Gas analyser Analysers for stack and ambient air pollution monitoring Also used for petrol and diesel vehicles
Application: TKQC type SF6 gas recovery device is an integrated recovery device. The device is composed of a recovery system a vacuum pumping system a cleaning system a storage system and a condensing system. Features: Adopt advanced principles and technology advanced design complete function reasonable structure simple operation. Two-stage rotary vane vacuum pump the vacuum speed is fast and equiped with anti oil return device. Automatically confirm and adjust the three phase power supply for electrical system. Using the newest patented technology SF6 special instrument and valves more reliable than similar products. The device adopts air cooling movable type and can be used without external water source.
Welcome to Relon. Rakshak Gas Guard Mini is a small device that can be installed easily by the customers themselves.
Portable Combustible Gas Detector TC-BO3-3 Combustible Gas Detector Detection of gas: Combustible gases, organic solvents, etc. TC-BO3-3 Combustible Gas Detector Technical Parameters * Detection of gas: Combustible gases, organic solvents, etc. * Detection Mode: Diffused * Detection principle: Semiconductor type * Measuring range: 0-20% LEL (combustible gases) * Accuracy: full scale ± 5% LEL * Response time: T90
Stand-combustible Gas Detector BJ-92-1A-11 Combustible Gas Detector Detection of gas: 1A: natural gas BJ-92-1A-11 Combustible Gas Detector Output: * DC12V pulse output * AC220V contact output * AC220V pulse output * AC220V Output * Relay contact (normally open output), with the controller BJ-92-1A-11 Combustible Gas Detector Technical Parameters * Detection of gas: natural gas * Detection method: FIGARO semiconductor gas sensor * Alarm concentration: Gas explosion limit below 25% * Power supply: AC220V 15% * Power consumption: 3W or less * Temperature: -10 ~ 55'C
Point Combustible Gas Detector BJ-86-3A Combustible Gas Detector Detection of gas: Liquefied natural gas Other BJ-86-3A Combustible Gas Detector Technical Parameters * Detection of gas: Liquefied natural gas * Detection method: FIGARO semiconductor gas sensor * Power sourceâ??: DC24V ± 15%â?? * Power consumption: 2.5W or less * Alarm: red light, the alarm sound over 70dB * Temperature: -10 ~ 55'C
MF5600 Series Detachable Display Gas Flow Meters General description MF5600 series mass flow meters are specially designed for applications where the display isoften required to be placed separated away from the flow channel or meter body, such as theoxygen metering system in a hospital. These meters are opted with the standard industrialuser interfaces (RS485 and 4 ~ 20mA), and user defined alarm functions for better monitoringor control over the network. The off-the-shelf products (MF5612 and MF5619) are for gasflow measurement of 0 ~ 300 SLPM and 0 ~ 800 SLPM, respectively. MF5600 Series Detachable Display Gas Flow Meters Features and Applications - Detachable display that can be placed away from the flow channel via a specially designed cable - Standard 4 ~ 20 mA or RS485 for remote data communication - Hygienic stainless steel body ready for oxygen metering - Extended rangeability for accurate flow monitoring and control - Intrinsic safe enclosure MF5600 Series Detachable Display Gas Flow Meters Specifications * Flow Range: - MF5612: 0.3 ~ 200, 300 SLPM - MF5619: 0.8 ~ 600, 800 SLPM * Turn-down Ratio: 30:1 * Accuracy: ±(1.5+0.5 FS)% * Repeatability: ±0.5% * Max. Pressure: 1.0 MPa * Operating Tenperature: -10 ~ +55'C * Output: 4~20 mA; RS485; Pules
Stand-combustible Gas Detector BJ-62-1A Combustible Gas Detector Detection of gas: liquefied natural gas BJ-62-1A Combustible Gas Detector Output: * DC12V pulse output can be driven shut-off valve * No output BJ-62-1A Combustible Gas Detector Technical Parameters * Detection of gas: liquefied natural gas * Detection methodâ??: FIGARO semiconductor gas sensorâ?? * Alarm concentrationâ??: 25% of the lower flammable limit or lessâ?? * Power supply: AC220V ± 15% * Power consumption: 3W or less * Temperature: -10 ~ 55'C
Point Combustible Gas Detector BJ-86-3A Combustible Gas Detector Detection of gas: Liquefied natural gas Other BJ-86-3A Combustible Gas Detector Technical Parameters * Detection of gas: Liquefied natural gas * Detection method: FIGARO semiconductor gas sensor * Power sourceâ??: DC24V 15% * Power consumption: 2.5W or less * Alarm: red light, the alarm sound over 70dB * Temperature: -10 ~ 55'C
TSP-16 Series Indoor Air Quality Monitor --- Designed for hotels, houses and other public places to detect the indoor air quality * Experienced in designing IAQ product for 12 years, long term exportation to Europe and America, powerful performance guaranteed * Real-time detecting indoor PM2.5/PM10, CO2, TVOC, Temperature and relative humidity * Built-in self-owned patent measurements of temperature and humidity compensation technology * Suitable for hotels, residential projectsto analyze indoor air quality, and to control ventilation systems, etc. * Wall mounting, provide Modbus RS485 and WIFI optional * Basic function of indoor air detector TSP-16 Series IAQ Monitor Features * IAQ detector designed for civilian use with affordable price * 24 hours online real-time IAQ detector * Real-time output PM2.5/PM10, CO2, TVOC and humidity data * Using special pattern to ensure the measurement value does not effected by the surrounding * Modbus RS485 interface and WIFI available,suitable for networks in existing and modern buildings * OLED displays real-time data (optional) * Indicators with three different colors to show range of IAQ density * Wall mounting, 24VAC/VDC power supply * With over 12 years' experience in designing IAQ products and long-term exportation to Europe and America, we provide a dozen of different types of IAQ * Products for different applications * RJ45 Ethernet interface product customizable TSP-16 Series Indoor Air Quality Monitor Main Application * Smart Home Systems *Residential projects * Hotels, class rooms, offices and other public places where need IAQ monitoring with civil level *Air quality monitoring in other public places TSP-16 Series Indoor Air Quality Monitor Specifications * Detection Parameters: PM2.5/PM10, CO2, TVOC, temperature & humidity * PM2.5 Measuring Range: 0~1000μg/m3 * PM10 Measuring Range: 0~1000μg/m3 * Temperature Measuring Range: 0'C ~ 50'C * Humidity Measuring Range: 0~99%RH * CO2 Measuring Range: 400~2,000ppm * Measuring Range: 0~ 4.0mgâ??m3 * Operating Temperature: 0~50'C * Operating Humidity: 0~99%RH * Power supply: 24VAC±10%, or 12~36VDC
M4000 Spark OES Spectrometers for Alloy Analysis M4000 Spark OES Spectrometers creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials.High quality OES is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenanceExcitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A Spark ignition pulseï¼?1-14kV Spark excitation pulseï¼?20-230V Arc excitation pulseï¼?20-60V Excitation Hole:13mm high quality OES, Spark OES Spectrometers, spark oes for sale Argon Requirement Purity requirementï¼?99.999% Input pressureï¼?0.5MPa Max 3.5L/min in sparking Average standby flow: 1L/min
M4000 Spark Oes Optical Emission Spectroscopy M4000 Spark Oes Optical Emission Spectroscopy creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials. Spark Oes Spectrometer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenanceExcitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A Spark ignition pulseï1-14kV Spark excitation pulseï20-230V Arc excitation pulseï20-60V Excitation Hole:13mm Argon Requirement Purity requirementï99.999% Input pressureï0.5MPa Max 3.5L/min in sparking Average standby flow: 1L/min Spark Oes Optical Emission SpectroscopyïSpark Oes Spectrometer, high quality oes spectroscopy low price Electrical and Environmental Requirement AC220V±20V,50Hz
M4000 Spark Oes For Material Testing M4000 Spark Oes For Material Testingcreatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials. Spark oes( oes testing) is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research, oes material testing. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenanceExcitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A
M5000 Spectrometer for Metal Trace Analysis Introduction M5000 spectrometer for metal trace analysis is a compact desktop spectrometer for metal analysis based on CCD technology. spectrometer for metal analysis design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 has established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the metal analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001.
M5000 Stationary Metal Material Testing Analyzers Introduction M5000 stationary metal material testing analyzersis a compact desktop spectrometer for metal analysis based on CCD technology. Metal material analyzer design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 metal testing analyzershas established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001. Metal analyser,metal material analyzer,metal testing analyzershot sale - M5000 Metal Analyzer M5000 Metal AnalyserModel
M5000 Metal Alloy Analyzer Spectrometer Introduction M5000 metal alloy analyzer is a compact desktop spectrometer for metal analysis based on CCD technology. metal analyzers design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 spectrometer metal analyzer has established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001.
FPI MiX5 Portable XRF spectrometer 1.Overview FPI MiX5 handheld X-ray fluorescence (XRF) analyzers( FPI MiX5 Portable XRF spectrometer ) enables fast, accurate and non-destructive analysis of a variety of materials with the world's leading X-ray fluorescence analysis techniques. It can determine the metal grades in seconds, with excellent metal analytical ability. Analysis results of laboratory level can be achieved with extra testing time. MiX5 series can analyze element composition of ferrous, nonferrous metals and alloy Enable customers to get accurate analysis results in quality control, material sorting, alloy identification, security, accident investigation etc. Manufacture FPI MiX5 Portable XRF spectrometer 2.Features (1). Optimised calibrations making reliable testing FPI MiX5 series combine a robust fundamental parameters (FP) method and empirical calibrations for superior precision and accuracy. Simply select the application that you need and analysis can be finished in seconds.
BR-V is a real-time air quality monitoring instrument used to detect air quality of indoor environment. It use high-precision sensor and translate the pollutant concentration in the air directly into intuitive data to provide air quality monitoring information and effective protection for your family health.
M4000 Optical Emission Analyzer for Alloy Analysis M4000 optical emission analyzer for alloy analysis creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials.Emission analyzer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenance Excitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A Spark ignition pulse1-14kV Spark excitation pulse20-230V Arc excitation pulse20-60V Excitation Hole:13mm Argon Requirement Purity requirement99.999% Input pressure0.5MPa Max 3.5L/min in sparking Average standby flow: 1L/min Electrical and Environmental Requirement AC220V±20V,50Hz Max 400VA in sparking Average standby power 50VA Room temperature: 1030 Storage temperature045 Relative humidity: 20%80% M4000 Alloy Analyzer Model ModelWavelengthDescription M4000 N175-520 nmAvailable for bases such as Fe, Al, Cu M4000 S200-520 nmAvailable for bases of Al, Cu Supply optical emission analyzer for alloy analysis, emission analyzer, optical analyzer, alloy analyzer in China. Alloy analyzer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research
Vasthi Instruments are global leaders in manufacturing of so2 analyzer,gas analyzers, gas detectors,Ozone Analyzers, online calibrator for calibration,dew point analyzer,particulate monitors,Continuous Ambient air quality monitoring system, stack gas analyzers and have been supplying instruments to customers worldwide,
