Ceramic Fiber product is made from long flexible bulk fiber which is a high temperature fire resistance material containing of pure alumina, silica & zirconia. It is used for various applications some of are reformer of furnace, tube seal, gasket & expansion joint, high temperature pipe, duct, turbine insulations, kiln car insulations & seals, boiler insulation and many more insulation purposes.
PE (Polyethylene) Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It has a closed cell and cross linked structure. It has an excellent recovery of 95% (after compression upto 50% of original thickness), which makes it the most suitable product for the said usage. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is also rot free and has no bitumen. What are the features and advantages of filler board? Resilient â?? Our EJF boards delivers 95% compression recovery after deflection (compression), that it is the most important and excellent attribute for any expansion joint filler boards. Weathering Effect â?? Joint filler board is resilient and additionally absolutely does not distort under less load transfer from wet concrete. Closed cellular composition â?? Very low water absorption consequently non deteriorating and also resilient Bitumen free â?? Non-staining and easy to apply. Chemically Resistant â?? to almost all types of acids, alkalies and hydrocarbon group materials. Simple â?? Easy to handle, carry, load/unload, install. Load absorption is higher and transfers to the structures very little. What is the use of filler board? Expansion joints at airport runways and taxi tracks The next usage are in mall parking lots as well as structures Furthermore these are applied to Isolation Joints to infill sections In addition to water-proofing also used in concrete flooring. Water retaining as well as water eliminating structures Inter-connecting pathways between buildings Basements, flyovers as well as subways. These kind of boards used in concrete roads as well as toll plaza flooring. Bridges, verandas, abutments and pier hinge joints For more details please visit: https://www.kampun.com/expansion-joint-filler-boards-kampun-hd100-board/
1, Product Performance: Expansion joint rubber bellows consists of rubber ball, U-shaped loop coupling flange, the rubber ball contains inner rubber lining, outer rubber lining, reinforced lining, T-shaped or L-shaped strengthening ring. It is mainly used for the flange connection of valves and equipment for compensation for deformation and equipment protection. 2, Product Applications: Due to the expansion joint rubber bellows has good comprehensive performance, mainly used for lifting and conveying, raw water and sewage water of coal-fired power plants, cooling circulation water, condensed water slurry circulation, metallurgical industry, chemical industry chemical pipelines, cooling of the petrochemical industry, the length of the dilution and other industries flexible connection between the distance line. Because the rubber has high wear resistance, but also applies to all industries of granular and powdered and gas transport in low temperature. In addition, in order to guarantee the construction quality, designers and users warned, if the product is installed close to exit of a pump or at the corner of pipes, a caging devices against disjunction must be noted for installation. In general, if there is any hidden trouble in your operation, relevant operation conditions must be noted in your order, and you will get a satisfactory reply. 3, Product Advantages: Single sphere expansion joint rubber bellows has good elasticity and long service life, especially for some installation environment is harsh environment have a good ability to adapt. Installed on the pipeline can be achieved for pipeline axial, lateral and angular displacement compensation, guarantee the pipeline safe operation, so as to prolong the service life of pipelines.
We are leading manufacturer & exporter of Metallic & Non Metallic Bellows in India We are among few manufacturer in India who manufacture full range of Bellows Metallic, Non Metallic, Round, Rectangular, Fabric, Canvas, EPDM, Cloth, Multiply, Singleply. We manufacture Bellows suitable for any typed of application.We are an ISO 9001.2015 certified company and are manufacturing Bellows from ID 25 MM to ID 2500 MM. Non Metallic Bellow are largely used where large amount of movement lateral, axial are required . It can be manufacture to absorb temperature upto 1200C and suitable for low pressure.
We are manufacturers all kind of metallic expansion bellows and bellows hose
Expansion Bellow
Description Solid wood flooring,Solid wood flooring, also known as wooden flooring, is a floor block made directly from natural solid wood. Solid wood flooring is divided into flat mouth flooring, tongue and groove flooring, finger jointed flooring, and integrated finger jointed flooring according to different processing shapes.Material tree species: Natural trees, including precious ones such as rosewood and teak, more common ones such as maple, oak, and water chestnut, and cheaper ones such as fir and pine.Stability: Relatively weak, prone to warping and cracking due to environmental thermal expansion and contraction.Application locations: bedroom, living room, study
Available types of POM Compound plastic Colored POM POM GF Reinforced Fiberglass Application Applications of POM Compound plastic pellets include Industrial Machinery and Tool Parts POM Compound is commonly used to produce industrial machine and tool parts such as gears shafts bearings seals and friction components Automotive and transportation applications In the automotive industry POM Compound is used in the production of parts such as door seals transmission gears and other mechanical components Applications in the electronics industry POM Compound is also used in the production of electronic parts such as joints mechanical structures and other electronic components With stable mechanical and chemical properties along with good friction and heat resistance POM Compound plastic pellets are a popular choice in many industrial applications requiring high technical properties
Expansion joint,Expansion joint Supplier Size : DN50~DN1000  Pressure : Max 4.0 Mpa  Bellows : Carbon Steel / Stainless Steel  Other parts : Carbon Steel / Stainless Steel
Expansion joint Expansion joint can also be called pipe expansion joint, compensator, expansion. Expansion joint is divided into: corrugated expansion joint, sleeve expansion joint, square natural compensation expansion joint and other major types, 1. Compensation for expansion deformation caused by heating of absorption pipeline in axial, lateral and angular directions. 2. Absorb equipment vibration to reduce the influence of equipment vibration on pipeline. 3. The amount of deformation of pipelines by absorbing earthquake and subsidence. Because of the heat expansion and cold contraction of the pipe, so for the pipe, it is necessary to produce the stress and push tension of the pipe wall; The stress on the wall of the pipe affects the strength of the pipe, and the push and pull force increases. The fixed bracket of the pipe should be made large to withstand the push and pull force generated by the pipe expansion. Therefore, the variable opening method compensated by the ductile iron pipe mechanical joint fittings is used to reduce the stress and thrust of the pipe wall. The expansion joint is mainly used to compensate the expansion deformation caused by the temperature change of the pipeline, and also to compensate the length of the pipeline due to the installation and adjustment. It is mainly divided into three structural forms: wholesale elbow expansion joint, bellows expansion joint and casing expansion joint.
Manufacture all type of metal bellows made from stainless steel grades. We manufacture both circular and ducting square/rectangular bellows as per customer requirement.
Expansion joints used on ships(DN100mm) 1.DN: 8mm-10000mm 2.Material: Carbon steel, Titanium, Zirconium, Hastelloy, Nickel alloys, Duplex Steel and Austenitic Stainless Steel 3.Thickness: 0.15mm-70mm 4.Forming method: Hydraulic forming 5.Pressure(MPa):-10 to +10 6.shape: U V 7.Temp.(oC): -196 to 1400. Name Nominal diameter DN(mm) Plies Forming method Convolutions Pressure (Mpa) shape Temp. () Bellows for pressure vessel ¦µ150-¦µ4500 1-6 Hydraulic forming 1-4 -10 to +10 U ¦¸ -100 to 1250 Bellows expansion joint ¦µ8-¦µ10000 1-70 Hydraulic forming Roll forming 1-16 -10 to +10 U ¦¸ V -196 to 1400 With insulation sleeve Rectangular expansion joint(fabric) Any dimension 3-10 Press-brake forming 1-4 -0.2 to +0.2 U. Wooden case.
Expansion joint Custom made Various
Product Features of Rubber Expansion Joint To provide stress relief in ducting system by absorbing any difference in dimension caused by thermal change. To protect equipment by reducing equipment vibration. To provide simple connection of misaligned pipes. Accommodate expansion and contraction movement in axial, lateral and angular direction. Prevent the propagation of electricity Dampen sound transmission Materials Rubber : Neoprene, Nitrile, EPDM, Natural, Butyl, Hypalon, Silicone, SBR, Flurocarbon rubber Fabrics : Canvas, Rayan, Polyester, Nylon, Glass Fabric Metal Flanges : Stainless Steel, MS, Aluminium Type, Size and Pressure Rating Type : Single arch type, multi arch type, sleeve, Joint type, Enlarge Flange type, wide arch type. Size : 50 to 3000 mm Pressure (base on dia) : Upto 25 kg/cm2 Permissible movement : Axial (compression) - upto 200 mm Axial (elongation) - upto 75 mm Transverse - upto 75 mm Face to Face length : 50 to 700 mm
Bellows, expansion joints, flexible joints, compensator.
Aluminum Wall Support Ladder is a non-self-supporting portable ladder that consists of two stiles and several rungs. Single or Straight Ladders can be manufactured using different materials, the rungs can be riveted, swaged, or glued and they come in various ranges. SPECIFICATIONS: Heavy Duty with High-Grade Aluminum Slip Resistant D Rungs Step Rung Distance 280mm Box Section with Size 60X25X2.5 mm Both sides High-Grade Rubber Shoe FEATURES: High-strength quality crimpled connection between rungs and slits Rungs and Slits are extruded from High-grade Aluminum sections Anti-skid D Rungs with a pitch of 280mm step difference Standard Ladder outside width 420mm. Low-height option is also available with 350mm outside width Light-weight and extremely stable Anti-skip pads made of high-quality rubber at the end of ladders to ensure safety and stability
Wedge-All anchors are a wedge style expansion anchor for use in solid concrete or grout filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The hole size is the same as the anchor size. Includes nut and flat washer. 303/304 Stainless Steel for marine, industrial and general construction.
Welcome to A.S Engineers & Fabricators, where innovation meets excellence. We are thrilled to introduce our latest breakthrough: the Heat Exchanger. Engineered with precision and crafted with care, our Heat Exchanger is poised to redefine the standards of heat transfer efficiency in diverse industrial applications. In today's dynamic industrial landscape, optimizing heat transfer is essential for enhancing productivity, reducing energy consumption, and ensuring the reliability of critical processes. With this in mind, our team at A.S Engineers & Fabricators has developed a state-of-the-art Heat Exchanger that promises unmatched performance and reliability. MOC:- SS304,SS316,SS316l,Carbon Steel Strategies by heat Exchanger Fluid Selection: Choose the right fluids based on their thermal conductivity and heat capacity to maximize heat transfer efficiency. Matching the properties of the fluids to the application ensures optimal performance. Flow Control: Implement proper flow control mechanisms to regulate the movement of fluids within the Heat Exchanger. This ensures uniform heat distribution and prevents the formation of hot spots or cold spots, enhancing overall efficiency. Temperature Monitoring: Utilize advanced temperature monitoring systems to continuously monitor the temperature of the fluids entering and exiting the Heat Exchanger. This allows for real-time adjustments to optimize heat transfer performance and maintain desired operating conditions Efficient Heat Transfer Our heat exchanger ensures efficient transfer of heat between two fluids, allowing you to maintain optimal temperatures in your processes Cost-Effective Solution By effectively utilizing heat exchange principles, our product helps you save on energy costs, making it a cost-effective solution for your operations Enhanced Performance With improved heat transfer efficiency, our heat exchanger boosts the performance of your equipment and processes, leading to increased productivity Customizable Designs We offer customizable designs tailored to your specific requirements, ensuring that our heat exchanger seamlessly integrates into your existing systems Durable Construction Built with high-quality materials and precision engineering, our heat exchanger is durable and reliable, providing long-lasting performance in demanding industrial environments Easy Maintenance Designed for easy maintenance and servicing, our heat exchanger minimizes downtime and ensures smooth operation, allowing you to focus on your core business activities
Introducing the Elliptical Dish End/Head from A.S Engineers & Fabricators it's a top-notch product that we've worked hard on for years. Our dish end is like a super durable lid for big machines used in factories and other places. We've paid extra attention to make sure it's just right for tough jobs. It's made from really good materials and can be customized to fit different needs. Trust us, with our 36 years of experience, we've got you covered when it comes to high-quality dish ends Strategies by Elliptical Dish End/Head At A.S Engineers & Fabricators, we focus on delivering two distinct product lines: Prime Build and Value Build. Prime Build caters to customers seeking customized features, ensuring their unique requirements are met with precision. On the other hand, Value Build offers economical solutions for those prioritizing cost-effectiveness without compromising on quality. Advantages Our Elliptical Dish End/Head offers numerous advantages, including Enhanced Performance Optimizes industrial processes, contributing to increased efficiency and productivity Durability Crafted from premium materials, ensuring longevity and reliability. Cost-Effectiveness Competitive pricing combined with superior quality delivers unmatched value to our customers Customization Tailored to meet specific project needs, providing flexibility and adaptability
Welcome to A.S Engineers & Fabricators, your trusted partner for quality powder coating solutions. Powder coating is a versatile and durable finishing process that provides a smooth, uniform, and high-quality surface to metal products. At A.S Engineers & Fabricators, we specialize in providing expert powder coating services to enhance the appearance and longevity of your products. Our state-of-the-art facilities and experienced team ensure precise application and superior results, whether you need powder coating for industrial equipment, automotive parts, or architectural components. With a wide range of colors and finishes available, we can customize the coating to meet your specific requirements and aesthetic preferences. Experience the benefits of powder coating with A.S Engineers & Fabricators â?? where quality meets excellence Durability Powder coating creates a durable and tough finish that is resistant to chipping, scratching, fading, and corrosion. This makes it ideal for products exposed to harsh environments or heavy use Uniform Finish Powder coating provides a smooth and consistent finish without drips, runs, or sags. This uniformity enhances the appearance of the product and ensures a professional look Wide Range of Colors and Finishes There is a vast selection of colors, textures, and finishes available in powder coating, allowing for customization to match any design or aesthetic requirement. Environmentally Friendly Powder coating is an environmentally friendly process as it produces minimal waste and contains no solvents or volatile organic compounds (VOCs). It also generates less hazardous waste compared to liquid paints. Cost-Effectiveness While the initial investment in equipment and setup may be higher, powder coating offers long-term cost savings due to its durability and reduced maintenance requirements Fast Processing Powder coating typically requires shorter processing times compared to traditional painting methods. Once the coating is applied, it can be quickly cured, resulting in faster turnaround times for finished products Key Features Durable Finish: Powder coating provides a durable and resilient finish that is resistant to chipping, scratching, and fading, ensuring long-lasting protection for the coated surface. Wide Range of Colors and Finishes: With an extensive selection of colors, textures, and finishes available, powder coating allows for customization to match any design or aesthetic requirement.
