Brys Series Bronze Y Strainers Suppliers and Manufacturers

Design Standard: JIS F7220Q-1996 Test Standard: JIS 7200-1996 Hydraulic Test Pressure: Body- 1.05Mpa Flange size as per JIS B2220 - 5K Main Material: 1.Body: Bronze (BC6) 2.Bonnet: Bronze (BC6) 3.Strainer: Stainless Steel (SUS304) 4.Gasket: non-asbestos

Features and Benefits Screen is punched stainless steel plate Screen is supported by screen support for DN150 and above, this device protects the screen from potential damage. Large filter area: lower pressure drop. Electrostatically applied Akzo Nobel epoxy powder internally and externally. Applicable Standards Connection standard: BS EN 1092-2 Pressure test standard: BS EN 12266-2003 Face to face standard: BS EN558-1 Series1 Technical Data Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16/25 Temperature range: -5C ~ +85 C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.

Product : Bronze Y-Type Strainer Type of Pattern : Y Type Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B Description : Y-Type Screwed in cover, SS 304 Screen having 0.5mm Dia perforations End Details : Screwed female BSP Taper threads to BS 21. Testing & Certification Hydraulic Test Pressure : 500 Psig.Hyd. Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm ) Maximum Working Temperature : 435 F (225 C) Test Certificate in Form lll-C as per IBR is furnished with every supply. (APS Marines & Logistics)

Product : Bronze Y-Type Strainer Type of Pattern : Y Type Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B Description : Y-Type Screwed in cover, SS 304 Screen having 0.5mm Dia perforations End Details : Flanges as per BS 10 Table H F.F. undrilled Testing & Certification Hydraulic Test Pressure : 500 Psig.Hyd. Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm) Maximum Working Temperature : 435 F (225 C) Test Certificate in Form lll-C as per IBR is furnished with every supply. (APS Marines & Logistics)

PHYSICAL PROPERTIES Properties BC-SR Conc BC-VX Conc BC-PL Series BC-HTR Series Specific Gravity 1.38 1.35 1.38 1.2 Average Particle Size,Microns 4 - 6 3 - 4 15 5 - 6 Softening Point Deg.C 155 - 165 130 - 140 90 - 110 125 - 135 Decomposition Point Deg.C > 200 > 200 > 290 > 300 Heat Stability Deg.C - - 240 270 - 290 Solvent Resistance Very Good Poor - APPLICATIONS Paper Coating Water Base R R Solvent Base R Textile Printing R R Dyeing R Paints/Inks Water Base R M Solvent Base R Plastics M R R PVC Plastisols R M Wax Candles & R M Modeling Wax Clay Colouring R R Miscellaneous Art & Craft R R Banners R R R = Recommended M = May Be Used (After Trial) BC-SR Conc. Series : Thermosetting type of high strength pigments with fine particle size,used for Solvent/Water Based Paints,Inks,Papercoating,Textile,Plastisols,Crayons,Plastics etc. Applications. Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R),Red Orange,R.Red,Pink(B), Pink(M),Pink(S),Magenta(S), Magenta(R), Magenta(B),Violet(B),Violet(R),Royal Blue,Peacock Blue BC-VX Conc.Series : Brillaint,high strength series with very fine particle size used for Textile-Printing, Oil/Water Based Paints/Papercoating etc. applications. Shades : Saturn Yellow,Brilliant Yellow,Z.Yellow,Bright Yellow,Geneva Green,Glow Green, Glow Green(S),Deep Green,Jet Green,Golden Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R), Orange(S),Red Orange,R.Red, Rich Orange(Y), Rich Orange(R),Arch Chrome,Pink(B),Pink(M),Pink(S),Magenta(S),Magenta(R), Magenta(B), Violet(B),Violet(R),Royal Blue, Peacock Blue BC-PL Series : Thermoplastic polyester based,formaldehyde free,high strength colours,with good heat resistance which melt blend in plastics.These are Fluorescent Pigments specially made for Plastics Application (Execpt PVC calendering). Shades :Brilliant Yellow,Lemon Yellow,Green,Glow Green,Brill Green,Deep Green,Golden Yellow(Y), Golden Yellow(R), Orange(R),Orange(3R),Orange(4R),Orange(Y),Red Orange,Fire Orange,Red,Pink(B),Pink(2B),Pink(3B), Pink(4B), Pink(2R), Pink(R),Magenta(R),Magenta(S),Magenta(B),Blue,Royal Blue,Violet BC-HTR Series : Thermoplastic polyamide based,formaldehyde free,premium high strength colours, with excellent heat resistance,brillance & low mould plateout which meltblend in Plastics. Shades : Lemon Yellow,Green,Golden Yellow,Orange(Y),Orange(R),Red Orange,Red,Pink(R), Pink(B),Magenta

Features and Benefits Streamed-lined design in order to minimise pressure drop Stainless steel mesh Brass body with streamlined internal contour to minimise pressure drop across valve Robust and compact design Threads in accordance with BS EN 10226 (ISO7) or ISO 228 Applicable Standards Connection standard: ISO228 Technical Data Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16 Temperature range: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.

Fig. No. Y3202 ?¢Size: DN15-DN600 ?¢Design Standard: EN1074-3 ?¢Face to Face: EN558-1 Series 1 ?¢ Flange Drilling according to ISO228-1,BSPP ?¢Working Pressure: PN10.PN16 ?¢Hydralic Test according to EN12266-1, ISO5208 ?¢ Material conform to EN-GJS500-7. ?¢ Suitable for vertical installation

Size Range: DN50-DN600 End Flange: EN 1092-2 PN10/PN16 Working pressure PN10/16 Working temperature -10â?? - +80â?? Design: EN1074-3 Face to face: EN558-1 Test Standard: EN 12266-1 Coating: Inside & outside fusion bonded epoxy Application: water, sewage, neutral liquid and pump station -

Y-strainer ( 1/4" - 40") The main materials are stainless steel (304/304l/316/316l and forged ), carbon steel, and cast iron , etc. Y-strainer ( 1/4" - 40") The main materials are stainless steel (304/304l/316/316l and forged ), carbon steel, and cast iron , etc.

Y-strainers

All option mesh screen are available Monel screens Butt weld, thread and flange connections are available.

Screwed & Flanged End Size: 1/2"- 12" Material: CI, CS & SS These types of strainers are named after their shape and normally used for course filtration. But with large filtration area can be used with fine mesh also. Body of Y strainer is normally of cast iron or cast steel in various grades with flanged and socket weld type end connection.

Y Type Strainer (DGL01-TF02) Nominal Diameter: DN40-DN600 Nominal Pressure: PN 1.0/1.6 MPa End Standard: EN ISO GB BS DIN HG JB SANS GOST KSB JIS AS ASME Face to Face: Manufacturer's standard Testing: EN12266-1 1S05208 APl598

Y-Strainer Y Strainer Filter,Y Strainer Filter Supplier body/bonnet : FC  size             : 20A~200A

Components: O, brass body - brass alloy; 59% O, brass cap - brass alloy; 59% O, filtering element - stainless steel O, (mesh) O, seal - rubber Specification tu u 24.4-32869822-001:2014: •, environment - hot and cold water; •, brass body made of brass ËÑ 59; •, cylindrical thread; •, socket connection; •, working pressure 1, 6 Ìpà (16 kg/sm2); •, temperature +1200Ñ; Standard export packing

Y-type strainer We are specializing in production of all kind of strainers. Specifications:, 1) Sizes: 1/2 - 24", 2) Pressure class: 150 - 1500lb., 3) Suitable temperature: -196 ~ 600oc, 4) Suitable medium: water, gas, oil steam, nitric acid, acetic acid, 5) Material:WCB, WC6, WC9, LCB, LCC, CF8, CF8M, CF3, CF3M, 6)Screen: stainless steel, 7)End connection: FF, RF.THD, BW. Sea worthy package

1. Full diameter, large flow coefficient (Kv value Cv value) and full flow design. 2. Design of large flow and small flow resistance coefficient. 3. Low noise design. 4. High-strength design. 5. Easy maintenance, long life design. 6. The filter screen is designed to prevent it from falling out.

Material:  Body: cast iron/ductile iron  Bonnet: cast iron/ductile iron  Screen: stainless steel Design:  Face to face: DIN3202-F1  Flange drilled: DIN2501/DIN2533-PN16 Size: DN15-DN450

Cast Carbon Steel / Stainless Steel Valves Types: Gate Valve, Global Valve, Swing Check Valve, Ball Valve, Y-Strainer Rating: class 150, class 300, class 600, class 900, class 1,500, and class 2,500lps Materials: 1/2 to 2 inches: A105, LF2, F5, F11, F22, F304, F316, F304, and F316L 2 to 36 inches: WCB, LCB, WC6, WC9, C5, C12, CF3, CF8, CF3, and CF8M Design: API 600, API 603, API 6D, and ANSI B16.34 End flange: 2 to 24 inches to ANSI B16.5, 26 to 36 inches to MSS SP-44 Weld ends: ANSI B16.25 Face-to-face: ANSI B16.10 Shell and seat test: API 598