Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. Production occurs through distillation, which removes lighter crude oil components like gasoline and diesel, leaving the heavier bitumen behind. Bitumen deposits can also occur naturally at the bottom of ancient lakes, where prehistoric organisms have decayed and been subjected to heat and pressure. Wholesale Bitumen
Bitumen is a black, semi-solid or liquid substance with high viscosity produced by the non-destructive distillation of crude oil during petroleum refining. The core industry using bitumen is road construction (asphalt) and another significant field is the building industry (roofing membranes, water-proofing felts)
Methanol Technical Data Sheet Property Specification Analytical Test Methanol Purity WT % 99.85 min IMPCA 001-21 Water W/W% 0.100 Max ASTM E91064 Ethanol W/W% 0.0050 Max IMPCA 001-21 Specific Gravity 20/20,C 0.7928 Max. ASTM D-4052 Acetone, W/W% 0.0030 Max. IMPCA 001-21 Permanganate Time Test @ 15 C, Minutes 60 Min. ASTM D-1363 Non Volatile Matter, mg/1000 ml 8 Max. ASTM D-1353 Distillation Range @ 760mm Hg C 1.0 Max., ASTM D-1078 Color Pt-Co, APHA 5 Max. ASTM D-1209 Carbonizable APHA 30 Max ASTM E-346 Total Iron, mg/kg 0.10 Max ASTM E-394 Chloride as CI, mg/kg 0.5 Max ASTM D-512 Appearance Clear and free from suspended matter IMPCA 003-98 Acidity as CH3COOH, W/W% 0.0030 Max, ASTM D-1613 Hydrocarbons Pass Test ASTM D-1722 Sulphur mg/kg 0.5Max, ASTM D-5623 Aromatics, UV Test Passes Test IMPCA 004-15
RCS 002 BITUMEN EMOLUSION ( BITUMEN PRIMER ) RCS 001 BITUMEN ( BITUMEN PRIMER ) RCS 003 BITUMEN RUBBER SOLUTION WATERPROOFING RCS 004 SBS RUBBER BASED ELASTROMETRIC LIQUID MEMBRANE RCS120 BRB ANTI ROOT ELASTIC BITUMEN LIQUID MEMBRANE RCS ECO RUBBER BASED LIQUID BITUMEN MEMBRANE RCS 1C RUBBER MODIFIED , WATER BASED ELASTROMETRIC BITUMEN MEMBRANE SCS 2C RUBBER BASED , CEMENT AND FIBRE MODIFIED 2 COMPONENT BITUMEN MEMBRANE
Our company is direct supplier of bitumen product , we guarantee lowest price around the world do not hesitate to contact us for price.
Bitumen is used in road construction due to various properties and advantages. The bitumen as a raw material in flexible road construction and bitumen as a mix (composing other materials i.e. aggregates etc.) serves certain advantages, that prompt to use bitumen widely in road construction. An overall bitumen mix is used in the construction of flexible pavement to serve the following needs Structural Strength Surface Drainage Surface Friction
Product Details: Storage : Dry Place Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Application : Industrial Supply Ability : 2500000 Kilograms Per Month Price And Quantity Minimum Order Quantity : 50 Kilograms Product Specifications Storage : Dry Place Application Industrial Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Trade Information Payment Terms : Cash in Advance (CID) Supply Ability : 2500000 Kilograms Per Month Delivery Time : 1 Week Main Domestic Market : All India Product Description Industrial Bitumen we offer has multiple uses in industries with wide range of applications. It has all major traits such as plasticity, adhesion, resistance to acids, waterproofing and more. This is an inexpensive as well as safe material to be used in various industries. It is used in construction industry, making roads, roofing and more. The major usage of Industrial Bitumen is in road construction as it is cost effective as well as durable when used with concrete.
Superior Quality Functional Bitumen, sourced from the best refineries, our bitumen meets international standards for quality consistency. This bitumen is obtained by blowing hot air at a temperature of 200 to 300 degrees into pure bitumen. with a strong logistic network, we gaurantee timely and secure delivery to your projected port.
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Coal tar pitch, a kind of artificial pitch, is generally viscous liquid, semi-solid or solid. It is black and shiny. In the process of coal tar processing, the residue after the liquid fraction is removed by distillation is called coal tar pitch. Coal tar pitch is the main component of coal tar, accounting for 50%~60% of the total amount. Generally, it is believed that its main components are polycyclic aromatic hydrocarbons, polycyclic aromatic hydrocarbons and their derivatives.The specific composition of the compounds is complex,and the difference of raw coal types and processing technology will also lead to the difference of components, The current method is mainly based on the softening temperature.