical dimensions Dimension (lxw) 57409; 86 mm x 54 mm Thickness 57409; 1.85mm ¦ 0.1mm
Contact IC card, contactless IC card, rewritable card, magnetic card, scritch card, bar code card, phone card, IC card reader & writer, rewritable card printer..
Optical mark reader(omr scanner) is a high-tech data input device . Nanhao omr can be widely used in education examinations, signing up, subject choice, data statistics and evaluation in fields such as vote, transportation, human resources, fiscal taxation and finance and so on. Main application fields: Standard examinations in colleges, high schools and elementary schools, educational evaluations, analysis of student achievement , students' status management and so on. Specifications: Model: Omr43fs Reading mode: Single-face and read one time Feeding mode: Automatic Speed: 8000pcs/hour (based on a4) Form size: 130mmíß50mm-300mmíß210mm Form weight: 70-150g/m2 Track spacing: 5.08mm Marking tools: No.2 or softer pencils, carbon pens Mark shapes: Rectangles, ovals and circles Error rate: ín1íß10-7 Mark choice: Single choice, multiple choice and bcd code Format: 26 kinds, each has 255 commands at most Interface: Rs232, usb Host: Pc, laptop Weight: 8kg Operating system: Win2000, win2003, win xp Power supply: Ac100-240v, 50-60hz Dimensions: 560mmíß170mmíß400mm Operating condition: Temperature 0-40ípc, humidityín90%, no erosive gas Carton boxes
Detailed Selling Lead Description DS original cartridge size, Slot1 interface. Plug 'n Play, easy to use, just Drag 'n Drop file from PC to flash memory card. No FlashMe, built-in NoPass, and the cards in slot2 can be started directly. Supports CleanROM, No covert. 100% SDHC TF and standard TF compatibility up to 4TB(4096GB) flash memory card. High speed SDHC. Supports any TF card speed with no lag in game, Save directly to TF card, not to onboard chip, Never lose your saves. Automatically detect and generate save type. Supports Moonshell and homebrew. DLDI auto-patching. Supports FAT/FAT32, works on any OS. Supports Action Replay cheat and edit the code base. Built-in energy-saving design. User friendly skinnable interface. Touchscreen or button operation. Supports Skin DIY. Supports the Hot-Key SOFT RESET. Supports the WiFi game, DS Rumble Pak, DS Browser. Supports Download play. Supports 4-scale-lightness adjustment ( DS Lite only ). Free SDHC high-speed reader, Ultimate copy documents. we also support PS2 MEMORY CARD,PSP MEMORY STICK....R4 CARD,DSFRIE CARD,F-CARD,G6 CARD,M3 CARD,..for NDS/NDSL ..
Rfid e-unit E-unit Rfid chip and coil antenna for embedding into your product Eu = bare module coil, eup = with paper backing on both sides, Sgsd = with spacer and paper backing on both sides Mechanical dimensions sgsd eu* Diameter 57409; 15 ~ 30mm ¦ 0.5 mm 57409; 10 ~ 30mm ¦ 0.5 mm Thickness 57409; 0.85 mm ¦ 0.05 mm (125 khz) 57409; 1.2 mm ~ 4mm ¦ 0.3mm (125 khz) 57409; 0.75 mm ¦ 0.05 mm (13.56khz) Chip type 57409; atmel series, em series, hitag series, i-code series, mifare series Electrical Lf operating frequency 57409; 125khz** ¦ 6khz Hf operating frequency 57409; 13.56mhz reader standard (iso/iec 15693, iso/iec 14443) Temperature sgsd eu* Storage 57409; -25¦c to +75¦c 57409; -25¦c to +75¦c Operating 57409; -25¦c to +65¦c 57409; -25¦c to +65¦c Material 57409; copper wire antenna and module Options 57409; code printing for sgsd products Packaging 57409; delivered in tray packing in carton Type number 57409; eu-xx (e-unit, xx denotes ic) 57409; eup-xx (e-unit with paper backing, xx denotes ic Mechanical dimensions sgsd eu* Diameter 57409; 15 ~ 30mm ¦ 0.5 mm 57409; 10 ~ 30mm ¦ 0.5 mm Thickness 57409; 0.85 mm ¦ 0.05 mm (125 khz) 57409; 1.2 mm ~ 4mm ¦ 0.3mm (125 khz) 57409; 0.75 mm ¦ 0.05 mm (13.56khz)
RFID Card, people also calls them MIFARE card, contactless card, proximity card, NFC PVC card, chip card, IC card, UHF card, etc. With the chip of low frequency 125KHz, high frequency 13.56MHz, or ultrahigh frequency 860~960MHz. Since 1980, RFID card was widely used in transportation system, security protection, mobile payment, access control, member managementm, Library card, ID card, UID card, �� Features 1. Material: PVC, PET, PET-G 2. Size: CR80 (85.5*54*0.84mm) or Customized 3. Printing: Full color CMYK Offset Printing, silk screen printing, Pantone color, etc 4. Frequency: LF 125 Khz, HF 13.56mhz, UHF 860~960Mhz 5. Operating Mode: Contactless 6. Reading distance: 1mm-1m, depend on the chip and reader 7. Data retention: 10 years 8. Operating life: Can be read and encode more than 100,000 times 9. Crafts Card surface: Glossy/Matted/Frosted Magnetic stripe: Loco (300 OE), Hico (2750 OE, 4000 OE) Serial Number, Laser number, Laser stamp, Embossing, Invisible UV, Barcode, QR codes, Signature panel, Scratch off panel, Silk full side of gold/silver, Chip Encoding, Mag stripe Encoding, Hot Stamping, Hole punching, translucent, Separate polybag packing, etc
