Product name: Lug Type Butterfly Valve (Series F101) Structure Feature: Centerline Design, With Pin Design: MSS SP-67, BS5155 and API 609 Connection Standard: ANSI, DIN, BS, JIS Working Pressure: PN0.6MPa to PN1.6MPa Size Range: 1-1/2inch to 48inch Operator: Lever, Worm Gear, Pneumatic, Electric Actuator Materials list: Body materials: Cast iron, ductile iron and stainless steel Disc: Ductile iron (with nickel-plated or nylon-coated), SS 304, 304L, 316, 316L Seat: PTFE Shaft: SS410, SS416 Pin: SS316 O ring: NBR, EPDM, neoprene and viton Bushing: PTFE, nylon and lubricated bronze
Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on
Standard Design: API609-83 Flange dimension: ASME B16.5 Face to face: ASME B16.10-1992 Pressure test: API 598-82 Parts Name Parts Material Body WCB/304/316/CF8M Disc WCB/304/316/CF8M Stem 316/2Cr13/1Cr18Ni9Ti Sealing 316/PTFE Packing Graphite/PTFE Main External and Connecting Dimensions API 815W/L DN L L1 H H0 D D1 D2 M Z-d Weight(kg) 2" 50 43 108 110 345 152 120.5 92 M18 4-19 9 3" 80 49 114 125 380 190 152.5 127 M18 4-19 11 4" 100 56 127 145 415 229 190.5 157 M18 8-19 13 5" 125 64 140 165 455 254 216 186 M20 8-22 16 6" 150 70 140 175 545 279 241.5 216 M20 8-22 26 8" 200 71 150 210 645 343 298.5 270 M20 8-22 34 10" 250 76 160 250 695 406 362 324 M24 12-25 51 12" 300 86 178 285 830 483 432 381 M24 12-25 72 14" 350 92 190 320 900 533 476 413 M27 12-29 106 16" 400 102 216 355 980 597 540 470 M27 16-29 133 18" 450 114 222 380 1030 635 578 533 M30 16-32 176 20" 500 127 229 415 1110 699 635 584 M30 20-32 190 24" 600 154 267 475 1305 813 749.5 692 M33 20-35 394 30" 750 165 292 580 1525 985 914 857 M33 28-35 476 32" 800 190 318 630 1585 1060 978 914 M39 28-41 618 36" 900 203 330 680 1765 1168 1085 1022 M39 32-41 762
We supply valves� for specialized fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. Types are Ball Valves, Gate Valve, Globe Valve, Swing NRV Valve, 3 Way Valve, Butterfly Valve, Wafer Check Valve, Disc Check Valve and Customize Valves too are in scope of supply.
1. Roasted Been, 2. Green Been Coffee, 3.Instant Tea, 4. Instant Coffee, 5. Blends Coffee, 6. Espresso Coffee Our Powdered Flavoring Series is designed specifically to allow you to customize all of your drinks and smoothies to the needs of your customer. Each delicious flavor offers a new choice to you customer, allowing them to customize their drink while simultaneously allowing you to expand your menu and offer more options! All of our powdered flavorings are of the highest quality and are manufactured in-house. Should you need the flavor adjusted we would be more than happy to help. We can even make new flavors just for you! Place of Origin Thailand Brand Name OEM Material 100% Arabica Shelve Life 24 months Age Group Coffee drinker Quantity 500gr paper box, 20 boxes/ 10 kgs shipping carton FOB Price USD$ 2 -5/ kg, FOB Terms T/T, Western Union Minimum Order Quantity 20 tons Production Capacity 1000 tons per month Package One-way valve Aluminum foil bag or One-way valve Kraft bag 250g /500g Delivery Time 10 - 15 days after receipt T/T, WHY SELECT US: + FAMILY OWN COMPANY, + FAST REACTION, OPEN DISCUSSION WITH CREATY, 24 HOURS POLICY TO ANSWER REQUESTS + GOOD QUALITY, LOW PRICE + STRONG FINANCIAL AND HIGHLY COMMITMENT ON DELIVERY TIME + MOST UPDATED ROASTING FACILITIES WITH BIG VOLUME PRODUCTION AND STABLE QUALITY
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
A Teflon lined butterfly valve is a cheaper & better option for various applications. DTech offers PTFE / FEP / PFA / PVDF lined Butterfly Valves. They are protecting the expensive equipment, extending the life of it and assuring superior performance. We are one of the pioneers of manufacturer, supplier, exporter, distributor and trader for lined Butterfly Valve Lug Type Gear Operated.
A Teflon lined butterfly valve is a cheaper & better option for various applications. DTech offers PTFE / FEP / PFA / PVDF lined Butterfly Valves. They are protecting the expensive equipment, extending the life of it and assuring superior performance. We are one of the pioneers of manufacturer, supplier, exporter, distributor and trader for lined Butterfly Valve Lug Type Lever Operated. Applications include: Water pipelines industry Petroleum Industry Chemical Industry Refineries Pulp and paper Industry Power plants Industry
From 40 mm to 300 mm dia butterfly valves, plug valves.
A butterfly valve is a shut-off valve with a relatively simple construction. In closed position, the disc blocks the valve bore while in open position, the disc is turned to allow flow. A quarter turn takes the valve from fully open to fully closed position, or opposite, and thus the butterfly valve allows for quick opening and closure. Butterfly valves can be used for a broad range of applications within water supply, wastewater treatment, fire protection and gas supply, in the chemical and oil industries, in fuel handling systems, power generation etc. Some of the advantages for this type of valve are the simple construction not taking up too much space, and the light weight and lower cost compared to other valve designs. The valves can be operated by handles, gears or actuators according to any specific need.
Features and Benefits The double eccentric design offers an optimal sealing performance. Smart stainless steel seat, very low torque - easy to be operated. The EPDM rubber ring was fixed on the edge of the disc by the retainer ring, easy to be replaced. Eccentric pin connect the disc and stem, not destroy the structure of the stem, make sure the safety and strength. Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598 Technical Data Nominal Diameter: DN300~DN2400(12"~96") PN10 DN300~DN900(12"~36") PN16 Temperature Range: -5 C~85 C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Cast Iron Dual Plate Check Valve API 594 Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Spring Loaded, Retainerless Design Disc : Ductile Iron / SS 304 / SS 316 Spring : SS 316 Body Seat : Resilient (BUNA-N / EPDM) Ends : Wafer Type, Lugged, Flanged Item Code : CI000085 Size : 50mm Notes : Available Valve Size PN-16 50mm to 900mm PN-25 50mm to 900mm PN-125 50mm to 900mm
Cast Steel Dual Check Valve (Retainerless Design) API 594 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Spring Loaded, Retainerless Design Ends : Wafer, Lugged, Flanged Specials : IBR Item Code : CCS00069 Size : 50mm Notes : Available Valve Size : CLASS -150 40 mm to 1200mm CLASS -300 40 mm to 900mm CLASS -600 40 mm to 900mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Areas where highly corrosive materials are used in the chemical process and plants. Industries where the critical application like food, pharma and fine chemicals. To control environment pollution. FEATURE Best quality in class with excellent performance. Excellent corrosion resistance to the chemicals. Maintenance Free/Long Service life cycle/Easy Installable, ensuring cost reduction in production and maintenance. QUALITY CONTROL High Voltage electric spark test-all lined components. Standard Hydraulic Test (15 kg/cm3) of Body and seat (10 kg/cm3) Virgin lining materials used-FEP/PFA. Size: 40 NB to 350 NB LINNING Thickness: Spark Test : 3.0 to 3.5 mm Mini. Over all wetted parts. 15k.v.D.C. Teflon FEP/PFA Type Service : Temp. : Teflon (FEP) Max-160�°C Teflon (PFA) Max-205�°C
Features and Benefits Wider EPDM seat design, replaceable, its suit for different type of flanges. ISO5211 standard top flange, suit for different operations. Eccentric pin on the stem, not destroy structure of the stem, make sure the safety and strongth. Lever operation BWLX: DN50~DN150. Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598 Technical Data Nominal diameter:DN50~DN150(2"~6") Nominal pressure: PN16 Working temperature: -5C ~ +85C Sealing test:1.1PN Shell test:1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Technical Data Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16 Working temperature: -5C ~ +85C Sealing test:1.1PN Shell test:1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Design: EN 593, API 609. Face to Face: EN 558-1, Flange: BS EN 1092, ANSI B16.5. Size: DN40 - DN1200 . Nominal Pressure: PN10/PN16. Working Temperature: -10centigrade degree - 135centigrade degree. Appropriate Medium: Air, Water, Sewage, Steam, Coal, Gas, Oil. Drive Modality: Hand drive, Worm wheel drive, Pneumatic drive, Electric drive. Materials: Body, CI-NBR/EPDM or DI+NBR/EPDM. O-ring, Rubber.
*butterfly valve O wafer type / lugged type butterfly valve O flanged butterfly valve O concentric / eccentric butterfly valve O triple offset butterfly valve *butterfly valve O wafer type / lugged type butterfly valve O flanged butterfly valve O concentric / eccentric butterfly valve O triple offset butterfly valve
Trim : Cast Iron/Ductile Iron/SS 304/ SS 316 Rating : 150#, soft seated and metal seated Concentric wafer type: Size 40 mm – 600 mm Lug type : Size 40 mm to 600 mm Eccentric flanged end : Size 50 mm – 1200 mm Double Eccentric flanged end : Size 50 mm – 1200 mm Triple Eccentric – Size 50 mm – 1200 mm
Approx. Price: Rs 250 / Unit We are involved in offering a wide range of Butterfly Valves. Following the precise demands of clients, we offer these products in various range, specifications and sizes. Manufactured using high quality components, these valves are acclaimed for their maximum durability, reliability and corrosion resistance. One can avail these products at very affordable prices As per the industry standards Effectiveness Robust
