ring type burner drilling machine
ball cage drilling machine 40mm to 400mm length drilling for brass and aluminum material
Model FZK-20 Max drilling diameter 200MM Max drilling depth 700MM Output speed 800 1200RPM Engine type Gasoline engine, air-cooled, 4 stroke, single cylinder Power 13.0HP Weight 110kg Packing Size 1400*900*1500MM
Packaging Details 1. Normal packing: plywood case, wooden box or pallet 2. Suitable for ocean shipping and air shipping. 3. Max. weight for each package: 1500 Kg 4. Special packing requirements should be known in advance. 5. Custom packing is available. Blowout preventer (BOP) BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead. Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud. Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells. BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP part name: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. Apply to below BOP: Brand: SK BOP. RS BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Working pressure: 2000psi-15000psi(14 Mpa-105Mpa) Operating temperature: -18deg--121deg Bore size: 7 1/16-21 1/4 Top & nottom connection: Flanged,studded
Y24 Rock Drilling Machine Introduction: Most suitable for drilling downward and inclined blast-holes in medium nard and hard rock with a hardness of f=8~18: An ideal tool for rock drilling operations in small open-pit quarries, mines, water conservancy projects and road building in hilly areas, etc, and for secondary blasting in large mines.The incorporation of FY200B Line Oiler with transparent casing provides automatic lubrication during operation during operation. Features: Grouped control mechanism, quick to start up with"air-on, water-on, air-off"mechanism, easy operation and maintenance. In addition to having the excellent performance of YT24, it has stronger flushing power.
1.Patented hydraulic system"Auto. discharging chips","Auto. breaking chips" device-optional attachment. 2.Ideal to equip with multi-spindle drilling head to enhance production efficiency. 3.Available on reaming, more suitable for deep hole drilling.
The PDTHR-200 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The DTHR-200 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves Drill rod handling :10 feet (3.0 meter) - 15 feet (4.5 meter) Drilling depth : 650 feet (200 meters) Drilling diameter : 4.5 inch (114 mm) - 8 inch (203 mm) Pull up force : 5,000 kgf Drill head torque: 255 kg.m Air compressor : 1100 cfm/300 psi Mud pump : 300 lpm - 500 lpm Carrier : Truck(Optional: Skid)
Paper Drilling Machine with 1400 rm drill bit sped and stroke speed of 11 or 22 strokes per minute obtains fine results o different kinds of paper and is fitted with the automatic table-lift system. Equipped with 4 drilling heads, its capable of drilling from 3mm to 14mm.
BTA gun drilling machine is a column moving type equipped with gun drilling function with a small diameter and the BTA function with a large diameter or a combination. Spindles are available in 1 or 2 spindle configurations and work independently. This high precision and high strength spindle unit and applying an exclusive telescopic chip cute with a high torque driving system.
Production Description This machine is used for punching on paper tube. It is easy operate and efficient.
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 670 Spindle travel 145 Spindle nose to base 650 Dia. of column 130 Dia. of RAM 72 Size of table 290 x 235 x 235 Overall base size 930 x 635 No. of spindle speed (8 speed) 105 to 2650 RPM Taper in spindle base MT-3 Machine area of base 660 x 500 Drill motor (gear drive) 1 HP & 0.5 HP Total height 1425 V-Belt size A-23, B-50 Net Weight 450 Kgs
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 205 Spindle travel 145 Dia. of column 90 Dia. of RAM 72 Size of table 250 x 460 No. of spindle speed (8 speed) 105 to 2650 RPM Taper in spindle base MT-3 Drill Motor (gear drive) 1 HP Total height 1425 V-Belt size B-49 Longitudinal Travel 400 Cross Travel 206 Net Weight 400 Kgs
Drilling cap. In Steel 38 Drilling cap. C. I. 45 Tapping in M. S. 15 Spindle center to col. 320 Spindle travel 240 Spindle nose to base 1000 Dia. of column 121 Dia. of RAM 72 Size of Sq. Table 375 x 475 Overall base size 720 x 470 No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 230 Spindle travel 145 Spindle nose to base 1000 Dia. of column 90 Dia. of RAM 72 Size of Round Table 365 Overall base size 570 x 345 No. of spindle speed (8 speed) 105 to 2650 Taper in spindle base MT-3 Machine area of base 260 x 350 Drill motor (gear drive) 1 HP 1440 RPM Total height of machine 1625 V-Belt size B-49 Net Weight 200 Kgs.
Our laboratory core drilling machine / pavement core drilling machine is suitable to drill / cut cores of concrete, rocks, stones, tiles or the similar material. This core drilling machine is the most efficient light weight, portable unit & has been designed specifically for the purpose of drilling test cores / holes in concrete / bitumen from road, bridges & airport runways etc. The machine is suitable for core samples of size up to 150 mm diameter with the help of thin walled diamond bits which are at extra cost. The drill portion is supported on two columns. The machine has two speed driven by ‘v’ belt & has arrangement of water tank for coolant purpose. The machine is mounted on a light weight, but strong steel base & the base is mounted on two tyres for easy towing on road by car / van / jeep. While drilling it can be mounted on four bolts for jacking. The machine has two versions: 1. One is motorized which is fitted with 3 h. P. Electric motor suitable to operate on 230 volts ac, single phase. 2. Another is diesel engine driven which is fitted with 4 or 5 h. P diesel engine. Accessories: 1. Thin wall diamond bits. 2. Core barrel
Model DM20CNC Max. drilling capacity: 20mm Max. face milling capacity : 63mm Max. end milling capacity : 20mm Spindle taper : MT2 T-slot size/distance/No : 12mm/63mm/3 Table size : 500x180mm z travel : 275mm Y travel : 135mm x travel : 300mm Rate of feed z axis : 2000mm Rate of feed y axis : 3000mm Rate of feed x axis : 3000mm spindle speed 80-3500rpm(vario speed) positioning accuracy 0.02/300mm Rep positioning accuracy 0.01mm X stepping motor torque 3N. M Y stepping motor torque 3N. M Z stepping motor torque 4N. M Spindle motor power 600W/380V~50HZ 850W/220V~50HZ. N. W /G. W 300kg /340kg Packing size 1300*1000*1680mm.
Air suction motor power: P2=4kw Motor power: P=1.5x16kw=24kw Drilling length: L=2440mm Hydraulic station power : 3Kw Drilling depth: H=35mm Processing width: B=1220mm Drill row wheelbase: A=32mm Drill row by row distance: P=64mm Air pressure : P=0.6-0.8Mpa Drillng shaft number : N=20x8=160pcs Weight of machine: G=3800 kgs Exterior dimensions: 4000x2400x1800mm. Wooden case.
Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed SPECIFICATIONGS ZQ3050++-16 Max.drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1150 Distance between spindle axis and column surface(mm) 360-1600 Spindle travel (mm) 220 Spindle Cone 5 Spinde speeds range(r.p.m) 78++++ 135++++240++++350++++590++++1100 Spinde speed step 6 Spinde feeding range(r.p.m) 0.10-0.56 Spinde feeding step 6 Rocker rotary angle 360 Main motor power(KW) 4 Movements motor power(KW) 1.5 N.W/G.W(Kg) 2800 Overall dimensions(mm) 2170++-950++-2450.
Specification h-9150 Max.Drilling capacity °35mm Spindie taper mt4.Nt40 Spindle travel 150mm Spindle speed 3s 100.200.300 Variable speed 500-2000mm Swing 520mm Table diameter 600*800mm Column diameter °115mm Distance from spindle to table 350-700mm Motor hp 3hp Hydraulic power /cm¦ 20/cm¦ Overall height 210mm Weight 700 kg Specification h-7150 Max. Drilling capacity °25mm Spindie taper mt3.Nt30 Spindle travel 150mm Spindle speed 3s 500.1000.1500 Swing 460mm Table diameter 600*800mm Column diameter °102mm Distance from spindle to table 350-700mm Motor hp 2hp Hydraulic power /cm¦ 20 /cm¦ Overall height 2100mm Weight 600 kg Specification h-6150 Max. Drilling capacity °16mm Spindie taper mt2 Spindle travel 150mm Spindle speed 3s 1000.1500.2000 Swing °460mm Table diameter 600*800mm Column diameter °102mm Distance from spindle to table 100-700mm Motor hp 2hp Hydraulic power /cm¦ 20/cm¦ Overall height 1800mm Weight 380 kg Specification h-5100 Max. Drilling capacity °10mm Spindie taper jt6 Spindle travel 100mm Spindle speed 3s 1000.2000.3000 Swing °360mm Table diameter 450*600mm Column diameter °80mm Distance from spindle to table 100-400mm Motor hp 1hp Hydraulic power /cm¦ 20/cm¦ Overall height 1600mm Weight 260 kg
Model hl super tech 2 Features * Magnet base size û 355 x 115 x 80mm * Magnet surface/pole apoxy sealed/two pole * Drilling capacity û 19mm, 25mm, 32mm * 2with broach cutter type drill m/c upto100mm * magnet holding power - 2300 kg. * power source - ac 220v 50hz * height û 550mm * stroke û 300mm
