Our Covid-19 rapid test kits are a serology test using a novel way to identify to identify exposure to the Covid-19 virus by the identification of the IgM/IgG antibodies through a sample of serum, plasma or whole blood. The presence of the antibodies is revealed in 15 minutes and does not require any specialised laboratory equipment for the execution of the test. Test kits are packaged with 25 sealed pouches holding the test cassettes, an instruction set, 25 capillary tubes for making 25 tests and a bottle of 3ml with buffer solution to execute 25 tests. The test pouch contains the test cassette and a sterilizer pad to be used to disinfect the fingertip in case of fingerprint blood sampling. (A) Name of product: COVID-19 IgM/IgG Antibody Rapid Test (B) Price $4 EXW (c) Origin: Canada (d) Features: Artron COVID-19 IgM/IgG Antibody Test is a rapid, qualitative, and convenient immunochromatographic in vitro assay for the differential detection of IgM &/or IgG antibodies to SARS-COV-2 in human serum, plasma or whole blood samples. The device is designed to aid in the determination of recent or previous exposure to SARS-COV-2 virus tracking the bodyâ??s immunity status to the virus after SARS-COV-2 infection. (E) HS code:382200 (F) 20,000 units (g) Carton Size (LxWxH cm) 59*41*37 - 2,200 test per carton. 17.6kg. 25,000 kits per pallet.
Made in Canada Health Canada approved CE Mark and ISO certified The product has proven to have 100% Specificity and 96% Sensitivety Stock availabity: 2 Million tests/kit in Canada Production: up to 5 Million tests/kit weekly The Rapid Response COVID-19 Antigen Rapid Test Device is an in vitro immunochromatographic assay for the direct and qualitative detection of SARS-CoV-2 viral nucleoprotein antigens from nasal and nasopharyngeal secretions from individuals suspected of COVID-19 within 6 days of symptom onset. This test is authorized for use at the Point of Care i.e., in patient care setting. Results are for the identification of SARS-CoV-2 viral nucleoprotein antigen. Antigen is generally detectable in nasopharyngeal and nasal secretions during the acute phase of infection. Positive results indicate the presence of viral antigens, but clinical correlation with patient history and other diagnostic information is necessary to determine infection status. Positive results do not rule out bacterial infection or co-infection with other viruses. The agent detected may not be the definite cause of disease. Laboratories are required to report all positive results to the appropriate public health authorities. Negative results should be treated as presumptive, and do not rule out SARS-CoV-2 infection and should not be used as the sole basis for treatment or patient management decisions, including infection control decisions. Negative results should be considered in the context of a patientâ??s recent exposures, history, and the presence of clinical signs and symptoms consistent with COVID-19, and confirmed with a molecular assay, if necessary, for patient management. The Rapid Responseâ?¢ COVID-19 Antigen Rapid Test Device is for use at the Point of Care for professional use only. PRODUCT INFORMATION: Product: Rapid Respose Sample: Nasal / Nasopharyngeal secretions Format: Cassette Quantity: 25 Tests/Kit per box Time to result: 15 minutes Storage Condition: 2-30 C/36-86 F Test Principle: Immunochromatographic Assay CONTENTS - Individually packed test devices Extraction Buffer Extraction tube Nozzle with filter Tube stand Individually packed swabs Package Insert
This Assy-PCB-Data Relay W/ IC is suitable for Oc�© Arizona 250 GT & Fujifilm Acuity Advance HD2504 printers. This is the original Oc�© part (number 3010110609). SKU: 3W3010110609 Manufacturer part number: 3010110609 Printer compatibility : Fujifilm Acuity Advance HD2504 Canon Oc�© Arizona 250 GT Products specifications : Type : Other Boards More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068). The following items are expressly excluded from warranty coverage: defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes defects related to improper loading of media all other defects, failures or damage not considered manufacturing defects defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system. defects that are merely cosmetic in nature. Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle This printhead carries a manufacturer warranty. Country of origin : Japan Compatible firmware: UJV55-320 FW Ver. 2.5 or later SIJ-320UV FX Ver. 1.90 or later SWJ-320EA FW Ver. 1.30 or later UJV500-160 FW Ver. 2.00 or later JFX500-2131 FW Ver. 3.40 or later More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
ELECTRICAL Model JXT-BMD1920-2170-12 Frequency Range 1920-2170-MHz Bandwidth 250-MHz Gain 12-dBi Beamwidth H: 36- E: 32- F/B ratio ¡Ý18-dB VSWR ¡Ü1.5 Polarization Horizontal or Vertical Max power 100 ¨CW Nominal Impedance 50 MECHANICAL Connector --- N female or customized Dimension 0.5-M Weight 0.7-KG Element 10 Material Aluminum Alloy Rated Wind Velocity 60-m/s Mounting Kits U bolts
Key Features Hasselblad 20MP / UHD 4K Gimbal Camera 1" CMOS + f/2.8-f/11 Adjustable Aperture Fly More Kit Accessory Bundle 1 Year of DJI Care Refresh Included DJI Mavic 2 Pro Performance Maximum Takeoff Weight 2.00 lb / 907 g Maximum Horizontal Speed 44.7 mph / 72 km/h (S-Mode) Maximum Ascent Speed 16.4 ft/s / 5 m/s Maximum Descent Speed 9.8 ft/s / 3 m/s Maximum Wind Resistance 23.6 mph / 38 km/h Flight Ceiling 3 mi / 6000 m Maximum Flight Time 31 Minutes Maximum Hover Time 29 Minutes Maximum Tilt Angle 35° Hovering Accuracy ±0.33' / 0.1 m Vertical with Vision Positioning ±1.64' / 0.5 m Vertical with GPS ±0.98' / 0.3 m Horizontal with Vision Positioning ±4.92' / 1.5 m Horizontal with GPS Flight Control System GNSS Support GPS, GLONASS 3D Object Detection Operating Range 36.1 to 131.2' / 11.0 to 40.0 m Required Object Reflectivity >20% Vision System Vision System Downward, Forward, Backward, Left, Right Operating Range 1.6 to 131.2' / 0.5 to 40.0 m Obstacle Sensory Range 36.1 to 131.2' / 11.0 to 40.0 m Forward Field of View 40° (Horizontal) 70° (Vertical) Backward Field of View 60° (Horizontal) 77° (Vertical) Operating Environment Surface with Clear Patterns at >15 lux Remote Controller / Transmitter Operating Frequency 2.4 GHz (2.400 - 2.483) 5.8 GHz (5.725 - 5.850) Maximum Operating Distance 4.97 mi / 8000 m at 2.4 G 4.97 mi / 8000 m at 5.8 G Transmitter Power 26 dBm (2.4 G) 26 dBm (5.8 G) Connectivity 1 x Lightning 1 x Micro-USB 1 x USB Type-C Battery Type 1 x Built-In Battery Chemistry Lithium-Ion Battery Capacity 3950 mAh Battery Configuration 1 S / 3.83 V Mobile Device Compatibility Devices up to 6.30" / 160 mm Wide and 0.3" / 7.62 mm Thick Operating Temperature 32 to 104°F / 0 to 40°C Camera Sensor 1" CMOS Effective Pixels 20 MP Lens Field of View 77° Aperture f/2.8 - 11 Minimum Focusing Distance 3.3' / 1.0 m Photo ISO Range 100 - 3200 (Auto) 100 - 12,800 (Manual) Video ISO Range 100 - 6400 (Auto) Electronic Shutter Speed 8 - 1/8000 Second Photo Resolution 3:2: 5472 x 3648 Photo Format JPEG, DNG Video Format 3840 x 2160p at 24/25/30 fps 2688 x 1512p at 24/25/30/48/50/60 fps 1920 x 1080p at 24/25/30/48/50/60/120 fps Recording Media microSD (up to 128 GB) Photo Modes Auto-Exposure Bracketing (AEB), Burst Shooting, Interval, Single Shot Gimbal Number of Axes 3 (Pitch, Roll, Yaw) Control Range Pitch: -90 to 30° Yaw: -75 to 75° Angular Speed Pitch: 120°/s Flight Battery Battery Chemistry Lithium-Ion Polymer (LiPo) Capacity 3850 mAh / 59.29 Wh Battery Configuration 4 S / 15.4 V Maximum Charging Power 80 W Charging Temperature 41 to 104°F / 5 to 40°C Weight 10.48 oz / 297 g Charger AC Input Power 100 to 240 VAC, 50 / 60 Hz at 1.8 A Output Voltage 17.6 V, 3.41 A 17 V, 3.53 A 5 V, 2 A Power Rating 60 W
Coordinate measurement machine A machine - ncf1087 bridge coordinate measuring machine - calibrate ball with support base -uk renishaw ucc lite control system 430, 000/1set B. Computer system - minimum configuration: pentium 3.0 ghz/1gb ram/120gb hard disk/128mb graphic card /17color lcd monitor/ window»s os - hp color deskjet printer 10, 000/1set C. Usa software system America rational-dims software package (for windows xp) 80, 000/1 set D. Probe system - renishaw ph10t manual head 100, 000/1 set - renishaw tp200 high accuracy probe 30, 000/1 set -renishaw probe styli kit 3, 000/1 set Eú« voltage stabilizer 3, 000/1set F machine calibration standard tools Gauge blocks, 20, 000/set G. Installation at customer site System installation includes start-up, adjust and metrology test. The metrology test will be performed according the ú¿gb/t16857.2-1997ú¬standard regulation and it equal to iso 10360-2. The buy afford trip ticket and room and board fees. H application training - training on the cmm operation & application 5-8 working days at the user»s site. The buy afford trip ticket and room and board fees. Warranty 12 months guarantee free of charge after final acceptance. The buy afford trip ticket and room and board fees. Carton
NCM Specifications A. Machine - NC454 MACHINE with Crenshaw Scale, Sanyo motor - RENISHAW UCC Lite-2 Control System - Calibrate Ball with Support Base - User and System Manuals B. Computer System - Minimum configuration: Pentium ó(3.0 GHz/512MB RAM/80GB Hard Disk/32MB Graphic Card /17ísColor LCD Monitor/ Windows XP OS - HP Color DeskJet printer C. Software System - AMERICA Rational-DIMS Software Package (for Windows XP)(Named OPEN DMIS in USA) D. Probe System - PH10T Renishaw Motorized Probe Head - TP20 Renishaw Touch Probe - Renishaw Probe Styli Kit -MCR20 automatic probe changer (including one more TP20 probe head) E. Installation at Customer Site System installation includes start-up, adjust and metrology test. The metrology test will be performed according the ú¿GB/T16857.2-1997ú¬standard regulation and it equal to ISO 10360-2. F. Application Training Training on the CMM operation & application 5 working days at The Userí»s site. G. Warranty 12 Months guarantee free of charge after Final Acceptance. During Warranty time if CMM get wrong not due to man-made reason Leader will do service free of charge and after warranty time CMM get wrong, Leader will supply service at good service price wooden box suitable for sea shipment
EW200 alkali free glass fiber cloth uses advanced microwave drying equipment to dry the whole roll of cloth evenly inside and outside, with moisture content 0.1%. The cloth surface shall be clean, neat, uniform in color and free of foreign matters. Different widths and weights can be produced on demand. SEAL KIT FOR ACCUMALATOR 0.288815176 DUPLEX OIL FILTER DQ150AW25H1.0S Turbine main valve switch solenoid valve 4WE10DL3X/CW220NZ5L CASE EXPANSION PR9350/02 Battery 2V,2000Ah Current Transformer LBJ1-900A/10V Temperature probe WZPM2-201 Filter return CRA110CD1 Stroke sensor TD-1 Speed Sensor CS-1 D-100-02-01 Option switch ZB2BD2C Globe Check Valve LJC100-1.6P Vibration isolator JG 4-2, JG 4-3, JG 4-4 RTD sensor WZPK2-16A VOLTAGE TRANSFORMER JDZX-20 Glass fiber cloth EW200 Reducer B1, F4281-MANU010-0010-M02-007 VELOCITY SEISMOPROBE 9200-01-20-10-00 Rotation Speed Sensor TO3S Board Power factor measurment transducer TS20-PD-3A-165A4B FISHER POSITION DVC2000 Tachometer HZQW-03A LEVEL SWITCH LOW LOW 103W1-K212-N4-C14-X2 Igniter oil supply fow 2 surface header 1700C12ABAMZZZ Indicator light XB4BVM1 Power Supply Desalination S-100-24 Sensor Proximity Turbin� TM0180-08-00-05-10-02 Generator Excitation system board Oil meter XOC-02 Sensor Vibration NE360-V-O4-1-0-0 RAPPING BOARD DHEP-DYJKB-070315A CARD MODULE DZW20-24-A00-WK-ZTD24 Fuse Fan Board UM-MSTB-MKDS/F/CS1148 "O" type Seal ring HN 7445-250x7.0 Fan control board SDP-PR-3FC Hydraulic oil filter TL147 BLADDER NXQ-A-10/20 FY Glass Flowmeter LZB-4WF MANUAL GATE VALVE RVHX-10Q AIR LIMIT SWITCH A1011 Glass fiber cloth EW200 DF2022-2-12-JERRY
We got Outboard Motor Engines for sale at VERY VERY CHEAP affordable prices. Varieties of them, both 2 strokes and 4 strokes motors. Our prices far cheap WE ARE SUPPLIERS OF HIGH QUALITY YAMAHA OUTBOARD ENGINES BOTH USED AND NEW. WE HAVE A WIDE RANGE OF 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP AND MORE WE ALSO HAVE V MAX SHO, JET DRIVE/HIGH THRUST, FOR STROKE, XTO OFFSHORE OUR OUTBOARDS INCLUDES MERCURY VERADO YAMAHA OUTBOARDS YAMAHA FOURSTROKE OUTBOARDS HONDA SUZUKI AND MANY MORE EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. The all-new four-stroke, 5.6L V8 425 hp XTO Offshore is more than an outboard. Itâ??s an integrated power system. Coursing with insightful engineering and industry-first technology such as an electric steering system, itâ??s revolutionizing offshore boatingâ??and the ownership experienceâ??for yacht-class boaters. LEGENDARY YAMAHA RELIABILITY. oUR Outboards have delivered far more than superior power, performance and efficiency. Yamaha owners get something that canâ??t be measured in HP or RPMâ??legendary Yamaha reliability. The all-new Yamaha V8 XTO Offshore�® carries on that tradition. Purpose-built from the ground up to withstand the rigors of offshore boating, the XTO introduces a new class of extreme offshore power and reliability. Our integrated digital boat control system now features Set Point. This suite of satellite-guided boat control functions automatically maintains your position, heading or both. Suddenly fishing beneath the boat, controlled drifting and waiting in place are a snap for captains of any skill level. Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
Welding type corrugated pipe globe valve KHWJ15F 1.6P Facing the changes in the energy industry, YOYIK keeps pace with the times, not only focusing on the optimization and upgrading of traditional power generation equipment, but also deeply studying new energy technologies and developing a series of accessories suitable for new energy power generation systems, showing the company's keen insight and forward-looking layout of future energy development trends. While promoting its own development, YOYIK does not forget to fulfill its social responsibilities, is committed to environmentally friendly production, implements energy-saving and emission reduction measures, uses environmentally friendly materials, and reduces environmental pollution. We have diversified supply of various spare parts required for power stations, as follows: #DF-Welding type corrugated pipe globe valve KHWJ15F 1.6P-DF lubricant oil cooler sealing strip N35-MGS-16C/2 Extraction check valve solenoid valve SK9189 Centrifugal oil pump 80AY100X2C Packing kit B05-8076Z-34TS Sewage oil pump 2CY-12/1.0 globe valve straight pattern WJ15F3.2P throttle valve RV5-10-0-35/ Circulating sump drainage pump YW80-65-125X2.5 Hexagonal socket head cap screw M10*40 Main steam header safety valve 1735WD-2-S-106-F3 Hexagon tube plug Q/D9403 NPT1 1/2 SOLENOID COIL MFJ1-4 By-pass valve HC3402A3-08 Cooling fan HIER 465117 P001 Sealing oil differential pressure valve cup E130-F22 Bellows valves WJ32F-16PDN32 double stop valve 80FJ1.6P IGV SERVO VALVE ELECTRO HYDRAULIC FLOW CONTROL DNC21NF58N automatic transmission lube pump 100LY-215-5 vacuum pump oil filter bush P-1761-1 pressure hose SMS-10-1524-C Oil Throw Sleeve HZB253-640-01-06 Warm air drain pump GSSN-2 pressure relief valve YSF8-35/80-KJTH butterfly valve DSF4PB3-16-150 Sealed cooling housing FAID67-03-04 Stainless steel globe valve J41W-16P Oil drain valve seal assembly + float ball PY40 HTD02.00 PNEUMATIC ACTUATOR RP75DA pressure hose SMS-15-1524mm-B Dome valve insert seal DN100, P/N. P1586C-01 Accumulator bladder NXQB-40/20-F-E CHANNEL SWITCHING VALVE 6 WAY VALVE AMI A-82.542.000 Accumulator bladder NXQA-B-40/31.5-L-K triple screw pump HSNH440Q2-46NZ Generator axial bearing 6030M/C3VL2071 Welding type corrugated pipe globe valve KHWJ15F 1.6P Welding type corrugated pipe globe valve KHWJ15F 1.6P ZYR-DFYL-2025-1-13
Welding type corrugated pipe globe valve KHWJ15F 1.6P Facing the changes in the energy industry, YOYIK keeps pace with the times, not only focusing on the optimization and upgrading of traditional power generation equipment, but also deeply studying new energy technologies and developing a series of accessories suitable for new energy power generation systems, showing the company's keen insight and forward-looking layout of future energy development trends. While promoting its own development, YOYIK does not forget to fulfill its social responsibilities, is committed to environmentally friendly production, implements energy-saving and emission reduction measures, uses environmentally friendly materials, and reduces environmental pollution. We have diversified supply of various spare parts required for power stations, as follows: #DF-Welding type corrugated pipe globe valve KHWJ15F 1.6P-DF lubricant oil cooler sealing strip N35-MGS-16C/2 Extraction check valve solenoid valve SK9189 Centrifugal oil pump 80AY100X2C Packing kit B05-8076Z-34TS Sewage oil pump 2CY-12/1.0 globe valve straight pattern WJ15F3.2P throttle valve RV5-10-0-35/ Circulating sump drainage pump YW80-65-125X2.5 Hexagonal socket head cap screw M10*40 Main steam header safety valve 1735WD-2-S-106-F3 Hexagon tube plug Q/D9403 NPT1 1/2 SOLENOID COIL MFJ1-4 By-pass valve HC3402A3-08 Cooling fan HIER 465117 P001 Sealing oil differential pressure valve cup E130-F22 Bellows valves WJ32F-16PDN32 double stop valve 80FJ1.6P IGV SERVO VALVE ELECTRO HYDRAULIC FLOW CONTROL DNC21NF58N automatic transmission lube pump 100LY-215-5 vacuum pump oil filter bush P-1761-1 pressure hose SMS-10-1524-C Oil Throw Sleeve HZB253-640-01-06 Warm air drain pump GSSN-2 pressure relief valve YSF8-35/80-KJTH butterfly valve DSF4PB3-16-150 Sealed cooling housing FAID67-03-04 Stainless steel globe valve J41W-16P Oil drain valve seal assembly + float ball PY40 HTD02.00 PNEUMATIC ACTUATOR RP75DA pressure hose SMS-15-1524mm-B Dome valve insert seal DN100, P/N. P1586C-01 Accumulator bladder NXQB-40/20-F-E CHANNEL SWITCHING VALVE 6 WAY VALVE AMI A-82.542.000 Accumulator bladder NXQA-B-40/31.5-L-K triple screw pump HSNH440Q2-46NZ Generator axial bearing 6030M/C3VL2071 Welding type corrugated pipe globe valve KHWJ15F 1.6P Welding type corrugated pipe globe valve KHWJ15F 1.6P ZYR-DFYL-2025-1-13
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them, both 2 strokes and 4 strokes motors. We Are Suppliers Of High Quality Yamaha Outboard Engines Both Used And New. We Have A Wide Range Of 350hp, 300hp, 250hp, 200hp, 150hp, 100hp 75hp, 60hp 40hp And More We Also Have V Max Sho, Jet Drive/high Thrust, For Stroke, Xto Offshore Our Outboards Includes Mercury Verado Yamaha Outboards Yamaha Fourstroke Outboards Honda Suzuki And Many More Extreme Offshore Performance And Durability Not To Mention Striking Good Looks. The all-new four-stroke, 5.6L V8 425 hp XTO Offshore is more than an outboard. Itâ??s an integrated power system. Coursing with insightful engineering and industry-first technology such as an electric steering system, it's revolutionizing offshore boating and the ownership experience for yacht-class boaters. LEGENDARY YAMAHA RELIABILITY. oUR Outboards have delivered far more than superior power, performance and efficiency. Yamaha owners get something that can't be measured in HP or RPM legendary Yamaha reliability. The all-new Yamaha V8 XTO Offshore�® carries on that tradition. Purpose-built from the ground up to withstand the rigors of offshore boating, the XTO introduces a new class of extreme offshore power and reliability. Our integrated digital boat control system now features Set Point. This suite of satellite-guided boat control functions automatically maintains your position, heading or both. Suddenly fishing beneath the boat, controlled drifting and waiting in place are a snap for captains of any skill level. Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
Found more at Demawati.com . Toshiba CA3W Printhead for Mimaki UJF-605RII / Océ Arizona 200 GT Price : $749.00 Availability:In Stock Brand: Toshiba Product Code: DIS0116. This Toshiba CA3L print head is suitable for Fuji Aquity 2504 and Oce Arizona 250GT printers. Unlike conventional binary printheads, this grayscale printhead technology of jetting multiple drops within one dot allows for an image to have 8 level grayscale, since each dot is created through a minimum of 6 pl to a maximum of 42 pl of ink. This enables the image to express near photo quality. Revolutionary single passspeed quality priting is achievable with its unique precise piezo process and driving technologies, offering accurate dot placement and jetting reliability. Compatibility with both UV curable and oil based pigment ink allows printing on various types of substrate, both porous and non-porous. The CA3 is packaged printhead with chassis which provides built-in water channel and complete sealing designed for easy temperature control. This head is delivered in a sealed Toshiba box with a head ID? waveform and voltage. This printhead carries a product warranty.
Price US$429.00 Description: This Toshiba TEC CA4W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink. The Toshiba TEC CA4W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Toshiba original printhead. It carries a one year warranty. The jig tools used to calibrate and fit this head are available as related products. To be used with: Mimaki UJF-605CII, Oce Arizona 300 GT / Arizona 350 GT / Arizona 350 XT / Arizona 360 GT / Arizona 360 XT / Arizona 318 GL, Fujifilm Acuity Advance LT / Acuity Advance HD2545 / Acuity Advance HD2545W / Acuity Advance HD2545 X2 / Acuity Advance HD2565 / Acuity Advance HD2565 X2, EFI Rastek H650 / Rastek H700 Specifications : Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 90 pico litre Maximum Grayscale Levels: 16 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 31 V Ink Compatibility: Oil Based pigment ink and uv ink
What's In The Box: SureColor P-Series Printer Printer Stand with Catch Basket Spindle-free Roll Media Adaptors Set of eleven 110 ml initial ink cartridges Ink Maintenance Tank(s) (installed) AC Power Cable User Guide Kit (Documentation and Warranty) Software is provided via download Sample roll - Epson Doubleweight Matte Paper for print head alignments General: Operating Systems: Apple macOS® 10.13.x-10.12.x, OS X®: 10.11x-10.7x Microsoft® Windows®: 10, 8.1, 7 (32-bit, 64-bit) Temperature:Operating: 50 ° to 95 °F (10 ° to 35 °C) Operating (recommended): 65 ° to 75 °F (18 ° to 24 °C) Storage: -4 ¢ª to 104 ¢ªF (-20 ¢ª to 40 ¢ªC) Humidity:Operating: 20 - 80% (no condensation) Operating (recommended): 45 - 60% (no condensation) Storage: 5 - 85% (no condensation) Sound Level:Less than 47 dB(A) according to ISO 7779 Dimensions:Basket closed: 53.4" x 26.3" x 48" (1356 x 667 x 1218 mm) Weight:223 lb (101 kg) Warranty:Standard one-year usually next-business day on-site repair with toll-free phone support Monday through Friday
Sht20 digital temperature and humidity sensor product summary The sht20 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit - all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht20 digital temperature and humidity sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package reflow solderable Sht20 digital temperature and humidity sensor performance Size: 3 x 3 x 1.1 mm Output: i²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2µw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
Sht21 digital humidity and temperature sensor product summary The sht21 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip - which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht21 digital humidity and temperature sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package - reflow solderable Sht21 digital humidity and temperature sensor performance Size: 3 x 3 x 1.1 mm Output: iâ²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2âµw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
Go back in time and raise it up with the GT Pro Performer 20. Roll on the past or relive your childhood on the GT Heritage line. Inspired by GT Freestyle roots loaded with the details to make these vintage inspired bikes as legendary as their predecessors. Vintage in style, thereâ??s nothing old about the features loaded onto the Pro Performer 20. Kitted out with GT 86 Performer Design Fork, Full Cr-Mo, 1pc. Steerer and GT Power Series Alloy 3pc cranks, the peg sized G-1 Chain Tensioners keep the wheel tight and there plenty of grip from the GT LP-5 tyres.
Hgst 8tb deskstar 7200 rpm sata iii 3.5" internal nas drive kit mfr # 0s04012 8tb storage capacity 3.5" form factor Sata iii 6 gb/s interface 128mb cache 7200 rpm 1 million hours mtb f
