Standards ASTM / ASME B168 / SB168 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Specifications ASTM B366 / ASME SB366 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Standards ASTM / ASME B167, B517, B516 / SB167, SB517, SB516 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded
We offer various types of Inconel Flanges that are provided in ANSI, DIN, JIS, BS and ASME standards. These Inconel flanges are available in following sizes and specifications. â?¢ Production standard: ANSI/ASME B16.5, ANSI B16.47â?¦ API, DIN, JIS, BS â?¢ Production size: 1/2 inch â?? 48 inch (15mm â?? 1200mm) â?¢ Grades: o ASTM / ASME UNS 6600 Inconel 600 o ASTM / ASME UNS 6601 Inconel 601 o ASTM / ASME UNS 6625 Inconel 625 o ASTM / ASME UNS 7718 Inconel 718 o ASTM / ASME UNS 7751 Inconel X-750 o ASTM / ASME UNS 8800 Inconel 800 o ASTM / ASME UNS 8810/11 INCOLOY 800H o ASTM / ASME UNS 8825 INCOLOY 825 Range: Weld Neck, Slip On, Blind, Socket Weld, Lap Joint, Spectacles, Ring Joint, Orifice, Long Weld Neck, Deck Flange, etc Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500#
We offer a wide range of Inconel Tubes, which is impeccably designed to meet with various industrial functions. These inconel tubes are offered by us in a variety of sizes and are offered at industry-leading prices. We also meet customized requirement for our clients benefit. Specifications: Standards: ASTM / ASME SB 163 / 165 / 167 / 464/ 517 / 619 / 622 / 626 / 704 / 705. Grades: UNS 8825 (Inconel 825) UNS 6600 (Inconel 600) UNS 6601 (Inconel 601) UNS 6625 (Inconel 625) Range: 1 mm OD up to 254 mm OD in 0.2 TO 20 mm thickness Type: Seamless, ERW, Welded, CDW Form: Round, Square, Rectangular, Coil, U Shape Others: Hydraulic Tube, Horn Tube, Capillary Tube, Boiler Tube, Precision Tube, IBR Tube, Inconel square Tubes Length: Single Random, Double Random & Cut Length End: Plain End, Beveled End, Threaded Features: Value Added Services Epoxy & Fbe Coating Electro Polish Draw & Expansion Bending Buffing
Pipes, pipe fittings, flanges, fasteners, round bars, sheets, plates, wires, wire mesh, valves, buttweld fittings, socketweld fittings, etc all in the grades of stainless steel, carbon steel, alloy steel, titanium, monel, inconel, incoloy, nickel, hastelloy, zirconium, hastalloy, invar, duplex, super duplex, mild steel, etc.
Nickel alloy tubes, sheets, coils, bars, forgings, welding wires, UNS N 06600, incone l625, inconel 690, hastelloy C 276, monel 400, alloy 800, incoloy 800HT, incoloy 825.
Plate Thick:3-30mm thickness ¡ê¬width * length ¡¨¹1500mm*¡¨¹2500mm Woven bag
Duplex s32205, s31803 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 serious stainless steel. "duplex" describes a family of stainless steel that are neither fully austenitic, like 304 stainless, nor purely ferritic phase. In the annealing condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex stainless tube. As required
Size |¦ì3mm~|¦ì219mm According to astm, jis, gb standard Tolerance , surface, and other requirements will be according to requirements if have any, or it would be acc. To std Woven bag, wooden box, steel frame
We offer a wide range of Inconel Forged Fittings that are manufactured from quality tested components. Known for its high quality and durability, these inconel fittings are widely used in various industries across the globe. Standards: ASTM / ASME SB 564 Grades: â?¢ Inconel 800 (UNS No. N08800) â?¢ Inconel 825 (UNS No. N08825) Inconel 600 (UNS No. N06600) Inconel 625 (UNS No. N06625) Inconel 601 (UNS No. N06601) Types: Elbow 90 Deg. & 45 Deg Tee Equal & Reducing Union, Cross, Coupling Full & Half Socket Reducing- CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipole
Seamless Nickel Alloy Steel Tube&Pipe Description: Product Name ASTM B167 B829 Nickel Alloy 690 UNS N06690 Seamless Steel Pipe and Tube Manufacture Standards ASTM B163, B165, B167, B407, B423, B444, B622, B677, B729, B829, B983, etc. Material Hastelloy Series, Haynes Series, Inconel Series, Incoloy Series, Monel Series, Nickel Series, High Temperature Alloys Application Chemical process industry, heat treating fixtures, airframe components and nuclear reactors, power generation equipment, seawater application, etc. Hastelloy Series: Hastelloy B(UNS N10001), Hastelloy B-2(UNS N10665), Hastelloy B-3(UNS N10675), Hastelloy C-4(UNS N06455), Hastelloy C-22(UNS N06022), Hastelloy C-276(UNS N10276), Hastelloy C-2000(UNS N06200), Hastelloy G-30(UNS N06030), Hastelloy G-35(UNS N06035). Haynes Series: Haynes 230(UNS N06230), Haynes 556(UNS R30556). Inconel Series: Inconel 600(UNS N06600), Inconel 601(UNS N06601), Inconel 617(UNS N06617), Inconel 625(UNS N06625), Inconel 690(UNS N06690), Inconel 718(UNS N07718). Incoloy Series: Incoloy 020(UNS N08020), Incoloy 800(UNS N08800), Incoloy 800H(UNS N08810), Incoloy 800HT(UNS N08811), Incoloy 825(UNS N08825), Incoloy 925(UNS N09925). Monel Series: Monel 400(UNS N04400). Nickel Series: Nickel 200(UNS N02200), Nickel 201(UNS N02201). High Temperature Alloys: GH2132,GH3030,GH3039,GH3128,GH3044,GH4080A Our product enjoys a good reputation in the market of the USA, Canada, Brazil, Mexico, Germany, Italy, Netherland, Britain, Australia, Russia, South Korea, Thailand, Philippines, Malaysia, Iran, South Africa, Ghana and etc. If you have any demands or inquiries, please feel free to send it to us.
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
PVC Regrind Post Production From Pipe MATERIAL: PVC Regrind Post Production From Pipe CATEGORY: PVC TYPE: REGRIND GRADE: Regrind post production from pipe SPECIFICATION: Color â?? mix. Quantity per container â?? 25 ton. see TDS for further details Origin: Israel - Haifa LOADING WEIGHT: 25 Ton FAS (USD/Ton): 690$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days