1. GVBL-T12GD UV / Visible Sensor Features TO-46 with quartz glass Indium Gallium Nitride Based Material PN-type Photodiode Photovoltaic Mode Operation High Responsivity & Low Dark Current 2. GVBL-T12GD UV / Visible Sensor Applications UV LED Monitoring (365, 385nm, etc.) Blue LED Monitoring UVA Lamp Monitoring UV Curing 3. GVBL-T12GD UV / Visible Sensor Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 5V Forward Current: 1mA Soldering Temperature: 260'C 4. GVBL-T12GD UV / Visible Sensor Characteristics (at 25'C) Dark Current(Max.): 1nA Photo Current(Typ.): 550nA (385nm LED, 1mW/cm2) Responsivity: 0.13A/W Spectral Detection Range: 330~445nm
Parameters: 1)storage temperature: -40 to 125ºc 2)supply voltage: 3.8v 3)humidity operating range: 1-100%rh 4)temperature operating range: -40 to 125ºc 5)vdd to gnd:-0.3 to 3.6v 6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v 7)-10 to +10 ma Features: (1)dfn type package (2)relative humidity and temperature digital output, i2c interface (3)fully calibrated (4)lead free sensor, reflow solderable (5)low power consumption (6)fast response time and very low temperature coefficient Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors More details welcome to inquiry: skype:isweek_laura
1. Ftatures - Chip size: 0.4mm, SMD 3528 PKG - Aluminium Gallium Nitride Based Material - Schottky-type Photodiode - Photovoltaic Mode Operation - Good Visible Blindness - High Responsivity and Low Dark Current 2. Application UV Index Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 3V Forward Current: 1mA Optical Source Power Range: 0.1u~100m W/cm2 Soldering Temperature: 260'C 5. Characteristics (at 25'C) Dark Current: 1nA Temperature Coefficient: 0.1%/'C Responsivity: 0.11A/W Spectral Detection Range: 240~320nm Active area: 0.076mm2 -
1. Features Aluminium Gallium Nitride Based Material Schottky-type Photodiode Photovoltaic Mode Operation Good Visible Blindness High Responsivity & Low Dark Current 2. Applications UV Index Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 3V Forward Current: 1mA Optical Source Power Range: 0.1µ~100m W/cm2 Soldering Temperature: 260'C 4. Characteristics (at 25'C) Dark Current: 1nA Temperature Coefficient: 0.1%/'C Responsivity: 0.11A/W Spectral Detection Range: 240~320nm Active area: 0.076mm2
UV sensor 120-277V AC/ 220-240V AC input, remote control setting, off/on and sterilization timer function 5.8GHz C-band microwave motion sensor, off/on control. Operating voltage: 220-240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version). Rated load: 200W @ 120V AC, (capacitive) 400W @ 200-277V AC, (capacitive). Stand-by power:
1. Uv sensor guvb-t11gd-l features Aluminium gallium nitride based material Schottky-type photodiode Photovoltaic mode operation Good visible blindness High responsivity & low dark current 2. Uv sensor guvb-t11gd-l applications Uv-b lamp monitoring Uv-b led monitoring 3. Uv sensor guvb-t11gd-l absolute maximum ratings Storage temperature: -40~90'c Operating temperature: -30~85'c Reverse voltage: 3v Forward current: 1ma Optical source power range: 0.01âµ~100m w/cm2 Soldering temperature: 260'c 4. Uv sensor guvb-t11gd-l characteristics (at 25'c) Dark current(max.): 20na Photo current(typ.): 1.5 Temperature coefficient: 0.1%/'c Responsivity: 0.13a/w Spectral detection range: 220~320nm Active area: 1.536mm2
Concentrator lens sic based uv photodiode sensor sg01d-5lens Avirtual = 11, 0 mm2 Properties of the sg01d–5lens uv photodiode • broadband uva+uvb+uvc, ptb reported high chip stability, for flame detection • radiation sensitive area a = 11, 0 mm2 • to5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin • 10µw/cm2 peak radiation results a current of approx. 350 na About the material silicon carbide (sic) Sic provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise. These features make sic the best available material for visible blind semiconductor uv detectors. The sic detectors can be permanently operated at up to 170°c (338°f). The temperature coefficient of signal responsivity) is also low, < 0, 1%/k. Because of the low noise (dark current in the fa range), very low uv radiation intensities can be measured reliably. Please note that this device needs an appropriate amplifier (see typical circuit on page 3). Options Sic photodiodes are available with seven different active chip areas from 0, 06 mm2 up to 36 mm2. Standard versionis broadband uva-uvb-uvc. Four filtered versions lead to a tighter sensitivity range. All photodiodes have a hermetically sealed metal housing (to type), either a 5, 5 mm diameter to18 housing or a 9, 2 mm to5 housing. Further option is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly. Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 , C to 120 , C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure. Weichai water temperature sensor 612600090673/612600090673 Dongfeng Tianlong, day Kam water temperature sensor water temperature plug / 0281002209 / D5010412450 Weichai Europe three cooling water temperature sensor 612600090919/612600090919 Nanchong natural gas engine 36.2D-02012 water temperature sensor assembly (ECU) / 36.2D-02012 FAW Xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010 Dongfeng warrior accessories EQ2050 - water temperature is too low / too high sensor / 3839C21-010 Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627 Natural gas engine water temperature sensor 3602160-55D Heavy Duty Hau Wo LNG Natural Gas Engine Cooling Water Temperature Sensor / R61540090004 Weichai WP10 water temperature sensor 612600090358 Nanchong natural gas engine water temperature sensor 36.2D-02012 / 36.2D-02012 Weichai engine country 3 EFI cooling water temperature sensor 612630060035 Chongqing Cummins engine M11 water temperature sensor 4921477 Shiyan Auto Parts City / 4921477
Digital Temperature Humidity Sensor HTU21D In Stock 1. digital temperature and humidity sensor 2. range:1-100%RH 3. original, high quality, competitive price DESCRIPTION HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
Waterproof Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor Probe 15m Description Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor Ampfort DS18b20 temperature detector probe adopts the brand-new and original DS18B20 temperature sensor chip, chinese brand chip , GX18B20 produced by Beijing Zhongke Galaxy Core Technology Co., Ltd. belong to scientific research technology resources of the Institute of microelectronics, Chinese Academy of Sciences if you have cost pressure. Each pin of chip is separated by heat shrinking tube to prevent the short circuit, and sealed inside for waterproof and damp-proof. Its direct "One line Bus" digital transmission greatly improves the anti-jamming capability of system, suitable for field temperature measurement in harsh environments. At the same time, it is sealed with a high thermal conductivity of sealing rubber strip, to ensure the temperature sensorâ??s high sensitivity, with a very tiny temperature delay. Its measured temperature range is from -55 to +125, in the range of -10~ +85, its accuracy is ±0.5. When testing it, need to connect the signal end (yellow line) of sensor to the Digital port of microcontroller, meanwhile, need to add a pull-up resistor on the Signal end, or else the test will fail. Features Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor * 3.0V ~ 5.5V power supply * 9 to 12 adjustable resolution * Wide temperature range of -55 ~ +125 * No external components, a unique single-bus interface * Red (VCC), yellow (DATA), green (GND) * Output leads: red (VCC), white (DATA), black (GND) * Every pin of the chip is sealed and separated by the heat shrink tube. Good for insulation and to prevent short circuit. 3 output lines, * * * * * * VCC/DATA/GND. The exterior is made of PVC plastic tube, which is safe, wear-resistant and waterproof. * The high quality 304 stainless steel probe, is resistant to high temperature, fast heat conduction and accurate reading. * The sensor has one unique number and the temperature acquisition device identifies the corresponding temperature sensor by number. * The field temperature is directly transmitted in the digital way of 1-Wire bus, no need the external components and greatly improves the system's anti-interference. Suitable for the harsh environments. Internal Wiring Diagram Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor DS18B20 26AWG Cable Power NTC Thermistor 15m Digital Temperature Sensor Probe 2 Pin 1 Soldering to black GND ; Pin 2 Soldering to white DQ ; Pin 3 Soldering to red VDD;
Sht20 digital temperature and humidity sensor product summary The sht20 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit - all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht20 digital temperature and humidity sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package reflow solderable Sht20 digital temperature and humidity sensor performance Size: 3 x 3 x 1.1 mm Output: i²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2µw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
Sht21 digital humidity and temperature sensor product summary The sht21 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip - which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht21 digital humidity and temperature sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package - reflow solderable Sht21 digital humidity and temperature sensor performance Size: 3 x 3 x 1.1 mm Output: iâ²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2âµw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
Digital relative humidity and temperature sensor htu20d description Htu20d(f), is a new digital humidity sensor with temperature output of meas. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable dual flat no leads (dfn) package with a small 3 x 3 x 0.9 mm foot print. This sensor provides calibrated, linearized signals in digital, i2c format. Htu20d(f) digital humidity sensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensor are designed for high volume and cost sensitive applications with tight space constraints. Digital relative humidity and temperature sensor htu20d features * full interchangeability with no calibration required in standard conditions * instantaneous desaturation after long periods in saturation phase * compatible with automatized assembly processes, including pb free and reflow processes * individual marking for compliance to stringent traceability requirements Digital relative humidity and temperature sensor htu20d applications * home appliance * medical * printers * humidifier * multimedia: smartphone, tablet,
Digital Humidity Sensor with the interface to MCU is I2C HTU21D Model Number: HTU21D 1.Features: · DFN type package · Relative Humidity and Temperature Digital Output, I²C interface · Fully calibrated · Lead free sensor, reflow solderable · Low power consumption · Fast response time and very low temperature coefficient 2.Description HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of HTU21D sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and a checksum improves communication reliability. With made improvements and the miniaturization of the sensor the performance-to-price ratio has been improved – and eventually, any device should benefit from the cutting edge energy saving operation mode. 3.Description .Full interchangeability with no calibration required in standard conditions · Instantaneous desaturation after long periods in saturation phase · Compatible with automatized assembly processes, including Pb free and reflow processes . Individual marking for compliance to stringent traceability requirements 4 APPLICATIONS · Printers · Humidifier · Automotive · Home Appliance · Medical
HPT604 is full sealed submersible level sensor /transmitter. It is made by building in high stable and reliable OEM piezo-resistive pressure sensor and high accurate circuit board into the stainless steel housing. Integrated construction and standard signal provide the user easy and convenient application in the local working place. The special cable connects with housing, can be immerged into the media for a long time. HPT604 level sensor /transmitter has compact size, light weight and good stability; it can be used for water or liquid measure and control of medicine, metallurgy, electricity, mine, city water supply and drainage and hydrology, etc.
UVA-only SiC based UV photodiode A = 0.06 mm Model Number: SG01SA18 1.Properties of the SG01SA18 UV photodiode * UVA-only sensitivity, PTB reported high chip stability * Active Area A = 0,06 mm2 * TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin * 10mW/cm2 peak radiation results a current of approx. 222 nA 2.About the material Silicon Carbide (SiC) SiC provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise. These features make SiC the best available material for visible blind semiconductor UV de-tectors. The SiC detectors can be permanently operated at up to 170'C (338'F). The temperature coefficient of signal (responsivity) is also low, < 0.1%/K. Because of the low noise (dark current in the fA range), very low UV radiation intensities can be measured reliably 3.Options SiC photodiodes are available with seven different active chip areas from 0.06 mm2 up to 36 mm2. Standard version is broadband UVA-UVB-UVC. Four filtered versions lead to a tighter sensitivity range. All photodiodes have a hermeti-cally sealed metal housing (TO type), either a 5.5 mm diameter TO18 housing or a 9.2 mm TO5 housing. Further op-tion is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).
We have available folowing ships spares for Sale Digital excitation control Proximity sensor autonics Model No-PSN40-20A0 Power-100-240VAC Country of origin-Korea If required then please contact on
AM2315 Digital Temperature and Humidity Sensor Product Overview AM2315 humidity capacitance is a digital temperature and humidity module contains a digital IIC output has been calibrated temperature and humidity combined sensor. It uses a dedicated digital module acquisition techniques and temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages. AM2315 Digital Temperature and Humidity Sensor Product Features â?¢ Fully calibrated â?¢ Digital signal output â?¢ Ultra-low power â?¢ Excellent long-term stability â?¢ Standard single-wire output AM2315 Digital Temperature and Humidity Sensor Applications HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, appliances, humidifiers, medical, weather, and other relevant humidity detection control. AM2315 Digital Temperature and Humidity Sensor Product Highlights Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high precision temperature measurement devices. AM2315 Digital Temperature and Humidity Sensor Sensor Performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80 deg C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3 deg C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2 deg C * Service voltage: 3.3V to 5.5V * Output signal: IIC
Mfm2040u digital gas flow sensor description Mfm2000 series is a gas flow sensor with low pressure drop capable of measuring medical gases up to 45 lpm. It is configured to be customizable with different flow inlet and outlet configurations. Mfm2040u digital gas flow sensor features * flow range: 0.04 to 40 slm * operating temperature range: -40 to 85'c * resolution: 15bit * sampling time: 7.5ms * low pressure drop flow sensor * high accuracy +/-2.5% reading * calibrated and temperature compensated for air * low power consumption * digital i2c * made for medical applications * calibrated for air, and o2
Supply range:3.0V to5.5V Temperature range:-55 to +110degree Celsius Wire length:1M/2M/5M...50M optional Material:stainless steel sheath Output:3-wire: Red:+ Black:_ Yellow:signal line Basic Info Model NO.: UN-CL37HP Teeth Whitening Method: Cold Light Whitening Certification: ISO, CE Material: PVC Medical Devices Reg./Record No.: Ehsyjxjyb20150324 Wave Length: 420-480nm MOQ: 5 Transport Package: Carton Origin: China Interface: 4 Holes Applicable Departments: Oral Department of Internal Medicine Type: Mechanic Equipment Medical Device Regulatory Type: Type 2 Working Voltage: AC100-240V, 50/60Hz Light Intensity: 800 MW/Cm²-1200 MW/Cm² Trademark: UN Specification: 800g HS Code: 9018499000 Product Description Dental LED curing light with 4 working modes Function and Features: * Double function : the Blue light for curing and the Purple light for Caries detector. * Press M button to change function, no need any other thing to help! * Use purple light to illuminate teeth, Caries will show Red color, Healthy teeth will show white color. It will help dentist to remove caries exactly. * 4 working model : Strong light, Gradually light, Pulse ,and Pre-heating .(The first 10s is with 50% power light, the rest time is full power light) * Germany material fiber optic light tip with high articulation. * LCD Sreem display the working situation clearly . * Constant light intensity output ,it will not be effected whatever the battery is lower or full power. * High efficiency for exchange rate from electricity to light. A full charge can be used for more than 200 times continously . * Bionic sreamline design ,luxury and comfortable to operate. * Humanized design with battery easy to replace. * Automatically detection function of charging voltage * Double protection board for battery * Using USA imported circuit chips. * Using BYD battery * The standby time can be 1 year. Application Range: It can be used for any brand of resin material. Technical Data: Working voltage for adapter: AC100-240V, 50/60HZ Wave length: 420-480nm Light intensity: 800 mW/cm²-1200m mW/cm² Packing: Dimension: 22*16*15cm GW: 800g
