ACSR Core Wire 1) Profile: High Tensile Galvanized Steel Wire or ACSR Core Wire may be supplied as single wire or also in seven strands. Manufactured conforming to various international standards to specify requirement of customers. 2) Application: Used for mechanical re-inforcement in the manufacture of aluminum conductor steel reinforced (ACSR) Cable & Conductor ACSR Core wire is used in reinforcement of aluminium conductors used in distribution and transmission of electricity. 3) Material: high carbon steel 4) Diameter: 1.25-4.77mm 5) Technical Info: as below table 6) Packing: in coils, on spool 7) Standard: ASTM B498, IEC60888, IS 398 - Part II etc 8) All can be produced according to customers’ actual requirement.
This product twist system closely even, galvanized layer of bright and clean and firm, strong corrosion resistance, the hot dip galvanizing vertical process, to ensure that the zinc layer thickness. The product, as the core framework material of power cables and with its advantages of corrosion resistance, high strength, excellent property of expansion and high performance cost ratio and so on, directly serves the construction, transformation and updating of power supply and grid. Also, the product is widely used for fastening hanging bracket, bridge, suspension, communication wires, overhead power line, cable steel core and fixed object and so on. Galvanized steel wire: the product has excellent mechanical property, covered by deep zinc layer, with smooth, clean and firm surface and heavy coil weight, as well as it has accurate sizing. The product is used as the steel core wire in the cable of electric power circult.
Hot-dip galvaning is a process in which the wire is dipped in zinc to create a zinc coating. Hot-dip galvanized steel wire has the advantages of corrosion resistance, good weather-resistance and long life, so it is widely used in many fields. The requirements for hot-dip galvanized steel wire are as follows: 1. Uniform galvanized layer: The galvanized layer of hot-dip galvanized steel wire should be uniform and dense, without defects such as uneven galvanizing, wrinkling, and falling off. 2. The thickness of the zinc layer is appropriate: the thickness of the zinc layer of the hot-dip galvanized steel wire should meet the standard requirements to ensure its corrosion resistance. 3. Good surface: The surface of hot-dip galvanized steel wire should be smooth, without obvious burrs and oxides. 4. Strong adhesion of galvanized layer: The galvanized layer of hot-dip galvanized steel wire should have good adhesion and not easy to peel off. 5. The chemical composition of galvanized steel wire is stable: the chemical composition of hot-dip galvanized steel wire should meet the relevant standards to ensure its quality stability. 6. The size of the galvanized steel wire is accurate: the diameter, strength and other dimensional parameters of the hot-dip galvanized steel wire should meet the standard requirements to ensure its performance. In short, the requirement of hot-dip galvanized steel wire is to ensure that its galvanized layer has good quality and stable performance, so as to improve its corrosion resistance and life.
Material: 45#- 75#,77B,Q235 etc Dia: 1.0mm-6.0mm Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C�£?? Breaking strength:350mpa-2200mpa Steel wire (dia:1.0mm-7.0mm ) for ACSR,preformed line products and so on. Standard: ASTM B 498,ASTM A 411 AS 3863,BS 4565 ,JIS G 3548 ,EN 10264 we can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
4.77mm electrical cable steel wire Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above Item: 4.77mm electrical cable steel wire Material: high carbon steel Galvanized steel wire size: 1.44mm-4.770mm. Strand size:7(1.44-4.2);19Ã?(1.44-3.5); 37Ã?(1.44-3.5) Tensile strength: different Grade from min.1470 N/mm2 to min.1960N/mm2. Zinc coating: According to ASTM A475 Class A. Packing: larger coil,as per customer's requirement
Tianjin Zhongyou Metal Product Co.,Ltd is professional manufacturer with many years experience on metal wire.Founded in 1985, we have produced and exported galvanized
Material: Q195 Q235 45# 60# 65# 70# 80# 82B carbon steel Model Number: 0.3-13mm Standard: AISI,ASTM,BS,DIN,GB,JIS Steel Grade: Q195 Q235 45# 60# 65# 70# 80# 82B carbon steel Origin : India and China
Steel Strand Wire 12.7mm PC Strand Our company can produce various models according to different standards of products, specifications are as follows: (1) Steel Strand for PC Concrete GB/T5224: 17-9.5mm/11.1mm/12.7mm/15.2mm/15.7mm/17.8mm/21.6mm; ASTM416 17-7.9mm/9.53mm/11.11mm/12.7mm/13.2mm/14.29mm/15.24mm/17.8mm; BS 5896 17-8.0mm/9.3mm/9.6mm/11.0mm/12.5mm/12.9mm/15.2mm/15.7mm; JIS G3536 17-12.7mm/15.2mm; UNE 36094 17-9.3mm/13.0mm/15.2mm; KS D 17-9.5mm/11.1.0mm/12.7mm/15.2mm; AS/NZS4672 9.5mm(7 wire)/12.7nn/15.2mm; (2) Unbonded PC Strand 1x7-9.5mm/12.7mm/15.2mm/15.7mm. (3) Prestressed Steel Wire Plain steel wire for prestressed concrete/indented wire /spiral rib steel wire 3.0mm/4.0mm/4.8mm/5.0mm/6.0mm/6.25mm/7.0mm/8.0mm/9.0mm/10.0mm/12mm Good Performance Characteris (1)high tensile strength and elongation; (2)low relaxation value; (3)small stress losing; (4)excellent durable anti-fatigue performance INTRODUCTION A branch factory of HENGXING group (listed in 2007) Professional on PC Steel Strand manufacturing An annual output of 300,000 tons ISO management certificated China National construction steel quality supervision and test center certificated Cooperated with National railway for many years
High Tensile 12.7mm Steel PC Strand Wire Good Performance Characteris (1)high tensile strength and elongation; (2)low relaxation value; (3)small stress losing; (4)excellent durable anti-fatigue performance. High Tensile 12.7mm Steel PC Strand Wire Our company can produce various models according to different standards of products, specifications are as follows: (1) Steel Strand for PC Concrete GB/T5224: 17-9.5mm/11.1mm/12.7mm/15.2mm/15.7mm/17.8mm/21.6mm; ASTM416 17-7.9mm/9.53mm/11.11mm/12.7mm/13.2mm/14.29mm/15.24mm/17.8mm; BS 5896 17-8.0mm/9.3mm/9.6mm/11.0mm/12.5mm/12.9mm/15.2mm/15.7mm; JIS G3536 17-12.7mm/15.2mm; UNE 36094 17-9.3mm/13.0mm/15.2mm; KS D 17-9.5mm/11.1.0mm/12.7mm/15.2mm; AS/NZS4672 9.5mm(7 wire)/12.7nn/15.2mm; (2) Unbonded PC Strand 1x7-9.5mm/12.7mm/15.2mm/15.7mm. (3) Prestressed Steel Wire Plain steel wire for prestressed concrete/indented wire /spiral rib steel wire 3.0mm/4.0mm/4.8mm/5.0mm/6.0mm/6.25mm/7.0mm/8.0mm/9.0mm/10.0mm/12mm High Tensile 12.7mm Steel PC Strand Wire INTRODUCTIONA branch factory of HENGXING group (listed in 2007)Professional on PC Steel Strand manufacturingAn annual output of 300,000 tons ISO management certificatedChina National construction steel quality supervision and test center certificated Cooperated with National railway for many years
High Quality 12.7mm Steel PC Strand Wire Structure:prestressed concrete 7-wire strand Standard: ASTM416 Nominal diameter:12.7 mm 15.2mm 21.8mm 23.5mm prestressed concrete 7-wire strand Tensile strength:1860 Mpa Application:Bridge,highways,airports,sports venues and other infrastructure areas. A branch factory of HENGXING group (listed in 2007) Professional on PC Steel Strand manufacturing An annual output of 300,000 tons ISO management certificated China National construction steel quality supervision and test center certificated Cooperated with National railway for many years
Item: GSW Steel Wire Rope Certificate Material: high carbon steel Galvanized steel wire size: Φ1.44mm-4.770mm. Strand size:7�(1.44-4.2);19�(1.44-3.5); 37�(1.44-3.5) Tensile strength: different Grade from min.1470 N/mm2 to min.1960N/mm2. Zinc coating: According to ASTM A475 Class A. Packing: larger coil,as per customer's requirement A branch factory of HENGXING group(listed in 2007) Professional on Galvanized Strand manufacturing An annual output of 7wire :240,000 tons 19wire:120,000 tons 37wire:60,000 tons ISO management :ISO9001:2008 ISO18001 ISO14001 Exported countries: over 40 countries or regions
GSW Steel Wire Rope Certificate Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
4.77mm electrical cable steel wire Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above Excellent Mechanical Properties 4.77mm electrical cable steel wire -------- (1)Meets or exceeds ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189; (2)Clean and firm hot-dip zinc coating; (3)Shining surface ; (4) Excellent corrosion resistance. INTRODUCTION 4.77mm electrical cable steel wire A branch factory of HENGXING group(listed in 2007) Professional on Galvanized Strand manufacturing An annual output of 7wire :240,000 tons 19wire:120,000 tons 37wire:60,000 tons ISO management :ISO9001:2008 ISO18001 ISO14001 Exported countries: over 40 countries or regions http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Factory direct sale galvanized steel wire, durable & reliable. can customized according to your requirement, without third party, Contact Us Now! Global Supply. On-Time Delivery. 15 Years exporting. SGS, BV Testing. Brands: low price for sale, welding cable supplier.
galvanized steel wire 2.5mm Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Hot Dipped Galvanized Wire For Stay Wire Diameter: 1.80mm, 2.65mm, 3.25mm, 4.00mm Min. Tensile strength: 450Mpa or 700Mpa or 1100Mpa or 1570Mpa or 1770Mpa Zinc Coating: according to BS443( BS EN 10244-2:2001) Material: carbon steel Standard:IS: 2141, BS:183 Packing: coils or reels
1x7 12.7mm 1860Mpa Steel PC Strand Wire Structure:prestressed concrete 7-wire strand Standard: ASTM416 Nominal diameter:12.7 mm 15.2mm 21.8mm 23.5mm prestressed concrete 7-wire strand Tensile strength:1860 Mpa Application:Bridge,highways,airports,sports venues and other infrastructure areas. A branch factory of HENGXING group (listed in 2007) Professional on PC Steel Strand manufacturing An annual output of 300,000 tons ISO management certificated China National construction steel quality supervision and test center certificated Cooperated with National railway for many years