1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
Three Phase Induction Motor Speed Controller Trainer - BRAND - VIJAYANTA, INDIA 1. Study of Three Phase Induction Motor Speed Controller Trainer, With motor generator set, DC shunt generator, 1 KW, AC Sliping Motor 1 HP., Model: TPAC â?? 401 Suitable for to study speed control of three phase induction motor using Three phase AC Voltage Controller.
Induction Motor (b-5 Flange Mounted)
On grid / Grid-tied Rated power: 4200W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*153mm Net weight: 13.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 4600W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*173mm Net weight: 14.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*173mm Net weight: 14.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
High Frequency On grid / Grid-tied Rated power: 6000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Single phase Warranty: 10 years Dimension(W/H/D): 355*412*201mm Net weight: 16.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
Single-phase induction motors main winding is supplied with a single -phase A.C. current. This produces fluctuating magnetic flux around the rotor. This means as the direction of the A.C. current changes, the direction of the generated magnetic field changes. Features: Optimum design, which helps in overall improved performance of the motor. Continuous duty, motor capable of continuous operation at their rated power with a temperature rise within the specified insulation temperature class. Class F insulation (materials possessing a degree of thermal stability allowing them to be operated at temperatures higher than Class B materials). Benefits: High efficiencies increase energy savings and reduce operating costs to all leading brands of medium voltage drives, providing years of trouble-free operation. Get the best price of Single Phase Electric Motor.
Mc series aluminum housing single-phase capacitor-started induction motor, with latest design in entirety, are made of selected quality materials and to iec standard. Mc motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noise, little vibration and the same time of light weight and simple construction. These series motors can be used for air-compressor, pump, refrigerator, medical apparatus and instrument, and many other machines needing full-load start.
Jy series single-phase capacitor start induction motor is suitable for any where a larger starting torque and starting current to be limited are required, and is used as driving motor of air compressors, refrigerators, medical apparatus and other small machines in which full-load starting is demanded. These series motors are of totally enclosed fan-cooled and having three frame sizes 0.9, 1 and 2. The frame are made of made of cast iron or cast aluminum according to requests. Protection type:ip44 insulation class: b Cooling type:ico141 rated frequency:50hz
Ml series aluminum housing single-phase two-value capacitor induction motor which adopting the latest design and high quality material. And conform to the iec standard in europe, and eff1 standard if request. The motor has a lot of advantages including high efficiency, energy saving, low noise, little vibration, light weight, convenient operation and maintenance. The motor with removable feet is made of aluminum-alloy die casting, user could various mounting mode available. The series motor are fit for the common sites and concise machines that has no special requirements including, air-compressor, pump, fan, medical apparatus and instruments, small machines, etc.
My series aluminum housing single-phase capacitor-run induction motor, with latest design in entirety, are made of selected quality materials and to the iec standard. My motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noise, little vibration, light weight and simple construction. These series motors can be used for home electric appliance, pump, fans, and recording meters, etc.
Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
YC series heavy-duty single-phase motors of "Willda" brand are suitable for small size machine tools and water pumps, especially suitable for family workshops where only single-phase power be supplied. This series motors are designed with the latest technology, manufactured with the quality materials, have following features: good performance, safe and reliable operation, nice appearance, convenient maintenance, meet the IEC standards. YC series motors are of IP44 totally enclosed fan-cooled (TEFC) type, capacitor starting for rated output up to 3HP, on rated voltage and 50Hz, the starting torque is three times more than the rated torque while 60Hz is 2.75 times more. Capacitors start and run type for Motors 4HP and above, it have following features: high starting torque, smooth running, low temperature rise, low noise and greater overload performance. YC motor is notable for its safty and energy-saving, lower price with nice operation YC motor suitable for air compressor, water pump and other equipment requiring high torque. This series electric motor features by its high starting performance, overload capability, power factor and efficiency, low noise, light weight, little shape and easy maintance. Operating Conditions Ambient temperature: -15¡Ü¦È¡Ü40 Altitude:Not exceeding 1000meters Rated voltage: 220V plusmn;5% Rated frequency: 50Hz or 60Hz Duty/Rating: Continuous running Insulation class:Class B Protection class:IP44/IP54 Cooling method:IC411. Seaworthy packing, wooden crates, cartons.
Detailed production description: 1) Adopting the national uniform design, YS (AO2) series three-phase induction motors are in compliance with the standard of IEC. 2) According to dear guests' requirements, we can supply aluminum or iron frame. 3) It possess sophisticated features such as new construction, good appearance, outstanding performance, little consumption, slight vibration and reliable operation. 4) It's the power equipment for small-size machine tools, medical instrument, household electric appliance, food machine and so on.
Hm2 series three-phase induction motors was introduced as an updated design, basically in conformity with iec standard, but also combining the design of y series, y2 series of china.Hm2 series motors with good function of enery saving can reach the limit the value of energy efficiency standards of small and medium-sized three-phase induction motor in china and eu-cemep eff2. Designs have applied for national patent. Patent number: zl2004 3 0046836.2. Hm2 series motors with the mounting dimension in accordance with standard iec60034, is identical to the mounting dimension of y series, y2 series. It has good features like optimum structure unique appearance low noise high protection class as well as high insulation class hm2 series motors can be widely used in various kinds of general use machineries like fans, pumps, machine tools, compressors, transportation machine and so on .And can also be used in the hazardous areas with oil and chemical, steel plants , mining industry, hm2 series motors are y series y2 series ideal substitution products. Output: 0.37- 355kw Model no.: hm2 series Product origin: China Brand name: huali Price terms: FOB, CFR, CIF Payment terms: t/t, l/c Supply ability: 20000 sets/month Minimum order: 10sets Delivery lead time: 45 days
Superseding the old generation of series yb, series yb2 flameproof three phase induction motors, the frame sizes are from 80-355, the basic series of flameproof motors are developed and manufactured by our company. This series motors are of remarkable features, such as light weight, compact construction, attractive appearance, safe and reliable operation, long operation life, excellent performance and easy maintenance. Little vibration, low noise
Y2 series three-phase induction motors, deveploped with new techniques, are renewal and upgrading products of Y series. Y2 series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact structure, low noise, high efficiency, large torque, excellent starting performance, easy serving, ect. The motors are adopted with F class insulation and designed with assessing method for insulation system according to intermational practice, it enhances greatly motor's safely and reliability, therefore, these motor's have reached an international advanced level of the such kind products at the initial days of the 90s. Y2 series motors can be widely used as driving equipments of various machineries, such as, machine tools, blowers, pumps, compressors, transporters, agricultural and food processing. Operating Conditions Ambient temperature: -15celsius
On grid / Grid-tied Rated power: 3000W No. of MPPT: 1 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 262*368*155mm Net weight: 10kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 3600W No. of MPPT: 2 Strings per MPPT: 1 Phase: Single phase Warranty: 10 years Dimension(W/H/D): 355*412*153mm Net weight: 13.5kgs LED display
